Lang Bai

Dr. Lang Bai


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2019 in Materials
Verified
Journal Article
Open access
PDF file
LBLang Bai
Lang Bai
YLYan Li
Yan Li
MYMingshun Yang
Mingshun Yang
YLYunbo Lin
Yunbo Lin
QYQilong Yuan
Qilong Yuan
RZRen-Feng Zhao
Ren-Feng Zhao
In order to solve the problem of low accuracy caused by instability and springback during the single point incremental forming (SPIF) process, static pressure support (SPS) and ultrasonic vibration (UV) are introduced into the technology for auxiliary forming. In order to qualitatively and quantitatively study the mechanism of static pressure support–ultrasonic vibration-single point incremental forming (SPS-UV-SPIF) force, a typical truncated cone is used as the research object. The working principle and motion rules of the technology are analyzed. The sheet micro-element of the sidewall area is taken as an analysis object. The spatial stress balance equation of the sheet is constructed. The various stresses are integrated and calculated. The forces in each area of the sheet are analyzed and modeled. Finally, an analytical model for SPS-UV-SPIF force is established. The influence law of the static pressure parameter and the vibration parameter on the forming force is obtained. The corresponding SPS system and UV system are designed. The Kistler forming force test system is built. The experimental results are consistent with the theoretical analysis results, which verifies the correctness of the analytical model.

1 January 2018 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
MYMingshun Yang
Mingshun Yang
ZYZimeng Yao
Zimeng Yao
YLYan Li
Yan Li
PLPengyang Li
Pengyang Li
FCFengkui Cui
Fengkui Cui
LBLang Bai
Lang Bai
An excessive thickness‐reducing ratio of the deformation zone in single point incremental forming of the metal sheet process has an important influence on the forming limit. Prediction of the deformation zone thickness is an important approach to control the thinning ratio. Taking the 1060 aluminum as the research object, the principle of thickness deformation in the single point incremental forming process was analyzed; the finite element model was established using ABAQUS. A formula with high accuracy to predict the deformation zone thickness was fitted with the simulation results, and the influences of process parameters, such as tool diameter, step down, feeding speed, sheet thickness, and forming angle, on thinning ratio were analyzed. The accuracy of the finite element simulation was verified by experiment. A method to control the thinning rate by changing the forming trajectory was proposed. The results showed that the obtained value by using the fitted formula is closer to the experimental results than that obtained by the sine theorem. The thinning rate of the deformation zone increases with the increase of tool diameter, forming angle, and sheet thickness and decreases with the increase of step down, while the feeding speed had no significant effect on the thinning ratio. The most important factor of the thinning ratio is the forming angle, and the thinning ratio can be effectively reduced by using the forming trajectory with a uniformly distributed pressing point.

1 April 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
MYMingshun Yang
Mingshun Yang
LBLang Bai
Lang Bai
YLYan Li
Yan Li
QYQilong Yuan
Qilong Yuan
With increasing design complexities of thin-walled parts, the requirement of enhanced formability has impeded the development of the single point incremental forming (SPIF) process. In the present research, the ultrasonic vibration-assisted single point incremental forming (UV-SPIF) method was introduced to increase the formability of sheet metals. AL1060 aluminum alloy was adopted as the experimental material, and a truncated cone part was considered as the research object. The simulation model of UV-SPIF was established to analyze the distribution of plastic strains in the formed part. A forming angle was selected as the measuring index of formability of the aluminum sheet, and the influences of different vibration parameters on formability were evaluated. An experimental platform was devised to verify the accuracy of the obtained simulation results. It was found that ultrasonic vibration effectively improved the forming limit of the sheet. When the amplitude was 6 µm and the frequency was 25 kHz, the sheet yielded the best formability with the largest forming angle of 67 degrees.

9 May 2019 in International Journal of Aerospace Engineering
Verified
Journal Article
Open access
MYMingshun Yang
Mingshun Yang
LBLang Bai
Lang Bai
LYLin Yunbo
Lin Yunbo
YLYan Li
Yan Li
YQYuan Qilong
Yuan Qilong
ZRZhao Renfeng
Zhao Renfeng
With the more and more complexity demands of the market, the geometric accuracy of the part has become the main factor restricting the development of single point incremental forming technology (SPIF). For this reason, with the truncated cone as the target part, the radial accuracy error generation mechanism was analyzed from the aspects of sheet springback and residual stress distribution. Four factors and three levels of surface response experiments were designed using the Box-Behnken Design (BBD) for tool head diameter, layer spacing, sheet thickness, and wall angle. The single and interactive influence law of the process parameters on the radial accuracy was obtained. In response to the above research results, the ultrasonic vibration was introduced into the process of SPIF to reduce springback by reducing residual stress. The influence of vibration parameters on the accuracy was obtained through experiments. The results showed that ultrasonic vibration could effectively improve and control the accuracy of the part.

1 January 2018 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
LBLang Bai
Lang Bai
YLYan Li
Yan Li
MYMingshun Yang
Mingshun Yang
ZYZimeng Yao
Zimeng Yao
ZYZhiyuan Yao
Zhiyuan Yao
In the field of plastic forming, ultrasonic vibration has the advantages of small forming force and high forming quality, and it has been introduced into a single‐point incremental plastic forming technique with high flexibility and high precision. The ultrasonic vibration single‐point incremental compound forming technology with all the above advantages has been achieved. To reveal the variation tendency of the forming force under ultrasonic vibration and single‐point incremental coupling, the process parameters (layer spacing, tool head radius, and feed rate) and vibration parameters (frequency and amplitude) on the forming force of the composite technology were quantitatively analyzed by theory, simulation, and experiment. The simulation and experimental results showed that ultrasonic vibration can significantly reduce the forming force of the composite technology. Compared with the simulation results, the theoretical results are not only closer to the experimental results but also have a shorter computation time and better prediction effect on the forming force. The change in the process parameters has a linear effect on the forming force, the nonlinearity of the vibratory parameters influences the forming force, and the frequencies and amplitudes in a suitable range allow the forming force to reach a minimum value. These conclusions have some significance for further studies on the ultrasonic vibratory single‐point incremental composite forming technology.

1 January 2014
Verified
Conference Paper
Open access
PDF file
LBLang Bai
Lang Bai
MYMingshun Yang
Mingshun Yang
YLYan Li
Yan Li