Using concrete waste as aggregates in new concrete compositions brings numerous advantages. It helps in reducing the costs associated with managing demolition waste and contributes to the preservation of natural deposits and mountains by minimizing the demand for new quarries. However, when completely substituting natural aggregates (NA) with recycled concrete aggregates (RCA) in concrete, it directly affects the fundamental properties of the material, particularly its physical and mechanical characteristics. This is primarily due to the inferior qualities exhibited by RCAs in comparison to natural coarse aggregates, primarily stemming from their increased porosity and water absorption. In the experimental study conducted, the focus was on investigating the influence of substituting cement with crushed dune sand (CDS) at different replacement levels (5%, 10%, and 15%) on the mechanical and physical properties of self-compacting concrete (SCC) incorporating 100% RCA. The findings from this study indicated that the substitution of cement with CS resulted in improved mechanical and physical behavior of the self-compacting concrete containing 100% RCA, particularly when CS was present at 5% and 10% levels. Overall, the study suggests that incorporating CS as a partial substitute for cement in SCC containing 100% RCA can positively affect the properties of the concrete mixture, enhancing its mechanical and physical performance.
20 January 2023 in The Journal of Engineering and Exact Sciences
This paper aims to evaluate the mechanical behavior and durability of high-performance concrete reinforced with steel fibers recycled from waste car tires at 1% and 2% volume fractions and 2 cm and 3 cm lengths. Compressive and flexural strength tests were conducted on confined cubic and prismatic specimens at 28 days of age, with ultrasonic testing performed to confirm concrete properties non-destructively. Additionally, immersing specimens in 5% HCl and MgSO4 solutions to study their resistance in aggressive environments assessed the durability of the concrete. The findings indicated that the incorporation of steel tire fibers had a positive impact on the flexural and compressive strength of the material. Furthermore, a distinct correlation was evident between the ultrasonic pulse velocity and both the compressive and flexural strength. Additionally, the high-performance concrete exhibited resistance to chemical reactions in aggressive environments.
14 May 2024 in The Journal of Engineering and Exact Sciences
This study aims to examine the impact of utilizing coal bottom ash (CBA) sourced from an inactive power plant on the fresh and hardened properties of lightweight self-compacting concrete (LWSCC). To evaluate the workability of the LWSCC mixtures, slump flow, L-box, and sieve segregation tests were performed. The mechanical and physical properties were assessed through dry density, compressive strength and ultrasonic pulse velocity (UPV) tests. A total of five concrete mixes were developed: a control mix and four additional mixtures in which natural coarse aggregate was fully substituted with coal bottom ash aggregate (CCBA). Additionally, Portland cement was partially replaced with coal bottom ash powder (CBAP) at levels of 15%, 20%, and 25%. The results indicated that the use of CBA as a coarse aggregate enhanced the workability of LWSCC, though workability decreased as the proportion of CBAP increased. Nonetheless, the workability of all mixes remained compliant with the standards specified by the French Association of Civil Engineering (AFGC). Minimal variations in dry density and compressive strength were observed with the incorporation of CBA; however, these values remained within the acceptable limits for structural lightweight concrete. Furthermore, the UPV test demonstrated favorable durability for all LWSCC mixtures. Strong linear correlations were identified among the various measured properties, reinforcing the conclusion that CBA serves as an effective replacement for natural coarse aggregate. Moreover, the use of 15% CBAP as a partial substitute for Portland cement proved to be a feasible option for producing sustainable LWSCC.