Industrialization of directed energy deposition (DED) process relies on the development and implementation of a quality assurance system that makes the process reliable and repetitive. One of the geometrical characteristics that needs constant monitoring and control during any DED process is the height of the deposited layer. In this paper, a multidirectional layer height monitoring system relying on the laser triangulation principle that has been developed for real-time direct measurement, in contrast to the majority of the sensor systems that derive layer height based on melt pool temperature, is presented. Existing commercial laser triangulation systems are unidirectional, which hinder the flexibility of the material handling system, like industrial robot, in most of the cases. An additional challenge lies on the integration with the deposition head due to its form, size, and extreme working conditions. Therefore, a novel configuration of laser triangulation sensors that enable multidirectionality and limit shadowing effect has been developed at Fraunhofer IAPT. In this paper, the development of such a sensor with a focus on the mechanical design has been presented. The sensor is designed for operation at high temperature and harsh environmental conditions close to the build zone. The developed sensor has been successfully tested for the powder-based laser metal deposition system. In-process layer height measurement and control are possible with this sensor, thereby enabling digitalization and quality assurance during the build process. 3D point cloud generated using this sensor can be used for the dimensional deviation measurement and also for downstream processes like machining. Such an in-process quality measurement and assurance system negates a postmeasurement step, thereby saving cost and time and ensuring quality.
Directed energy deposition (DED) is a key metal additive manufacturing process for large, high-value components. Nevertheless, its industrial adoption is hampered by complex process dynamics and limited process robustness. To address this complexity, Industry 4.0 methods are increasingly being explored to improve process understanding, monitoring, and control in DED. This paper investigates the Industry 4.0 maturity of DED with a particular focus on data-driven monitoring and control. A tailored adaptation of the acatech Industry 4.0 Maturity Index is applied at the process level, covering the stages of Visibility, Transparency, Predictive Capacity, and Adaptability. A structured Scopus- and Web of Science-based literature search, using stage-specific search strings, is conducted to identify and compare literature associated with these maturity stages. The resulting record counts are used as search-strategy-based indicators of research activity and are complemented by a content-based assessment of selected studies. The results show a strong concentration of work in powder-based DED with advanced melt pool monitoring, multimodal sensing, and machine-learning-based prediction of defects, geometry, and microstructure. However, the analysis reveals a pronounced gap at the Adaptability stage. Within the literature identified and analyzed in this review, process information is rarely embedded in closed feedback loops, and no fully self-improving DED control architecture was found. To address this gap, the paper proposes a two-level, data-driven control concept that combines a Process Quality Index (PQI) for real-time feedback with a Control Quality Index (CQI) for meta-level evaluation and optimization of control strategies. Powder-based DED is identified as a promising domain for implementing and validating this concept. The study thereby outlines development paths for advancing DED toward higher Industry 4.0 maturity and more reliable industrial deployment.