We report the crystal structure and hole-transport mechanism in spiro-OMeTAD [2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9′-spirobifluorene], the dominant hole-transporting material in perovskite and solid-state dye-sensitized solar cells. Despite spiro-OMeTAD’s paramount role in such devices, its crystal structure was unknown because of highly disordered solution-processed films; the hole-transport pathways remained ill-defined and the charge carrier mobilities were low, posing a major bottleneck for advancing cell efficiencies. We devised an antisolvent crystallization strategy to grow single crystals of spiro-OMeTAD, which allowed us to experimentally elucidate its molecular packing and transport properties. Electronic structure calculations enabled us to map spiro-OMeTAD’s intermolecular charge-hopping pathways. Promisingly, single-crystal mobilities were found to exceed their thin-film counterparts by three orders of magnitude. Our findings underscore mesoscale ordering as a key strategy to achieving breakthroughs in hole-transport material engineering of solar cells.
Spiro-OMeTAD remains a prominent hole-transport material in perovskite and solid-state dye-sensitized solar cells. However, an understanding of its intrinsic hole-transport properties is still limited. Here, hole transport in spiro-OMeTAD is systematically characterized on the basis of the recently reported X-ray single-crystal data. An approach combining density functional theory calculations, tight-binding modeling, and kinetic Monte Carlo simulations are exploited to describe the key parameters governing hole transport and to investigate the transport mechanism and hole mobilities in the spiro-OMeTAD single crystal. The results provide insight into: (i) why an anisotropic hole-transport mechanism, with an upper range of intrinsic hole mobilities on the order of ~10−3 cm2/Vs, can be expected in the single crystal; and (ii) how detrimental factors, related to the presence of the spiro motif and of the 4,4′-dimethoxydiphenylamine substituents, limit the intrinsic hole mobilities of the system.
The polarization switching pathway plays a key role in deciding the magnitudes of the spontaneous polarization and the coercive electric field, which can be used to realize controllable ferroelectric properties. In this paper, by first-principles calculations, we reveal how the spontaneous polarization (Ps) and the switching barrier (Eb) of orthorhombic HfO2 (o-HfO2) respond to various lattice strains depending on two kinds of switching pathways, i.e., the shift-across (SA) pathway and the shift-inside pathway. It is revealed that the existence of the two pathways is most likely dependent on the interface termination of o-HfO2, and the SA pathway exhibits higher critical values of both Ps and Eb. By applying lattice strains on o-HfO2 (001) and (010) planes, a ferroelectric–paraelectric phase transition from the polar Pca21 to the nonpolar Pbcn can be observed. Importantly, the variation trends of Ps and Eb under the same lattice strains are found to be highly different depending on the switching pathways. However, by carefully designing the interfacial tail atoms, strain engineering can efficiently improve Eb and Ps for both pathways in o-HfO2 films. Our work uncovers the mechanisms of the switching pathways and opens a new avenue for preparing high-performance ferroelectric devices using strain engineering.
18 March 2024 in IEEE Transactions on Electron Devices
In this work, we demonstrate indium–gallium–zinc oxide (IGZO) transistors fabricated on an 8-in wafer with high uniformity, steep subthreshold slope, and high reliability under positive bias temperature instability (PBTI) stress. The impact of channel compositions, gate dielectrics, and post-treatment conditions on PBTI degradation is systematically characterized and analyzed. The negative threshold voltage ( ${V}_{\text {TH}}{)}$ shift under positive stress is found to be determined by both hydrogen (H) and oxygen vacancy ( $\text{V}_{\text {O}}{)}$ , which is the dominating factor with the highest time exponent in PBTI of IGZO transistors. By reducing H concentration and suppressing $\text{V}_{\text {O}}$ generation by process engineering in gate-stack, semiconductor channel, and post-treatment condition, IGZO transistors with high PBTI reliability are demonstrated, achieving a low $\vert \Delta {V}_{\text {TH}}\vert $ of 11 mV at 95 °C, ${V}_{\text {stress}}$ of 3 V ( ${t}_{\text {ox}}$ = 7 nm, EOT = 3.2 nm by ${C}$ – ${V}$ measurements, and ${E}_{\text {OX}}$ of 3.7 MV/cm), and ${t}_{\text {stress}}$ of 2 ks.
Oxygen defect impacts on ferroelectricity in Hf0.5Zr0.5O2 (HZO) are systematically studied on the basis of first-principles calculations. Importantly, the oxygen vacancy and Frenkel pair could enhance the spontaneous polarization (Ps) by an average of 14.5%, while Oi could largely reduce Ps of HZO by 44.8% on the contrary. The altered Ps and, accordingly, the remanent polarization (Pr) agree well with the experimental results of polarization variability. Oxygen vacancy induced Pr enlargement is revealed to be the underlying mechanism responsible for the wake-up effect. Our results provide a guideline to boost the ferroelectricity via defect engineering in ferroelectric HZO.