In order to overcome existing solid catalysts' disadvantages of low stability and activity, urea-derived graphitic carbon nitrides (u-g-C3N4) with higher stabilities and more active centers were prepared under different temperatures (550–450 °C). With a decrease in preparation temperature from 550 °C to 480 °C, a u-g-C3N4 of lower crystallinity with a smaller polymerization degree was obtained and found to have a higher catalytic activity for CO2 conversion into propylene carbonate. The higher activity of the u-g-C3N4 caused by decreasing the temperature might be ascribed to the lower crystallinity and polymerization degree, which led to more edge defects, wherein the incompletely-coordinated nitrogen atoms served as the main active sites in the cycloaddition reaction. Among all the prepared catalysts, that prepared at 480 °C (u-g-C3N4-480) showed the highest catalytic activity for CO2 conversion and exhibited great suitability for other epoxide substrates.
By one-step assembly with mesoporous silica, different amounts of EmimBr were dispersed and confined for boosting CO2 conversion into cyclic carbonates.
Boron-doped melamine-derived carbon nitrides were tailored with BmimBF 4 as a soft template and boron source for CO 2 conversion into cyclic carbonates.
A series of hydroxyl-functionalized poly(ionic liquids) (PILs) were synthesized and employed as catalysts for the synthesis of cyclic carbonates from CO2 and epoxides without the use of any co-catalyst or organic solvent. It was demonstrated that hydroxyl and bromide anion had an excellent synergetic effect on promoting the reaction, and the PILs catalysed co-polymerization of 1-vinyl-3-carboxyethylimidazolium bromide with the cross-linker divinylbenzene (DVB) was observed to be the most efficient, with nearly a 99% yield of propylene carbonate and 100% selectivity. The effects of temperature, pressure and reaction time on the reaction were also investigated. Moreover, the catalysts can be easily recovered and reused more than five times with only a slight decline in catalytic activity. This process carries huge industrial applications due to the reactions high efficiency and the ease of catalyst separation and recycling, which could be profitably applied to the development of fixed-bed continuous flow reactors.
This review presents the synergistic effect in the catalytic system of ionic liquids (ILs) for the synthesis of cyclic carbonate from carbon dioxide and epoxide. The emphasis of this review is on three aspects: the catalytic system of metal-based ionic liquids, the catalytic system of hydrogen bond-promoted ionic liquids and supported ionic liquids. Metal and ionic liquids show a synergistic effect on the cycloaddition reactions of epoxides. The cations and anions of ionic liquids show a synergistic effect on the cycloaddition reactions. The functional groups in cations or supports combined with the anions have a synergistic effect on the cycloaddition reactions. Synergistic catalytic effects of ILs play an important role of promoting the cycloaddition reactions of epoxides. The design of catalytic system of ionic liquids will be possible if the synergistic effect on a molecular level is understood.
In this work, ZnBr2-based choline chloride (CH) was first investigated to catalyze the synthesis of cyclic carbonates from CO2 and epoxides under solventless conditions. It was demonstrated that ZnBr2-based CH was very efficient and selective. Under the optimum reaction conditions, 99% yield of propylene carbonate was achieved. The catalyst can be reused five times without loss of catalytic activity. It was proved to be very active in a variety of terminal epoxides with CO2. In addition, a synergistic catalytic mechanism by Zn2+ and -OH was proposed.