Nonlinear reduced-order modeling approaches have been a promising tool for predicting the transonic aerodynamic and aeroelastic behaviors of aircraft structures. However, the accuracy of the approaches in predicting the transonic limit-cycle oscillations and aeroservoelastic behaviors needs to be further improved. For example, because of the complexity induced by the coupling among deflection of control surfaces, oscillating shock waves, structural vibration, and aerodynamic viscosity, it is difficult to adjust the system order and number of neurons of the Wiener-based reduced-order model. Moreover, the increasing of the system order may lead to overfitting. This paper presents a novel reduced-order aerodynamic modeling methodology based on the theory of nonlinear state-space identification. The accuracy of the method is demonstrated for predicting aerodynamic loads, limit-cycle oscillations, and frequency responses of aeroservoelastic systems at transonic flow conditions. Results are compared with full-order simulations solving the Reynolds-averaged Navier-Stokes equations.
In this paper, a reduced-order modeling approach based on computational fluid dynamics is presented for an elastic wing with control surfaces in the transonic regime. To treat the computational fluid dynamics grid around the geometrical discontinuities, due to the deflection of control surfaces, the constant volume tetrahedron method and the transpiration method are combined together without deforming the grid. Based on the input–output data from the computational fluid dynamics solver, one multiple-input/multiple-output discrete-time state-space model for the wing is identified via a robust subspace algorithm. For each control surface, one one-input/multiple-output discrete-time state-space model is identified using the same algorithm. With the precomputed state-space models for a few flight parameters, the generalized aerodynamic forces over a range of flight parameters can be computed by interpolating the output data. The methodology is applied to an elastic wing model with two control surfaces...
1 October 2020 in Journal of Fluids and Structures
Achieving low-frequency vibration attenuation in lightweight cylindrical lattices is critical for aerospace applications. This study proposes a multi-layered cylindrical lattice integrating five independent fluid cavities with locally resonant unit cells. To decouple the underlying attenuation mechanisms, a progressive design involving a continuous fluid column, segmented fluid cavities, and combined fluid–resonator configurations was investigated through experiments and finite-element simulations. Under the fully filled condition, the experimentally observed attenuation onset is approximately 684 Hz, compared with a numerically predicted onset of 631 Hz, while a strong attenuation regime extends to approximately 2000 Hz. Programmable fluid filling enables effective regulation of the attenuation onset, with the fully filled configuration exhibiting the lowest experimentally observed onset frequency. These findings demonstrate that fluid–structure coupling and local resonance can be synergistically exploited to achieve lightweight, broadband, and potentially tunable vibration isolation.
12 September 2018 in International Journal of Aerospace Engineering
In this study, a time-dependent surrogate approach is presented to generate the training data for identifying the reduced-order model of an unsteady aerodynamic system with the variation of mean angle of attack and Mach number in a transonic flight regime. For such a purpose, a finite set of flight samples are selected to cover the flight range of concern at first. Subsequently, the unsteady aerodynamic outputs of the system under given inputs of filtered white Gaussian noise at these flight samples are simulated via CFD technique which solves Euler equations. The unsteady aerodynamic outputs, which are viewed as a time-dependent function of flight parameters, can be approximated via the Kriging technique at each time step. By this way, the training data for any combination of flight parameters in the range of concern can be obtained without performing any further CFD simulations. To illustrate the accuracy and validity of the training data generated via the proposed approach, the constructed data are used to identify the reduced-order aerodynamic models of a NACA 64A010 airfoil via a robust subspace identification algorithm. The unsteady aerodynamics and aeroelastic responses under various flight conditions in a transonic flight regime are computed. The results agree well with those obtained by using the training data of CFD technique.