Seok-Joon Hwang

Prof. Dr. Seok-Joon Hwang

Department of Biosystems Engineering, Kangwon National University
+1
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2022 in Biosystems Engineering
Verified
Journal Article
Closed access
MJMoon-Kyeong Jang
Moon-Kyeong Jang
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JKJeong-Hun Kim
Jeong-Hun Kim
Ju Seok NamJu Seok Nam
Ju Seok Nam

9 December 2020 in Agronomy
Verified
Journal Article
Open access
PDF file
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JPJeong-Hyeon Park
Jeong-Hyeon Park
JLJu-Yeon Lee
Ju-Yeon Lee
SSSung-Bo Shim
Sung-Bo Shim
Ju Seok NamJu Seok Nam
Ju Seok Nam
In this study, the lengths of the main links of the transplanting device of a semi-automatic vegetable transplanter were optimized to reduce the weight at the same planting trajectory. The theoretical planting trajectory was obtained from the kinematic analysis for the link structure of the transplanting device and verified through kinematic simulation using commercial software and actual measurement using high-speed camera. Then, the lengths of the main links that have a great influence on the planting trajectory were optimized to have a minimum total length at the same planting trajectory. A genetic algorithm was used as an optimization tool. As a result, with the optimal lengths of the main links, the same planting trajectory was maintained while reducing the total length by 18.32% compared to the conventional one. The transplanting device with the optimal main link lengths would have benefits in terms of agricultural economy by reducing manufacturing and fuel costs.

6 February 2021 in Agronomy
Verified
Journal Article
Open access
PDF file
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JMJang Moon-Kyeong
Jang Moon-Kyeong
Ju Seok NamJu Seok Nam
Ju Seok Nam
This study analyzed the lateral overturning and backward rollover characteristics of a multi-purpose agricultural machine recently developed in South Korea. Free body diagrams for theoretical analysis and a three-dimensional model for dynamic simulation were created by reflecting the actual dimensions and material properties of the multi-purpose agricultural machine. The simulation model was verified using the minimum turning radius and angle of static falling down sidelong derived through the certified performance test. The lateral overturning and backward rollover characteristics of the multi-purpose agricultural machine were analyzed using a verified simulation model and theoretical equations derived through literature review. In the lateral overturning analysis, the critical traveling speed at which lateral overturning occurs was derived according to the inner steering angle of the front wheels under steady-state turning conditions. In the backward rollover analysis, the critical angular velocity and theoretical traveling speed of the main body at which backward rollover occurs were derived according to lifting angle of the front wheels. There was no significant difference between the theoretical analysis and simulation results at 5% significance level, and we derived the appropriate traveling speed conditions of the multi-purpose agricultural machine that do not cause lateral overturning and backward rollover.

6 December 2022 in Agronomy
Verified
Journal Article
Open access
PDF file
JMJang Moon-Kyeong
Jang Moon-Kyeong
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
Ju Seok NamJu Seok Nam
Ju Seok Nam
The effects of the slope of the ground and the obstacle conditions on the lateral overturning/backward rollover of a tractor with an implement were analyzed through dynamic simulation. The tractor and implement’s 3D simulation model was constructed. As for simulation conditions, four heights and three shapes were set for obstacles, and eight slopes were set for the ground to be traveled by the implemented tractor. Under each condition, the critical speed at which the tractor begins to overturn and roll over was derived, and factors that caused the overturn and rollover were analyzed. As a result of instability types, backward rollover happens when the ground slope is low and lateral overturning happens at a specific slope or higher regardless of the obstacle conditions. In the case of the tractor and implement under study, the tendency changed at a slope of 25°. As the obstacle height increased, overturning and rollover safety decreased. In the case of the obstacle shape, safety was lowest for the rectangular obstacle and highest for the right-side triangular obstacle. The driving safety of the tractor with the implement was lower than that of the tractor with no implement. This appears to be mainly due to the change in the position of the center of gravity caused by the attached implement. The critical speed of the tractor with the implement was 3.26 times lower than that of the tractor with no implement on average. It is judged that the safety of the implemented tractor can be identified by using this study.

11 August 2022 in Agronomy
Verified
Journal Article
Open access
PDF file
SMSri Markumningsih
Sri Markumningsih
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
Ju Seok NamJu Seok Nam
Ju Seok Nam
The goal of this research was to analyze the load and safety of the transplanting device of the 4-bar link type semi-automatic vegetable transplanter under different workload conditions. To measure the strain at the transplanting device, a load measurement system was developed using 15 strain gauges. Field tests were conducted at 4 levels of engine speeds (750, 1000, 1250, and 1500 rpm) and 10 levels of the planting distance (0.29–0.47 m). The static safety factor was defined as the ratio between the strength of the material and the maximum stress in the transplanting device. The calculated stress data were converted from the time domain to the frequency domain using the rain-flow counting methods and Goodman’s Equation. The sum of fatigue damage was acquired based on the Palmgren–Miner’s rule. It was observed that the stresses increased with increasing engine speed and planting distance. The results show the higher engine speed and the longer planting distance will decrease the static safety factor and fatigue life. The static safety factor value was more than 1.0 for all locations and all working conditions. The minimum fatigue life was 49,153.3 h at link A (S_14), under the working condition of engine speed 750 rpm and planting distance of 0.35 m.

15 October 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
SKSeung-Jun Kim
Seung-Jun Kim
HLHyeon Seung Lee
Hyeon Seung Lee
Seok-Joon HwangSeok-Joon Hwang
Seok-Joon Hwang
JKJeonghun Kim
Jeonghun Kim
JMJang Moon-Kyeong
Jang Moon-Kyeong
Ju Seok NamJu Seok Nam
Ju Seok Nam
In this study, we developed a monitoring system to accurately track the seeding rate and to identify the locations where the mechanical pot-seeding machine failed to sow seeds correctly. The monitoring system employs diverse image processing techniques, including the Hough transform, hue–saturation–value color space conversion, image morphology techniques, and Gaussian blur, to accurately pinpoint the seeding rate and the locations where seeds are missing. To determine the optimal operating conditions for the seeding rate monitoring system, a factorial experiment was conducted by varying the brightness and saturation values of the image data. When the derived optimal operating conditions were applied, the system consistently achieved a 100% seed recognition rate across various seeding conditions. The monitoring system developed in this study has the potential to significantly reduce the labor required for supplementary planting by enabling the real-time identification of locations where seeds were not sown during pot-seeding operations.