Developing an advanced monitoring system for strain measurements on structural components represents a significant task, both in relation to testing of in-service parameters and early identification of structural problems. This paper aims to provide a state-of-the-art review on strain detection techniques in composite structures. The review represented a good opportunity for direct comparison of different novel strain measurement techniques. Fibers Bragg grating (FBG) was discussed as well as non-contact techniques together with semiconductor strain gauges (SGs), specifically infrared (IR) thermography and the digital image correlation (DIC) applied in order to detect strain and failure growth during the tests. The challenges of the research community are finally discussed by opening the current scenario to new objectives and industrial applications.

The continuous pursuit of reducing weight and optimizing manufacturing processes is increasingly demanded in transportation vehicles, particularly in the aerospace field. In this context, additive manufacturing (AM) represents a well-known technique suitable for re-engineering traditional systems, minimizing the product’s weight/volume and print time. The present research activity allowed for the exploration of the feasibility to replicate a conventional hydraulic manifold already certified for defence application with a lightweight and more compact issue through typical stringent aeronautical qualification steps. Computational modelling with lab test efforts made it possible to assess the compliance of the device with airworthiness certification requirements, giving a special focus to the fulfilment of structural requirements. In particular, the fatigue life characterization is still a crucial point to be well investigated in aeronautical components dfAM (designed for additive manufacturing) to demonstrate the maturity of the technology in the certification scenario. The new AM-driven design offers a more than 40 per cent weight reduction.

Different industrial mixing methods and some of their combinations ((1) ultrasound; (2) mechanical stirring; (3) by roller machine; (4) by gears machine; and (5) ultrasound radiation + high stirring) were investigated for incorporating multi-walled carbon nanotubes (MWCNT) into a resin based on an aeronautical epoxy precursor cured with diaminodiphenylsulfone (DDS). The effect of different parameters, ultrasound intensity, number of cycles, type of blade, and gear speed on the nanofiller dispersion were analyzed. The inclusion of the nanofiller in the resin causes a drastic increase in the viscosity, preventing the homogenization of the resin and a drastic increase in temperature in the zones closest to the ultrasound probe. To face these challenges, the application of high-speed agitation simultaneously with the application of ultrasonic radiation was applied. This allowed, on the one hand, a homogeneous dispersion, and on the other hand, an improvement of the dissipation of heat generated by ultrasonic radiation. The most efficient method was a combination of ultrasound radiation assisted by a high stirring method with the calendar, which was used for the preparation of a carbon fiber reinforced panel (CFRP). The manufactured panel was subjected to dynamic and vibroacoustic tests in order to characterize structural damping and sound transmission loss properties. Under both points of view, the new formulation demonstrated an improved efficiency with reference to a standard CFRP equivalent panel. In fact, for this panel, the estimated damping value was well above the average of the typical values representative of the carbon fiber laminates (generally less than 1%), and also a good vibroacoustic performance was detected as the nanotube based panel exhibited a higher sound transmission loss (STL) at low frequencies, in correspondence with the normal mode participation region. The manufactured panel was also characterized in terms of fire performance using a cone calorimeter and the results were compared to those obtained using a commercially available monocomponent RTM6 (Hexcel composites) epoxy aeronautic resin with the same process and the same fabric and lamination. Compared to the traditional RTM6 resin, the panel with the epoxy nanofilled resin exhibits a significant improvement in fire resistance properties both in terms of a delay in the ignition time and in terms of an increase in the thermal resistance of the material. Compared to the traditional panel, made in the same conditions as the RTM6 resin, the time of ignition of the nanotube-based panel increased by 31 seconds while for the same panel, the heat release rate at peak, the average heat release rate, and the total heat release decreased by 21.4%, 48.5%, and 15%, respectively. The improvement of the fire performance was attributed to the formation of a non-intumescent char due to the simultaneous presence of GPOSS and carbon nanotubes.

