Establishing interoperability is an essential aspect of the often-pursued shift towards Model-Based Systems Engineering (MBSE) in, for example, aircraft development. If models are to be the primary information carriers during development, the applied methods to enable interaction between engineering domains need to be modular, reusable, and scalable. Given the long life cycles and often large and heterogeneous development organizations in the aircraft industry, a piece to the overall solution could be to rely on open standards and tools. In this paper, the standards Functional Mock-up Interface (FMI) and System Structure and Parameterization (SSP) are exploited to exchange data between the disciplines of systems simulation and geometry modeling. A method to export data from the 3D Computer Aided Design (CAD) Software (SW) CATIA in the SSP format is developed and presented. Analogously, FMI support of the Modeling & Simulation (M&S) tools OMSimulator, OpenModelica, and Dymola is utilized along with the SSP support of OMSimulator. The developed technology is put into context by means of integration with the M&S methodology for aircraft vehicle system development deployed at Saab Aeronautics. Finally, the established interoperability is demonstrated on two different industrially relevant application examples addressing varying aspects of complexity. A primary goal of the research is to prototype and demonstrate functionality, enabled by the SSP and FMI standards, that could improve on MBSE methodology implemented in industry and academia.
By introducing physically motivated time delays, simulation models can be partitioned into decoupled independent sub-models. This enables parallel simulations on multi-core processors. An automatic algorithm is used for partitioning and running distributed system simulations. Methods for sorting and distributing components for good load balancing have been developed. Mathematical correctness during simulation is maintained by a busy-waiting thread synchronization algorithm. Independence between sub-models is achieved by using the transmission line element method. In contrast to the more commonly used centralized solvers, this method uses distributed solvers with physically motivated time delays, making simulations inherently parallel. Results show that simulation speed increases almost proportionally to the number of processor cores in the case of large models. However, overhead time costs mean that models need to be over a certain size to benefit from parallelization.
Modeling and simulation are important tools for efficient product development. There is a growing need for collaboration, interdisciplinary simulation, and re-usability of simulation models. This usually requires simulation tools to be coupled together for co-simulation. However, the usefulness of co-simulation is often limited by poor performance and numerical instability. Achieving stability is especially hard for stiff mechanical couplings. A suitable method is to use transmission line modeling (TLM), which separates submodels using physically motivated time delays. The most established standard for tool coupling today is the Functional Mock-up Interface (FMI). Two example models in one dimension and three dimensions are used to demonstrate how the next version of FMI for co-simulation can be used in conjunction with TLM. The stability properties of TLM are also proven by numerical analysis. Results show that numerical stability can be ensured without compromising on performance. With the current FMI standard, this requires tailor-made models and custom solutions for the interpolation of input variables. Without using custom solutions, variables must be exchanged using sampled communication and extrapolation. In this case, stability properties can be improved by reducing communication step size. However, it is shown that stability cannot be achieved even when using unacceptably small communication steps. This motivates the need for the next version of FMI to include an intermediate update mode, where variables can be interchanged in between communication points. It is suggested that the FMI standard should be extended with optional callback functions for providing intermediate output variables and requesting intermediate input variables.
1 January 2018 in Modeling, Identification and Control: A Norwegian Research Bulletin
Composite modelling and simulation is a solution to utilize investments in models and tools, use the right tool for the right task, increase the accuracy by means of more accurate modelled boundary conditions, switch between levels in model complexity for a specific subsystem , and facilitate cooperation in organizations. With the new Functional Mock-up Interface (FMI) standardization, efforts are increasing to make this happen. SKF BEAST is an advanced dynamic simulation tool for rolling bearings and other mechanical systems with contacts. The tool incorporates a framework for composite modelling and cosimulation, i.e., a Master Simulation Tool (MST). It uses Transmission Line Modelling (TLM) to ensure robust numerical behaviour of the complete composite system model and supports the Functional Mock-up Interface (FMI) for model import, including both model exchange and co-simulation. In this paper, the tools and the techniques for composite modelling are discussed in further detail and application examples are given.
Here is information on how to publish, spread your research, and search for your publications. Most of LiU's research publications are directly imported into DiVA from the Web of Science. Before registering a publication, always check if the publication is already in DiVA!
Distributed system simulation can increase performance, re-usability and modularity in model-based product development. This thesis investigates four aspects of distributed simulation: multi-thread ...