Given the climate challenge, society is seeking low greenhouse gas emission energy sources. In jurisdictions such as Alberta, Canada where power is largely generated through the combustion of natural gas, geothermal offers a compelling option but it remains unclear as to its economic and technical viability. Here, we examine the potential for an enhanced geothermal system in the Basal Cambrian Sandstone Unit in Alberta, Canada. Prior to geothermal operation, hydraulic fracturing is conducted to enhance the permeability of the thermal reservoir. This lowers the pressure drop required for circulating fluids through the system. The results show that the open-loop enhanced geothermal system realizes an energy produced to energy invested ratio from 4 to 9 depending on different operating rate. The results also suggest that applying hydraulic fracturing can accelerate energy harvesting and energy efficiency over the early stages of the process but the greater the injection rate, the smaller is this benefit of hydraulic fracturing stimulation.
Offshore buried-hill reservoirs are potential targets for integrated CO2-enhanced oil recovery and geological storage. However, the early-stage response of clay-rich granitic gneiss under reservoir conditions remains poorly constrained. We conducted 7-day static experiments with an illite-rich mineral powder assemblage at 125 °C and 35 or 50 MPa using synthetic formation water. Complementary granitic gneiss discs were reacted at 50 MPa for surface observations. The powders were characterized by XRD, FTIR, and XPS and the discs by SEM–EDS. XRD indicated lower relative abundances of illite after reaction and more pronounced changes in several carbonate and clay phases at 50 MPa. FTIR showed the attenuation of structural O–H, carbonate, and aluminosilicate-related bands, while XPS indicated surface elemental redistribution. SEM–EDS revealed mineral-selective surface alteration and localized particle accumulation. Quartz appeared less reactive than clay minerals and calcite over the experimental duration. The particles may include redeposited fines or secondary products, but their phase identity remains unresolved. Together, the observations characterize early-stage mineralogical and surface responses relevant to evaluating CO2–rock interactions in clay-rich buried-hill reservoirs. Their consequences for injectivity and long-term storage require direct petrophysical and geomechanical evaluation.