Electronic skin is an important means through which robots can obtain external information. A novel flexible tactile sensor capable of simultaneously detecting the contact position and force was proposed in this paper. The tactile sensor had a three-layer structure. The upper layer was a specially designed conductive film based on indium-tin oxide polyethylene terephthalate (ITO-PET), which could be used for detecting contact position. The intermediate layer was a piezoresistive film used as the force-sensitive element. The lower layer was made of fully conductive material such as aluminum foil and was used only for signal output. In order to solve the inconsistencies and nonlinearity of the piezoresistive properties for large areas, a Radial Basis Function (RBF) neural network was used. This includes input, hidden, and output layers. The input layer has three nodes representing position coordinates, X, Y, and resistor, R. The output layer has one node representing force, F. A sensor sample was fabricated and experiments of contact position and force detection were performed on the sample. The results showed that the principal function of the tactile sensor was feasible. The sensor sample exhibited good consistency and linearity. The tactile sensor has only five lead wires and can provide the information support necessary for safe human—computer interactions.
24 February 2020 in Advanced Materials Technologies
In order to obtain external information and ensure the security of human–computer interaction, a double sensitive layer structured tactile sensor was proposed in this paper. Based on the EIT (Electrical Impedance Tomography) method, the sensor converts the information from external collisions or contact into local conductivity changes, and realizes the detection of one or more contact points. These changes can be processed into an image containing positional and force information. The experiments were conducted on the actual sensor sample. The OpenCV toolkit was used to process the positional information of contact points. The distributional regularities of errors in positional detection were analyzed, and the accuracy of the positional detection was evaluated. The effectiveness, sensitivity, and contact area of the force detection were analyzed based on the result of the EIT calculations. Furthermore, multi-object tests of pressure were conducted. The results of the experiment indicated that the proposed sensor performed well in detecting the position and force of contact. It is suitable for human–robot interaction.
Based on the current situation of high precision and comparatively low APA (absolute positioning accuracy) in industrial robots, a calibration method to enhance the APA of industrial robots is proposed. In view of the "hidden" characteristics of the RBCS (robot base coordinate system) and the FCS (flange coordinate system) in the measurement process, a comparatively general measurement and calibration method of the RBCS and the FCS is proposed, and the source of the robot terminal position error is classified into three aspects: positioning error of industrial RBCS, kinematics parameter error of manipulator, and positioning error of industrial robot end FCS. The robot position error model is established, and the relation equation of the robot end position error and the industrial robot model parameter error is deduced. By solving the equation, the parameter error identification and the supplementary results are obtained, and the method of compensating the error by using the robot joint angle is realized. The Leica laser tracker is used to verify the calibration method on ABB IRB120 industrial robot. The experimental results show that the calibration method can effectively enhance the APA of the robot.
Efficiency can be improved through the cooperation of a dual-robot during assembly. However, how to effectively plan a simple and smooth path in a dynamic environment is a prominent problem in the process of dual-robot cooperative assembly. In this paper, a method based on RRT-Connect algorithm for trajectory planning and post-processing for trajectory optimization is proposed. This method takes full advantage of the excellent solution ability of RRT-Connect algorithm in the complex environment so as to obtain the initial path successfully. Through post-processing, the problem of RRT-Connect non-convergence to target is optimized. We use two 6-DOF industrial robots to build an experimental platform and design a dual-robot cooperative assembly system. According to the given task, the system can generate the original collision-free path based on RRT-Connect algorithm. Then the original path is simplified by Floyd algorithm and smoothed by multi-segment Bezier curve. Finally, the time parameter is sequenced for all the path points based on the iterative method, and the effective trajectory is obtained. The experimental results show that the algorithm proposed in this paper can effectively plan and optimize the trajectory of dual-robot. Compared to other methods, this approach has a higher success rate and less planning time.