Victor Manuel Fontalvo Morales

Dr. Victor Manuel Fontalvo Morales

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2023 in Applied Thermal Engineering
Verified
Journal Article
Closed access
NONelson Ortega
Nelson Ortega
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
FGFabián Guerrero
Fabián Guerrero
MTMario Toledo
Mario Toledo
GAGerman Amador
German Amador

13 March 2019 in Journal of Electrochemical Energy Conversion and Storage
Verified
Journal Article
Closed access
PDF file
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
GNGeorge Nelson
George Nelson
HGHumberto A. Gomez
Humberto A. Gomez
MSMarco E. Sanjuan
Marco E. Sanjuan
In this work, a model of a proton exchange membrane fuel cell (PEMFC) is presented. A dynamic performance characterization is performed to assess the cell transient response to input variables. The model used in the simulation considers three different phenomena: mass transfer, thermodynamics, and electrochemistry. The main sources of voltage loss are presented: activation, electrical resistance, and concentration. The model is constructed to avoid the use of fitted parameters, reducing the experimentation required for its validation. Hence, the electrochemical model is parameterized by physical variables, including material properties and geometrical characteristics. The model is demonstrated as a test-bed for PEMFC control system design and evaluation. Results demonstrate that the steady-state and dynamic behavior of the system are represented accurately. A case study is included to show the functionality of the model. In the case study, the effect of the purge valves at the fuel cell discharges is analyzed under different scenarios. Regular purges of the cathode and the anode are shown to achieve a good performance in the system avoiding reactant starvation in the cell. A closed-loop dynamic response is included as an example of the model capabilities for the design of fuel cell control strategies. Two variables were selected to be controlled: voltage and pressure difference across the membrane. A multivariate control strategy was tested and its dynamic response was analyzed. It was found that there was a strong interaction between the control loops, making the control of the system a challenge.

3 November 2017
Verified
Conference Paper
Closed access
PDF file
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
DIDanny Illera
Danny Illera
HGHumberto Gómez
Humberto Gómez
MSMarco Sanjuan
Marco Sanjuan
Computational Fluid Dynamics (CFD) models allows the three-dimensional simulation of the complex electrochemical, fluid dynamics, and thermodynamic phenomena related to the temperature and pressure distribution in the channels and the porous media than occurs inside the fuel. This work presents a CFD Multiphysics simulation of a PEM Fuel Cell under different operational conditions in their inlet streams. The simulation was done by using COMSOL Multiphysics® software, and it takes into account the mass transfer of gases in the channels, the porous media and the electrochemistry from reactions in a 5 cm2 active area. From the electrochemical perspective, the relationship between the charge transfer and the overpotentials are taken into account by kinetic expressions. In addition, the ohm’s law is applied in conjunction with the charge transfer to describe the conduction of current in the electrodes and electrolytes. Gas diffusion layers (GDL) along with the catalyst layers are modeled as porous media restricting the electrochemical reaction. As the result of different simulation scenarios representing different operational conditions, the characteristic Polarization Curve of the fuel cell, the dependence between the voltage in the cell, and the demanded current by the load are obtained. A reduction in the electrical potential was evidenced due to the reaction activation potential, the ohmic losses due to the electrical resistance of the materials and the concentration losses as a result of deficiencies in the diffusion of the reactants through the porous medium. Currents distributions and water content are analyzed in order to understand the role of temperature, load, and humidity over the fuel cell performance.

