Lensless cameras are a novel class of computational imaging devices, in which the lenses are replaced with a thin mask to achieve ultra-compact and low-cost hardware. In this paper, we propose a method for high-throughput fabrication of lensless cameras designed with arbitrary point spread functions (PSFs) for various imaging tasks. The workflow of our method includes designing the smooth phase mask profiles for a given PSF pattern and then fabricating the mask in a single shot via the gray-scale lithography technique. Compared to the existing approaches, our combined workflow allows an ultra-fast and cost-effective fabrication of phase masks and is suitable for mass production and commercialization of lensless cameras. We show that our method can be used for a flexible production of custom lensless cameras with various pre-designed PSFs and effectively obtain images of the scene via computational image reconstruction. Finally, we discuss and demonstrate the future directions and the potential applications of our custom lensless cameras, including the deployment of the learned reconstruction networks for fast imaging and fingerprint detection via optical template matching.
Additive manufacturing has sought active and interactive means of creating predictable structures with diverse materials. Compared to such active manufacturing tools, current crystallization strategies remain in statistical and passive programs of crystals via macroscale thermodynamic controllers, commonly lacking active means to intervene in crystal growth in a spatiotemporal manner. Herein, a strategy toward active and interactive programming and reprogramming of crystals, realized by real‐time tangible feedback on growing crystals by delicately controlling the degree of in‐situ, localized photopolymerization of polymeric structures via additive manufacturing is presented. Using this strategy, crystals can be seeded, guided, and even reprogrammed in a supersaturated liquid resin. In principle, the localized formation of sparse polymeric networks within supercooled resins can induce density fluctuation to trigger seed nucleation instantaneously, whereas the formation of dense networks can lower molecules’ mobilities to inhibit crystal growth. Assisted by these active triggers and deterministic procedural aspects in additive manufacturing, growing crystals can be tangibly interacted through programmed polymeric structures, strengthening deterministic characteristics in crystal growth. It is suggested that crystal growth can be programmable with deterministic hierarchies within the created crystal's morphologies within the background of inherent stochasticity in crystallization, launching an era of convolutional growth of crystals.
We demonstrate that it is possible to produce microparticles with high deformability while maintaining a high effective volume. For significant particle deformation, a particle must have a void region. The void fraction of the particle allows its deformation under shear stress. Owing to the importance of the void fraction in particle deformation, we defined an effective volume index (V*) that indicates the ratio of the particle’s total volume to the volumes of the void and material structures. We chose polyethylene glycol diacrylate (Mn ~ 700) for the fabrication of the microparticles and focused on the design of the particles rather than the intrinsic softness of the material (E). We fabricated microparticles with four distinct shapes: discotic, ring, horseshoe, and spiral, with various effective volume indexes. The microparticles were subjected to shear stress as they were pushed through a tapered microfluidic channel to measure their deformability. The deformation ratio R was introduced as R = 1−Wdeformed/Doriginal to compare the deformability of the microparticles. We measured the deformation ratio by increasing the applied pressure. The spiral-shaped microparticles showed a higher deformation ratio (0.901) than those of the other microparticles at the same effective volume index.
Self-assembled configurations are versatile for applications in which liquid-mediated phenomena are employed to ensure that static or mild physical interactions between assembling blocks take advantage of local energy minima. For granular materials, however, a particle’s momentum in air leads to random collisions and the formation of disordered phases, eventually producing jammed configurations when densely packed. Therefore, unlike fluidic self-assembly, the self-assembly of dry particles typically lacks programmability based on density and ordering symmetry and has thus been limited in applications. Here, we present the self-assembly of particles with momentum, yielding regular arrays with programmable density and symmetry. The key is to embed anti-repellent structures, i.e. traps, that can capture kinetic particles individually and then robustly hold them against collisions with other momentum granules during a dynamic assembly procedure. By using anti-repellent traps, physical interactions between neighbouring particles can be inhibited, resolving many phenomena related to the uncertainty of space-sharing events in granular packing. With our self-assembly strategy, highly dense yet unjammed configurations are demonstrated, which conserve the inherent randomness in the location information of each granule in the trap and are useful for robust multilevel authentication systems as unique applications.
The ELISA is the most worldwide method for immunoassay. However, the ELISA is losing ground due to low reproducibility of manual experimental processes in both R&D and IVD areas. An automated platform is a good solution, but there are still limitations owning to extremely high cost and requiring large space to set up especially for a small size laboratory. Here, we present a novel all‐in‐one platform called “VEUS” settable on the laboratory table that offers comprehensive automation of the entire multiplex immunoassay process by exploiting antibody conjugated magnetic particles, quality control and then immunoanalytical reaction, thereby enhancing detection sensitivity and high reproducibility. As a proof of concept, the system exhibits a sensitive LOD of 0.6 and 3.1 pg mL−1 within 1 h run, comparable precision that of molecular diagnostic systems based on PCR method, enabling rapid multiplex diagnosis of Influenza A, Influenza B, and COVID‐19 viruses with similar symptoms. Through automation by the all‐in‐one system, it can be used by novice users, something innovative for immunoassays, relying heavily on user experience. Furthermore, it can contribute to streamline entire immunoassay processes of diverse biomarkers with high reproducibility and convenience in laboratories.