Mudstone and shaly coarse sandstone samples of Jurassic units in northwestern China were collected to study the seepage mechanism of weakly cemented rock affected by underground mining operations. Samples were studied using seepage experiments under triaxial compression considering two processes: complete stress-strain and postpeak loading and unloading. The results show that permeability variations closely correspond to deviatoric stress-axial strain during the process of complete stress-strain. The initial permeability is 7 times its minimum, contrasting with lesser differentials of initial, peak, and residual permeability. The magnitude of permeability ranges from 10⁻¹⁷ to 10⁻¹⁹ m², representing a stable water-resisting property, and is 1 to 2 orders lower in mudstone than that in shaly coarse sandstone, indicating that the water-resisting property of the mudstone is much better than that of the shaly coarse sandstone. Permeability is negatively correlated with the confining pressure. In response to this pressure, the permeability change in mudstone is faster than that in shaly coarse sandstone during the process of postpeak loading and unloading. Weakly cemented rock has lower permeability according to the comparison with congeneric ordinary rocks. This distinction is more remarkable in terms of the initial permeability. Analyses based on scanning electron microscope (SEM) observations and mineral composition indicate that the samples are rich in clay minerals such as montmorillonite and kaolin, whose inherent properties of hydroexpansiveness and hydrosliming can be considered the dominant factors contributing to the seepage properties of weakly cemented rock with low permeability.

Aquiclude plays a critical role in the occurrence of mining-induced roof water inrush in underground coal mines. This paper proposes an assessment index for the evaluation of aquiclude stability and a threshold value of water inrush from the roof, based on a case study of roof water inrush accidents in Cuimu coal mine, China. The relation between roof water inrush and water level variation in the aquifer, and the characteristics of aquiclude deformation, were studied in this assessment. Using the developed assessment criteria, the likelihood of roof water inrush was categorized into different risk levels, which were followed by a proposal for roof water inrush control measures. The main findings of this study are: a) in Cuimu coal mine, the waterbody in the bed separation between the upper aquifer and the aquiclude directly causes the inrush, and inrush occurs after the water level declines in the aquifer; b) tension-induced horizontal strains of aquiclude can be regarded as the index to evaluate the stability of aquiclude affected by underground coal mining—roof water inrush occurs when the maximum horizontal strain reaches a threshold of 10mm/m—c) based on the critical mining height for aquiclude instability, and the different thicknesses of barrier layers, high-risk zones are identified and inrush controls are proposed.

The roof falling accident is a serious threat to the lives of miners in deep coal mining, especially when the coal mine is more than 1000 meters deep. In regard to the 5306 coalface in the Tangkou coal mine, Shandong, China, the depth of coal seam is 992.8 m and the stress concentration coefficient of the roadway surrounding rock is 3.33. This leads to a serious deformation of the roadway roof, thereby producing a high risk of the roof falling disaster. In this pursuit, based on the mechanical analysis of roadway roof subjected to a high abutment pressure, the mathematical expressions of the setting load and movable column length of supports were introduced. Furthermore, the stability control mechanism of the roadway roof was analyzed and the optimized support parameters of supports are provided. The results showed that the longtime effective support of the roadway roof required the strength and deformation coupling of supports and anchored surrounding rock. The support length of the belt roadway should be at least 57.7 m, with 0-30 m away from the coalface supported by hydraulic supports and 32-57.7 m supported by single props. In addition, the maximum setting load and movable column length of hydraulic supports were 21.67 MPa and 280.3 mm and 12.44 MPa and 177.1 mm for single props, respectively. By applying the optimized support parameters of supports to the belt roadway of the 5306 coalface, the effective control of the roadway roof and the disaster control of roof falling were realized.