The aim of this work is to model Schottky diodes series rectifier for application in Radio Frequency Energy Harvesting (RFEH). A time-domain approach is proposed, including the reverse conduction of the diodes, which can significantly degrade the Power Conversion Efficiency (PCE) as the diode input power increases. The influences of the load, temperature, matching network and choke inductor have also been considered. The representativeness of the model was validated by means of computer simulations and experimental results.
3 February 2021 in IEEE/CAA Journal of Automatica Sinica
Wind energy can be considered a push-driver factor in the integration of renewable energy sources within the concept of smart grids. For its full deployment, it requires a modern telecommunication infrastructure for transmitting control signals around the distributed generation, in which, the wireless communication standards stand out for employing modern digital modulation and coding schemes for error correction, in order to guarantee the power plant operability. In some developing countries, such as Brazil, the high penetration of commercial mobile wireless standards GPRS and EGPRS (based on GSM technology) have captivated the interests of the energy sector, and they now seek to perform remote monitoring and control operations. In this context, this article presents a comparative performance analysis of a wireless control system for a wind SRG, when a GPRS or EGPRS data service is employed. The system performance is analyzed by co-simulations, including the wind generator dynamics and the wireless channel effects. The satisfactory results endorse the viability and robustness of the proposed system.
This article aims to contribute for the improvement of low-power Radio Frequency Energy Harvesting (RFEH) designs based on Schottky Barrier Diode (SBD) rectifiers, presenting a study of the relationship between RF-DC Power Conversion Efficiency (PCE) and circuit temperature, which is directly related to the non-linear behavior of the metal-semiconductor junction of SBDs. For this purpose, SPICE diode models were revisited, evaluating the temperature dependence and its effects on forward and reverse conduction modes. The SBDs SMS7621 and SMS7630 temperature dependent characteristics are evaluated according the proposal, and their use is explored through analytical modeling and simulation analyzes of an RFEH system for temperatures ranging from 240 to 360 K. Hence, after an initial formulation of the optimum operation in terms of PCE, two series RF rectifiers are designed based on the mentioned diodes, aiming at an efficient operation over different temperature ranges according to each component optimum PCE, at 300 K for the SMS7630 and over 340 K for the SMS7621. For the SMS7630 prototype, the maximum measured PCE is 25.33% around 293 K, but decreases to 3.65% around 353 K, and for the SMS7621 the measured PCE goes from 11.56% to 16.34% in the same temperature range, considering -20 dBm as Input Power (P in ) due to the low-power RFEH premise. The results leads to a higher PCE stability for the SMS7621 through the whole analyzed range, despite the overall PCE that is limited by the matching network losses intrinsic to the design.
22 November 2013 in Journal of Control, Automation and Electrical Systems
This paper presents a patch antenna array topology for Simultaneous Wireless Information and Power Transfer (SWIPT) applications. The resulting Double Patch Antenna Array (DPA) is composed of two patch antennas operating at different frequencies and fabricated on a unique substrate. One of the patches operates at the 1.8 GHz mobile communication band and is used for wireless communication, while the other one operates at the 2.4 GHz Industrial, Scientific, and Medical (ISM) band, and is used for Radio Frequency Energy Harvesting (RFEH). The analyzes and measurements carried out have shown that the adopted topology has satisfactory performance for communication, with a gain of 1.5 dBi, and for out-of-band energy harvesting, with a Vout of 160 mV at 2.45 GHz. These results indicate this approach as a promising strategy for low-power wireless applications.
23 March 2016 in Journal of Control, Automation and Electrical Systems