We report an experimental study of guided transmission of low-energy electrons through highly ordered nanocapillaries with large aspect ratio ( diameter and length). The nanochannel array was prepared using self-ordering phenomena during a two-step anodization process of a high-purity aluminum foil. The experimental results clearly show the existence of the guiding effect, as found for highly charged ions. The guiding of the electron beam was observed for tilt angles up to . As seen for highly charged ions, the guiding efficiency increases with decreasing electron incident energy. The transmission efficiency appeared to be significantly lower than observed for highly charged ions and, moreover, the intensity of transmitted electrons significantly decreases with decreasing impact energy.
Differential cross sections (DCSs) for elastic scattering of electrons from pyrimidine are presented for incident energies from 50 to 300 eV. The measurements were performed using a cross beam technique, for scattering angles from to . The relative DCSs were measured as a function of both the angle and incident energy and the absolute DCSs were determined using the relative flow method. The calculations of electron interaction cross sections are based on a corrected form of the independent-atom method, known as the screen corrected additivity rule procedure and using an improved quasifree absorption model. Calculated results agree very well with the experiment.
The electrospinning of Rhodamine B (RhB) -doped poly (methyl methacrylate) (PMMA) is presented as a promising technique for processing photo luminescent nanofibers. Nanofibers with concentrations of RhB in PMMA between 0.05 wt% and 2.0 wt% were studied. The FTIR spectrum, fiber morphology, thermal properties and optical properties of the nanofibers were investigated. The smooth, bead- free and nonporous nanofibers were obtained. Differential scanning calorimetry (DSC) results revealed that the Tg increased with the increasing of Rh B content up to a 0.5 wt% and beyond that decreased. The laser induced fluorescence (LIF) technique was used to study the fluorescence properties of the nanofibers. The maximum fluorescence emission was observed at a concentration of RhB of c = 0.2 wt%.