Existing force-measuring devices lack versatility in studying the dynamic coupling process between the seedling-picking device and the plug seedling pot during automatic transplanting. This research developed a universal force-measuring device featuring a centrally symmetrical clamping needle layout and a simultaneous insertion and clamping mechanism. The force-measuring device enables the flexible adjustment of the number of clamping needles (2/3/4 needles) via a modular structure. It can also modify the insertion depth and angle of the clamping needles to accommodate three specifications of plug seedlings, namely 50-hole, 72-hole, and 128-hole plug seedlings. A real-time monitoring system with dual pull-pressure sensors is integrated to precisely acquire the dynamic response curves of the clamping force (FJ) and the disengaging force (FN) of the plug seedling pot during the seedling-picking process. Taking water spinach plug seedlings as the research object and combining with EDEM-RecurDyn coupling simulation, the interaction mechanism between the clamping needle and the plug seedling pot was elucidated. The performance of the force-measuring device was verified through systematic force-measuring experiments. The main research findings are as follows: The force-measuring device designed in this study can successfully obtain the mechanical characteristic curve of the relevant seedling plug pot throughout the automatic seedling-picking process. The simulation results show high consistency with the experimental results, indicating that the force-measuring device can effectively reveal the dynamic coupling process between the seedling-picking device and the plug seedling pot. The verification experiment demonstrates that the force-measuring device can effectively quantify the mechanical properties of the of plug seedling pots under different plug seedlings specifications and different clamping needles configurations. Reducing the hole size and increasing the number of clamping needles can effectively decrease the peak value of the disengaging force (FNmax). The peak clamping force (FJmax) is approximately inversely proportional to the needle number, with the four-needle layout providing the most uniform force distribution. The force-measuring device developed in this study is functional, applicable, and versatile, offering a general force-measuring tool and a theoretical foundation for optimal seedling-picking device design.
Correct arch-back orientation is essential in ridge-based strawberry transplanting. Improper orientation can increase soil contact and soil-borne disease risk, leading to yield loss and reduced harvest efficiency. In current practice, arch-back orientation of bare-root seedlings is still mainly judged and corrected manually, which is labor-intensive and not always accurate under field conditions. Although plug seedlings are easier for mechanized transplanting, they are about three times more expensive than bare-root seedlings. Therefore, bare-root seedlings remain widely used for cost-effective production. However, accurate real-time orientation perception for bare-root seedlings is still challenging because stems are thin, morphology varies widely, and leaves often occlude key curvature cues. To address this gap, we propose a lightweight machine-vision method for bare-root strawberry seedlings that detects three characteristic keypoints on the new stem. The three-keypoint design is inspired by farmers’ practical judgement: farmers often determine arch-back direction by observing the stem and using manual touch to sense curvature changes. Similarly, three keypoints provide a simple geometric representation of curvature trend, enabling real-time estimation of both arch-back direction and bending angle. Physical tests on 100 bare-root seedlings achieved a 93% agronomically compliant orientation rate, with an MAE of 5.74° and an RMSE of 7.44° for bending-angle estimation. For edge deployment, the optimized model achieved real-time performance on an embedded GPU platform, reaching 152.51 FPS (FP16) and 154.26 FPS (INT8). Overall, the proposed method provides a practical perception module that can be integrated into strawberry transplanting machines to support cost-effective, orientation-aware mechanized transplanting.
The automated transplanting of bare-root strawberry seedlings faces challenges, including a high reliance on manual feeding and a lack of adaptable equipment. Moreover, existing picking mechanisms are typically limited to plug seedlings rather than multi-stem crops. To overcome these limitations, this study proposes an automatic seedling picking and feeding system synergizing an intermittent conveying device and a manipulator. First, the physical and mechanical properties of bare-root strawberry seedlings were measured. Through radial stem compression tests, a non-destructive clamping safety threshold bounded by a bio-yield point of 28 N was determined. Secondly, an intermittent conveying device based on variable-span V-shaped supports was designed. Furthermore, based on the clamping safety threshold and spatial kinematic modeling, a seedling picking end-effector was developed. This end-effector adopts a “gather first, clamp later” operation strategy to guarantee grasping accuracy and ensure reliability by preventing seedling detachment during transportation. Finally, a system test bench was built to conduct a three-factor, three-level orthogonal experiment to investigate the effects of seedling picking frequency, gripping position, and clamping gap on operation quality. At a seedling pick-up frequency of 20 plants/min, gripping position of 25 mm, and gripping gap of 5 mm, the system reached 98% success rate in picking and feeding, validating its stability and providing core equipment and theoretical support for fully automatic strawberry transplanters.
The absence of industrially viable, fully automated transplanting systems for grafted melon-watermelon tray plug transplants stems primarily from intrinsic biomechanical constraints—namely hypocotyl brittleness, suboptimal stem erectness, and excessive plug volume—that collectively hinder reliable, non-traumatic automated manipulation. To overcome this bottleneck in mechanical automated transplanting, we propose a theory-informed and empirically validated framework for designing, optimizing, and implementing a pneumatically actuated, row-wise pick-and-place system. Its two-finger, four-needle end-effector employs sequential substrate penetration followed by controlled radial constraint. First, geometric metrology and quasi-static testing determined a mean tray detachment force of 2.99 ± 0.51 N (n = 30); a nonlinear viscoelastic model of peat-vermiculite compression enabled physics-guided parametrization of kinematic and force-control profiles. Second, EDEM-RecurDyn co-simulation integrated with a Box–Behnken design (three velocities × three levels) supported global multi-objective optimization. Performance was quantified via microstructural integrity (bond breakage density) and macrostructural coherence (substrate mass retention). Damage evolution was mapped across the oblique insertion-parallel clamping-vertical extraction sequence. Pareto-optimal settings were: insertion = 400 mm/s, holding = 100 mm/s, lifting = 300 mm/s. Third, a prototype using medical-grade stainless-steel needles (Φ = 3 mm) and a 50 mm-stroke pneumatic cylinder achieved a 96.33 ± 1.53% success rate, 2.33 ± 1.53% seedling injury rate, and 0.67 ± 0.58% plug pot failure rate (n = 300) under standardized conditions. This work provides a theoretical basis for the design and optimization of automated, low-loss transplanting equipment for grafted melon-watermelon tray pot seedlings.