The adoption of multifunctional flame-resistant composites is becoming increasingly attractive for many components of aircrafts and competition cars. Compared to conventional alloy solutions, the reduced weight and corrosion resistance are only a couple of the relevant advantages they can offer. In this paper, a carbon fiber reinforced panel (CFRP) was impregnated with an epoxy resin enhanced using a combination of 0.5 wt% of carbon nanotubes (CNTs) and 5 wt% of Glycidyl-Polyhedral Oligomeric Silsesquioxanes (GPOSS). This formulation, which is peculiar to resins with increased electrical conductivity and flame-resistance properties, has been employed for manufacturing a carbon fiber reinforced panel (CFRP) composed of eight plies through a liquid infusion technique. Vibro-acoustic tests have been performed on the panel for the characterization of the damping performance, as well the transmission loss properties related to micro-handling treatments. The spectral excitation has been provided by an acoustic source simulating the aerodynamic pressure load agent on the structure. The incorporation of multi-walled carbon nanotubes MWCNTs in the epoxy matrix determines a non-trivial improvement in the dynamic performance of the laminate. An increased damping loss factor with reference to standard CFRP laminate and also an improvement of the sound insulation parameter was found for the specific test article.

Aircraft industry is by now deeply involved in technological breakthroughs bringing innovative frameworks, in which the morphing systems constitute the most promising scenario. These systems are taking a remarkable role among the unconventional solutions for the improvement of performance in the operating conditions. The application of morphing devices involves a combination among structural and aerodynamic analyses, actuation requirements, weight assessment and flight control performance. The research project CRIAQ-MDO505, Canadian–European cooperation project on smart technologies, has investigated morphing structures potential through the design and the manufacturing of a variable camber aileron tailored to CS-25 category aircraft applications. This paper is especially focused on the most considerable results able to validate the conceptual design: functionality, ground vibration and wind tunnel tests outcomes have been discussed. The ailerons typically constitute crucial elements for the aerodynamic forces equilibrium of the wing. Therefore, compared to the traditional architectures, the need of studying the dynamic performance and the following aeroelastic impact is, in the specific case of servo-actuated variable-shaped systems, higher. Relying upon the experimental evidence within the present research, the issue appeared concerns the critical importance of considering the dynamic modelling of the actuators in the design phase of a smart device. The higher number of actuators and mechanisms involved makes de facto the morphing structure much more complex. In this context, the action of the actuators has been modelled within the numerical model of the aileron: the comparison between the modal characteristics of numerical predictions and testing activities has shown a high level of correlation. Moreover, the compliance of the device with the design morphing shapes has been proved by wind tunnel test. The outcomes are expected to be key insights for future designers to better comprehend the dynamic response of a morphing aileron, primary knowledge for flutter and failure analyses.

Nature has many striking examples of adaptive structures: the emulation of birds’ flight is the true challenge of a morphing wing. The integration of increasingly innovative technologies, such as reliable kinematic mechanisms, embedded servo-actuation and smart materials systems, enables us to realize new structural systems fully compatible with the more and more stringent airworthiness requirements. In this paper, the authors describe the characterization of an adaptive structure, representative of a wing trailing edge, consisting of a finger-like rib mechanism with a highly deformable skin, which comprises both soft and stiff parts. The morphing skin is able to follow the trailing edge movement under repeated cycles, while being stiff enough to preserve its shape under aerodynamic loads and adequately pliable to minimize the actuation power required for morphing. In order to properly characterize the system, a mock-up was manufactured whose structural properties, in particular the ability to carry out loads, were also guaranteed by the elastic skin. A numerical sensitivity analysis with respect to the mechanical properties of the multi-segment skin was performed to investigate their influence on the modal response of the whole system. Experimental dynamic tests were then carried out and the obtained results were critically analysed to prove the adequacy of the adopted design approaches as well as to quantify the dissipative (high-damping) effects induced by the rubber foam on the dynamic response of the morphing architecture.