Fluid transport through a nanopore in a membrane was investigated by using a novel molecular dynamics approach proposed in this study. The advantages of this method, relative to dual-control-volume grand-canonical molecular dynamics method, are that it eliminates disruptions to the system dynamics that are normally created by inserting or deleting particles from control volumes, and that it functions well for dense systems due to the number of particles being fixed in the system. Using the proposed method, we examined liquid argon transport through a nanopore by performing nonequilibrium molecular dynamics (NEMD) simulations under different back pressures. Validation of the code was performed by comparing simulation results to published experimental data obtained under equilibrium conditions. NEMD results show that constant pressure difference across the membrane was readily achieved.

The effect of cut-off distance used in molecular dynamics (MD) simulations on fluid properties was studied systematically in both canonical (NVT) and isothermal–isobaric (NPT) ensembles. Results show that the cut-off distance in the NVT ensemble plays little role in determining the equilibrium structure of fluid if the ensemble has a high density. However, pressures calculated in the same NVT ensembles strongly depend on the cut-off distance used. In the NPT ensemble, cut-off distance plays a key role in determining fluid equilibrium structure, density and self-diffusion coefficient. The characteristic of the radial distribution function of fluid in NPT ensembles depending on the cut-off distance used in MD simulations means that the WCA theory (a perturbation theory developed by Weeks, Chandler and Andersen) is not suitable for NPT ensembles because the assumption (the effect of the attractive force in determining the liquid structure is negligible) used in the WCA theory is not valid. The dependence of fluid properties on the cut-off distance also indicates that using the WCA potential (the repulsive part of the intermolecular potential proposed in the WCA theory) to calculate fluid transport in heterogeneous systems could lead to significant errors or incorrect results.

The current production of wood composites relies mostly on formaldehyde-based adhesives such as urea formaldehyde (UF) and phenol formaldehyde (PF) resins. As these resins are produced from non-renewable resources, and there are some ongoing issues with possible health hazard due to formaldehyde emission from such products, the purpose of this research was to develop a formaldehyde-free plywood adhesive utilizing waste protein as a renewable feedstock. The feedstock for this work was specified risk material (SRM), which is currently being disposed of either by incineration or by landfilling. In this report, we describe a technology for utilization of SRM for the development of an environmentally friendly plywood adhesive. SRM was thermally hydrolyzed using a Canadian government-approved protocol, and the peptides were recovered from the hydrolyzate. The recovered peptides were chemically crosslinked with polyamidoamine-epichlorohydrin (PAE) resin to develop an adhesive system for bonding of plywood specimens. The effects of crosslinking time, peptides/crosslinking agent ratio, and temperature of hot pressing of plywood specimens on the strength of formulated adhesives were investigated. Formulations containing as much as 78% (wt/wt) peptides met the ASTM (American Society for Testing and Materials) specifications of minimum dry and soaked shear strength requirement for UF resin type adhesives. Under the optimum conditions tested, the peptides–PAE resin-based formulations resulted in plywood specimens having comparable dry as well as soaked shear strength to that of commercial PF resin.

Covalent linkages between lignin and the surrounding carbohydrate network, often referred to as lignin–carbohydrate complexes (LCCs), have been proposed to affect the organization of the biomass microstructure and directly correlate with the recalcitrant nature of biomass. However, the existence and frequency of these LCC linkages remain controversial and largely unknown, primarily due to the harsh experimental techniques available to characterize them. During the predominant lignin polymerization pathway a reactive intermediate is formed. Though this intermediate can covalently bind to the surrounding cellulose/hemicellulose matrix, it has been traditionally assumed to react exclusively with water, leading to purely physical interactions between lignin and cellulose/hemicellulose in the cell wall. This work, for the first time, provides direct evidence of the molecular mechanism of the formation of benzyl ether and benzyl ester LCC linkages via the speculated lignin polymerization pathway. The formation of these LCC linkages showed thermodynamic favorability, while remaining kinetically facile, compared to the previously assumed mechanism of the lignin intermediate reacting with water. The present work suggests that the surrounding carbohydrate matrix could play a role in the organization of lignin deposition and these covalent linkages could be a key factor in biomass recalcitrance.