A significant portion of the water supplied to people doesn’t reach its valid users but instead leaks out of the distribution network, causing water wastage, revenue loss and contamination risks. This paper analyses the leakage rate, leakage components and leakage reduction potential. A minimum night flow (MNF) analysis was carried out on a district metered area (DMA) in an intermittent supply system in Zarqa, Jordan. Leakage was modelled and leakage reduction policies were analysed. Results show that MNF occurs at night or during day time depending on the water levels in customer tanks, implying that one-day MNF analysis cannot be carried out in intermittent supplies and the estimation of the legitimate consumption during MNF is more influential. The potential water savings of the different leakage reduction measures (pressure management; leakage detection; response time minimization) are separately analysed in the existing models in the literature, leading to significant overestimation of the total leakage reduction potential, while these measures are influencing each other. Pressure reduction lowers the failure frequencies but limits the potential of leakage detection surveys, as leaks will become harder to hear and detect. Investigating the inter-dependency relations of these measures is therefore essential for reasonable leakage reduction modelling and planning.
Water utilities should monitor their nonrevenue water (NRW) levels properly to manage water losses and sustain water services. However, monitoring NRW is problematic in an intermittent water supply regime. This is because more supplied water to users imposes higher volumes of NRW, and supplying significantly less water results in an unmet water demand but interestingly less NRW. This study investigates the influence of the amount of water supplied to a distribution system on the reported level of NRW. The volume and indicators of NRW all vary with variations in the system input volume (SIV). This is even more critical for monitoring NRW for systems shifting from intermittent to continuous supply. To enable meaningful monitoring, the NRW volume should be normalised. Addressing that, this research proposes two normalisation approaches: regression analysis and average supply time adjustment. Analysis of the NRW performance indicators showed that regression analysis enables the monitoring of NRW and tracking its progression in an individual system only, but not for a comparison with other systems. For comparing (or benchmarking) a water system to other systems with different supply patterns, the average supply time adjustment should be used. However, this approach presents significant uncertainties when the average supply time is less than eight hours per day.
Several software tools are available that can assess the performance of nonrevenue water (NRW) in water distribution networks and plan for reduction measures. Of the 21 tools that have been reported in the literature, 12 are freely available. The creation of these many tools and different versions of each individual tool indicates the promising future of NRW software development. This review comprises 12 freely available tools for water balance establishment, NRW performance assessment, and NRW reduction planning. Most of the tools have been developed to establish standard annual water balances and recommended performance indicators (PIs) for the entire network. Some tools have been developed to intervene and reduce the leakage in a district metered area. Key features increasingly being included in NRW software include uncertainty analysis, recognition of supply intermittency, and accommodation of a guidance matrix and benchmarks. Leakage assessment is fully recognized, and leakage reduction analyses are increasingly growing in the software tools. However, much less attention has been paid to assessing and options for reducing apparent losses. Although a comprehensive NRW management tool for monitoring, planning, and intervention is not currently available, developing a comprehensive tool is worthwhile, in the form of one package or a kit of smaller tools. Toward this goal, the article provides insights and recommendations addressing topics of intermittency, normalization, multi‐method assessment, planning for the reduction of apparent and real losses, and estimation of the economic level of water loss.This article is categorized under: Engineering Water > Planning Water Engineering Water > Methods
1 May 2018 in Journal of Water Resources Planning and Management
This paper presents a practical method for estimating the volume of apparent losses in water supply systems, particularly in a developing country context, so that real losses can be calculated from the volume of nonrevenue water (NRW). The method employs the fact that almost all apparent losses reach wastewater treatment plants (WWTPs). The volume of apparent losses can be estimated through establishing a water and wastewater balance using routine measurements of WWTP inflow and routine data of billed consumption. The water and wastewater balance was applied in the water supply system of Sana’a, Yemen, so NRW components were estimated. Sensitivity and uncertainty analyses show that all sources of the errors are small apart from the level of accuracy of measuring the WWTP inflow, and this accuracy can be practically improved. Other parameters and variables are relatively insensitive. The paper discusses the advantages and limitations of the suggested alternative method compared with the other NRW assessment methods.
1 December 2020 in Resources, Conservation and Recycling