Rubén Echeverría

Rubén Echeverría


Research Focus & Metrics

Representative Publications

View All Publications
15 January 2026 in IEEE Access
Verified
Journal Article
Open access
JPJesús Paredes
Jesús Paredes
RERubén Echeverría
Rubén Echeverría
BPBorja Prieto
Borja Prieto
GBGurutz Artetxe Ballejo
Gurutz Artetxe Ballejo
MMMiguel Martinez-Iturralde
Miguel Martinez-Iturralde
ISIbon Simón
Ibon Simón
High power density machines are essential in sectors such as aeronautics, automotive and traction. In order to achieve high power densities, cooling systems that are capable of extracting large amounts of heat are required. In this regard, direct cooling systems, in which the stator conductors are in contact with the cooling fluid, are the most promising. For this reason, this paper presents a new direct flooded stator cooling system specifically aimed at conventional plug-in hairpin winding machines. Unlike other cooling systems, the proposed one presents a solution with channels between all its conductors and not only at the top or bottom of the slot. To demonstrate the capabilities of the proposed cooling system, a motorette has been manufactured and experimentally validated. The main characteristics of this cooling system are described, its potential is evaluated by applying it to a 250 kW and 10,000 rpm conceptual aeronautical motor design and, additionally, design guidelines for the sizing of equivalent cooling systems are given.

13 October 2026 in Remote Sensing
Verified
Journal Article
Open access
PDF file
RERubén Echeverría
Rubén Echeverría
LSLuis Santamaría
Luis Santamaría
FVFernando Parra Villarejo
Fernando Parra Villarejo
ADAdrián Delgado
Adrián Delgado
AGAdrián García-Gutiérrez
Adrián García-Gutiérrez
The vertical wind profile within the Atmospheric Boundary Layer (ABL) is a critical variable for a wide range of applications, including wind energy, air traffic and Unmanned Aerial System (UAS) management, pollutant dispersion, and urban air mobility. However, its accurate characterization typically requires expensive vertical-profiling LiDAR instruments, which limits the number of locations that can be simultaneously monitored. Building upon previous work in which machine-learning algorithms were trained on LiDAR data from the University of León (Spain) to reconstruct full ABL wind profiles from a single near-surface measurement, this study replaces the traditional data-driven neural network approach with Physics-Informed Neural Networks (PINNs), embedding a physical constraint directly into the loss function as evaluated by automatic differentiation, and tests two such constraints under architectural control: the Ekman boundary-layer momentum balance, closed with a Monin–Obukhov eddy viscosity, and a shear-constrained formulation based on a power-law profile with an inferred exponent. With dense supervision at the target heights, neither constraint improves on an architecture-matched network without a physical term (RMSE 1.35–1.36 m/s, direction MAE 20.1–20.4° across all three, Kruskal–Wallis p=0.0125). In a vertical-extrapolation protocol, training with gates up to 111 m, selecting models by their skill at 140 m, and testing blind on 170–300 m, the Ekman constraint shows no detectable advantage over its own architectural control. In contrast, the shear-constrained model does, reaching 1.80±0.01 m/s speed RMSE and 27.0°±0.3° direction MAE against 2.66±0.10 m/s and 34.2°±1.8° for the Ekman-constrained arm and 2.61±0.12 m/s and 33.9°±2.0° for the physics-free arm, which are statistically indistinguishable from one another; the shear-constrained gain is confirmed against its own architectural control (2.64±0.08 m/s, 33.0°±1.8°, matching the physics-free arm), ruling out the additional output as the explanation, and converts an erratic extrapolator into a stable one. The results are consistent with the benefit of embedding physics into the loss being therefore specific to the extrapolation regime and to the formulation tested, not a generic property of physics-informed learning. These findings are based on data from a single suburban site, and multi-site validation remains necessary before they can be generalized. By eliminating the need for continuous LiDAR operation after the training phase, the proposed methodology aims to enable cost-effective monitoring of multiple locations with a single instrument.

9 September 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
RERubén Echeverría
Rubén Echeverría
LSLuis Santamaría
Luis Santamaría
FVFernando Parra Villarejo
Fernando Parra Villarejo
ADAdrián Delgado
Adrián Delgado
AGAdrián García-Gutiérrez
Adrián García-Gutiérrez
The vertical wind profile within the Atmospheric Boundary Layer (ABL) is a critical variable 2 for a wide range of applications, including wind energy, air traffic and unmanned aerial 3 system (UAS) management, pollutant dispersion, and urban air mobility. However, its 4 accurate characterization typically requires expensive vertical-profiling LiDAR instruments, 5 which limits the number of locations that can be simultaneously monitored. Building upon 6 previous work in which machine-learning algorithms were trained on LiDAR data from the 7 University of León (Spain) to reconstruct full ABL wind profiles from a single near-surface 8 measurement, this study replaces the traditional data-driven neural network approach with 9 Physics-Informed Neural Networks (PINNs), embedding a physical constraint directly into 10 the loss function as evaluated by automatic differentiation, and tests two such constraints 11 under architectural control: the Ekman boundary-layer momentum balance, closed with a 12 Monin-Obukhov eddy viscosity, and a shear-constrained formulation based on a power-law 13 profile with an inferred exponent. With dense supervision at the target heights, neither 14 constraint improves on an architecture-matched network without a physical term (RMSE 15 1.35-1.36 m/s, direction MAE 20.1-20.4◦ across all three, Kruskal-Wallis p = 0.0125), and 16 in a vertical-extrapolation protocol, training with gates up to 111 m, selecting models 17 by their skill at 140 m, and testing blind on 170-300 m, the Ekman constraint shows 18 no advantage over its own architectural control, but the shear-constrained model does, 19 reaching 1.80 ± 0.01 m/s speed RMSE and 27.0◦ ± 0.3◦ direction MAE against 2.66 ± 0.10 20 m/s and 34.2◦ ± 1.8◦ for the Ekman-constrained arm and 2.61 ± 0.12 m/s and 33.9◦ ± 21 2.0◦ for the physics-free arm, which are statistically indistinguishable from one another; 22 the shear-constrained gain is confirmed against its own architectural control (2.64 ± 0.08 23 m/s, 33.0◦ ± 1.8◦, matching the physics-free arm), ruling out the additional output as 24 the explanation, and converts an erratic extrapolator into a stable one. The benefit of 25 embedding physics into the loss is therefore specific to the extrapolation regime and to the 26 formulation tested, not a generic property of physics-informed learning. By eliminating the 27 need for continuous LiDAR operation after the training phase, the proposed methodology 28 aims to enable cost-effective monitoring of multiple locations with a single instrument.