Nowadays, environmental problems are drawing the attention of governments and international organisations, which are therefore encouraging the transition to green industrial processes and approaches. In this context, chemists can help indicate a suitable direction. Beside the efforts focused on greening synthetic approaches, currently also analytical techniques and separations are under observation, especially those employing large volumes of organic solvents, such as reversed-phase liquid chromatography (RPLC). Acetonitrile has always been considered the best performing organic modifier for RPLC applications, due to its chemical features (complete miscibility in water, UV transparency, low viscosity etc); nevertheless, it suffers of severe shortcomings, and most importantly, it does not fully comply with Environmental, Health and Safety (EHS) requirements. For these reasons, alternative greener solvents are being investigated, especially easily available alcohols. In this work, chromatographic performance of the most common solvents used in reversed-phase chromatography, i.e., acetonitrile, ethanol and isopropanol, have been compared to a scarcely used solvent, dimethyl carbonate (DMC). The analytes of interest were two small molecules, caffeine and paracetamol, whose kinetics and retention behaviour obtained with the four solvents have been compared, and all contributions to band broadening have been assessed. Results about kinetic performance are very promising, indicating that a small amount (7 % v/v) of DMC is able to produce the same efficiency as a 2.5-times larger ACN volume (18 % v/v), and larger efficiency than alcohols. This paper reports, for the first time, fundamental studies concerning the mass transfer phenomena when DMC is used as an organic solvent in RPLC, and, together with the companion paper, represents the results of a research whose final aim was to discover whether DMC is suitable for chromatographic applications both in linear and preparative conditions.

Preparative liquid chromatography in reversed phase conditions (RPLC) is the most common approach adopted in the downstream processing for the purification of therapeutic peptides at industrial level. Due to the strict requirements on the quality imposed by the Regulatory Agencies, routinary methods based on the use of aqueous buffers and acetonitrile (ACN) as organic modifier are commonly used, where ACN is practically the only available choice for the purification of peptide derivatives. However, ACN is known to suffers of many shortcomings, such as drastic shortage in the market, high costs and, most importantly, it shows unwanted toxicity for human health and environment, which led it among the less environmentally friendly ones. For this reason, the selection of a suitable alternative becomes crucial for the sustainable downstream processing of peptides and biopharmaceuticals in general. In this paper, a promising green solvent, namely dimethyl carbonate (DMC) has been used for the separation of a peptide not only in linear conditions but also for its purification through non-linear overloaded chromatography. The performance of the process has been compared to that achievable with the common method where ACN is used as organic modifier and to that obtained with two additional solvents (namely ethanol and isopropanol), already used as greener alternatives to ACN. This proof-of-concept study showed that, thanks to its higher elution strength, DMC can be considered a green alternative to ACN, since it allows to reduce method duration while reaching good purities and recoveries. Indeed, at a target purity fixed to 98.5 %, DMC led to the best productivity with respect to all the other solvents tested, confirming its suitability as a sustainable alternative to ACN for the purification of complex biopharmaceutical products.

Indole-decorated glycine derivatives are prepared through an environmentally benign cross-dehydrogenative coupling between N-aryl glycine analogues and indoles (yield of ≤81%). Merging heterogeneous organocatalysis and photocatalysis, C-H functionalization has been achieved by selective C-2 oxidation of N-aryl glycines to afford the electrophilic imine followed by Friedel-Crafts alkylation with indole. The sustainability of the process has been taken into account in the reaction design through the implementation of a metal-free recyclable heterogeneous photocatalyst and a green reaction medium. Scale-up of the benchmark reaction (gram scale, yield of 69%) and recycling experiments (over seven runs without a loss of efficiency) have been performed to prove the robustness of the protocol. Finally, mechanistic studies were conducted employing electron paramagnetic resonance spectroscopy to unveil the roles of the photocatalyst and oxygen in the formation of odd-electron species.

Due to its effectiveness, ibuprofen is one of the most popular anti-inflammatory drugs worldwide. However, the poor water solubility of this active ingredient severely limits its spectrum of pharmaceutical formulations (and often results in severe adverse effects due to high administered doses). To overcome these limitations, in this work, we enzymatically synthesized more hydrophilic derivatives of ibuprofen through its covalent attachment to two biobased polyalcohols: erythritol and glycerol. Herein, we report the optimized reaction conditions to produce an IBU–erythritol ester (82% ± 4% of conversion) by using Candida antarctica lipase B (CalB). Furthermore, we also report the enantioselective solventless esterification of (S)-ibuprofen with glycerol (83% ± 5% of conversion), exploiting immobilized Rhizomucor miehei lipase as a biocatalyst. The full NMR characterizations of the prodrug esters were performed via ¹H, ¹³C-NMR, DEPT, COSY, HSQC, and HMBC-NMR. The approach reported in this work can be extended to a large variety of poorly water-soluble active pharmaceutical ingredients (APIs).

Nor(pseudo)ephedrines (N(P)Es), vicinal amino alcohols possessing sympathomimetic biological activity, constitute valuable intermediates and chiral building blocks for the organic synthesis of several active pharmaceutical ingredients (APIs). Due to the presence of two chiral centers, their conventional chemical asymmetric syntheses often involve long, multi‐step procedures, frequently with the aid of expensive and harmful metal catalysts, making it challenging to achieve high yields and optical purities overall. A two‐steps biocatalytic synthetic sequence for the preparation of (1S)‐N(P)E analogues was therefore designed and carried out, consisting of a benzoin‐type condensation catalysed by the (S)‐selective acetoin:dichlorophenolindophenol oxidoreductase (Ao:DCPIP OR) and a transamination mediated by either an (S)‐ or (R)‐selective amine transaminase (ATA). A multistep chemical synthesis of racemic N(P)Es was also optimised in order to obtain reference material for evaluating the performance of the biocatalysed reactions. The novel bi‐enzymatic synthesis provided the desired products with acceptable yields and good diastereo‐ and enantiomeric excesses, thereby paving the way for greener production of these important building blocks.

Thiamine diphosphate (ThDP)‐dependent enzymes are well known biocatalysts for CC bond–forming reactions. While this enzyme class is mainly investigated for the formation of acyloins of secondary alcohols, recent studies have expanded its scope to utilize ketones as electrophiles in asymmetric carboligation reactions for the formation of tertiary alcohols. Chiral tertiary alcohols are ubiquitous motifs in natural products and important building blocks for the synthesis of bioactive compounds. ThDP‐dependent enzymes are emerging as one of the most promising classes of biocatalysts for synthesizing a wide range of products due to the variety of possible substrate combinations, accessible starting materials, high enantioselectivity, and advantageous self‐regeneration of the catalytic ThDP cofactor. This review provides an overview of the ThDP‐dependent enzymes (e.g., decarboxylase, DC; transketolase, TK; α‐keto acid dehydrogenase 2, αKADH2) that form tertiary alcohols, focusing on the substrate scope and diversity of physiological functions. The available toolbox and the characterized reactions shall serve as a starting point for future studies. Inspired by nature, an even broader diversity of classes and substrate specificities is expected in this field.