13 November 2015
Verified
Conference Paper
Closed access
PDF file
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
MSMarco Sanjuan
Marco Sanjuan
HVHumberto Gómez Vega
Humberto Gómez Vega
This paper presents, an open cathode fuel cell dynamic model and an advanced control system design that allows to study the transient response of the system and its nonlinearities. The model can be used to design control strategies and design test benches to test fuel cells stacks. A dynamic performance characterization is performed (transient response to disturbances or setpoint changes), and the information is used to propose the structure of a control system capable of incorporating expert information and transition in non-linear regions. The model used in the simulation takes account of three different phenomena: (a) mass transfer, (b) thermodynamics and (c) electrochemical. The fuel cell uses hydrogen and air to generate electricity. The hydrogen is supplied to the fuel cell anode and the air is supplied to the fuel cell cathode. This model allows the calculation of the pressure and mass flow circulating in the cell. Balances are presented for cathode, anode and membrane. The energy balance proposed includes the electrochemical reaction that is exothermic and the heat transfer to the air flowing through the cathode which has to supply the electrochemical reaction with the oxygen required and regulate the stack temperature. The ideal electric potential of a fuel cell is defined by the Nernst equation. The Nernst equation alone is not enough to describe the electrical potential during the actual operation of the system. The main sources of voltage loss are presented: Activation, electrical resistance and concentration. PEM control system is designed and simulated. A model–based algorithm is used to achieve different objectives than could lead to an improvement in the system performance. Results demonstrate that the predictions in voltage and current in the fuel cell stack are close to experimental data obtained from manufacturer. Constraints in the algorithm allow avoiding hazardous operational conditions and a decrease in controlled variable variance.

5 November 2025 in IEEE Access
Verified
Journal Article
Open access
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
HRHeriberto Enrique Maury Ramirez
Heriberto Enrique Maury Ramirez
MSMarco Sanjuan
Marco Sanjuan
Numerous types of manufacturing equipment operate predominantly in the transient regime, where productivity relies on the rapid response of their drive systems. Therefore, selecting an appropriate drive system for applications with short displacement time cycles is crucial for optimizing manufacturing performance. This work introduces a novel selection methodology that integrates two complementary approaches for an optimal choice of quick-action drives in advanced manufacturing systems, including robotic drive mechanisms. The Transient Power - Double Kinetic Energy Method (P'-2K Method) and the Torque - Electromechanical Time Constant Method are systematically combined to enhance selection accuracy. A key advantage of this methodology, which consists of a seven-step method proposed, is that it simultaneously considers the influence of all electromechanical parameters on drive system dynamic performance, an aspect often overlooked by previous methods. The proposed methodology is also demonstrated by selecting and implementing the drive system for a CNC Punching Machine developed within an R&D project funded by the Colombian National Science Foundation (MinCiencias). The dynamic models obtained were implemented in an engineering application to simulate drive performance using data from manufacturers' catalogs, allowing a comparative evaluation of different drive system alternatives. The case study analysis identifies the advantages, limitations, and complementarity of the two methods, highlighting their potential for improving the efficiency and responsiveness of automated manufacturing processes. Furthermore, this study outlines additional considerations necessary for achieving an optimized design of drive systems in high-speed transient manufacturing applications.

16 November 2020
Verified
Conference Paper
Closed access
PDF file
VMVictor Manuel Fontalvo Morales
Victor Manuel Fontalvo Morales
DIDanny Illera
Danny Illera
MSMarco E. Sanjuan
Marco E. Sanjuan
HGHumberto A. Gomez
Humberto A. Gomez
Fuel cell system manufacturing process is not a defect-free process, therefore, the impact of typical defects in the electrodes (i.e. Gas Diffusion Layer (GDL)) surface has to be taken into consideration when the fuel cell system is being designed. To assess the impact of the defect on the performance, two approaches were taken into consideration. Initially, the fuel cell system was simulated using a unidimensional (1D) dynamic model which took into consideration mass transfer, heat transfer, and electrochemical phenomena. The second approach was experimental, using a 5 sq.cm PEM fuel cell, the impact of the GDL porosity on the fuel cell system was studied. Also, the system response under different load changes was investigated. After that, experimental results are presented to give a better insight into the phenomena analyzed, mainly on the dynamic system response. Cracks and catalyst clusters were the main defects analyzed, both of them were observed in new membranes assemblies. To control the defects, new membranes assemblies were tested, and after that, defects were induced using Nafion solution and catalyst powder to emulate the presence of catalyst clusters. For the cracks, some fibers in the GDL cloth were cut to emulate the defect. Membranes now with defects were tested again to compare its performance and detect any performance loss due to the physical changes in the electrodes. Results indicate a strong correlation between the porosity and the supply air pressure and the system time constants. Also, the impact of the defects was evidenced in the dynamic system response, after step changes in the operating conditions.