Textile scientists make researches for producing new types of fibers as well as modifying the existing fibers to provide new raw materials for technical textile applications. The easiest way of modifying fiber physical properties is to change the cross sectional shape of a synthetic fiber. Also, composite fibers loaded with different kinds of additives attracted the attention of researchers in the last decades for functionalizing fibers. Some other methods like coating, exhausting, padding or other novel methods can be used for the same purpose. But in these methods, the functional effect is generally not durable enough against several times of washing and abrasion. Also, these methods usually require higher consumption of water and heat when compared to composite fiber production. As a result, in this work the effect of cross sectional modification and composite fiber production were combined in the same fiber. One of the most important functional properties which can be provided by composite fiber production is antibacterial activity. Only a few research papers were published on antibacterial additive doped polypropylene fibers. In this work cupric oxide (CuO) doped antibacterial composite polypropylene (PP) fibers having different cross sectional shapes (circular, trilobal and triangular) were produced and the effect of cross sectional shape and CuO on the antibacterial activity, structural and mechanical properties of the fibers were investigated for the first time. Cross sectional and longitudinal images of composite fibers were evaluated by using optical microscope and scanning electron microscope (SEM). As the released content of active agent is an important parameter for the activity, durability, environmental and health effect of the product, the copper release from the fibers into the water media was investigated by inductively coupled plasma optical emission spectrometry (ICP-OES). Thermal analysis results showed that PP/CuO composite filaments having three different cross sectional shapes can be produced without any significant changes on thermal behavior of fibers. With the increasing content of cupric oxide, tenacities of fibers slightly decreased. Cupric oxide particles also led to some crystallinity changes. All of the composite fibers showed good antibacterial activity against Gram-negative bacterium Escherichia coli.
Impregnation of nano‐metal oxides can provide functional properties to textiles, like UV protection and self‐cleaning properties. These properties are quite important as they can provide protection against UV damage, help to reduce cleaning efforts, improve the ease of maintenance, and help to protect the water resources. The usage of nanoparticles improves multifunctional effects due to their high surface area. Therefore, in this study, nano‐sized TiO2 and ZnO were applied to cotton fabrics as single type or hybrids with different concentrations to reveal their effects on multifunctional properties (UV‐protection, self‐cleaning, wettability, photocatalytic activity). Also, the weight and air permeability of samples were determined to evaluate their usability. Scanning electron microscopy, x‐ray diffraction and Fourier transform infrared spectroscopy were also utilized to analyze the samples. According to the results, some samples exhibited good–very good UV protection. Up to 78.5% photocatalytic degradation of organic dye was achieved by nano‐TiO2 application. According to self‐cleaning test results, nano‐TiO2 applied samples showed yellowing after UV irradiation. Hybrid‐coated samples were more advantageous regarding self‐cleaning, especially against cherry juice stains. The staining and wettability results of the samples were in accordance. Weight and air permeability changes were acceptable to maintain the usage of the samples for clothing and other applications.
Sewing quality is an important factor that contributes to the overall quality of an end-product. Sewing quality compro - mises different components such as bending, seam strength, seam slippage, elasticity etc. Among these components, bending has a special importance because of causing changes in appearance, sensorial comfort and drape of a garment. Therefore, in this study, effects of stitch type and seam direction on the bending rigidities of sewn fabrics were evaluated and compared. A polyester woven fabric which is suitable for sportswear was sewn with three basic stitch types (lock stitch, chain stitch and overlock stitch), in 5 different directions (warp, weft, 30°, 45° and 60° angles). As reference, samples without stitches were tested, too. Bending properties of samples were determined via heart loop method. According to the results, sewing increased the fabric bending rigidity. The degree of bending rigidity increment was dependent on the stitch type. Highest bending rigidity values were obtained for overlock stitched samples those were approximately 4 times higher when compared to non-sewn reference samples. Thickness of sewn parts was in accordance with the bending rigidity results. For oriented seams, bias sewing especially for 45˚ oriented samples, showed the most advantageous bending results. This study showed the usability of heart loop method for sewn samples via consistent results for different stitch types and seam directions.
Fabrics are cut and sewn to form 3-dimensional end-products. Bending rigidity is one of the properties that should be interpreted for sewn fabrics as it can affect drape, appearance and sensorial comfort of a garment. In the literature, there are several methods to measure the bending behaviours of fabrics. Parallelly, a variety of tests were employed for bending rigidity of sewn samples but their comparability for sewn samples are not known. In this study, 3 simple and standard test methods were used to compare the bending behaviours of fabrics with plied edge seams. Statistical analysis showed that, circular bend method had no or low correlation with cantilever and heart loop methods. Also any difference between the different types of sewn samples could not be detected by this method. In contrast, results of cantilever and heart loop methods showed low to moderate positive correlations for the bending lentghs and bending rigidities of samples.