Giuseppe Genduso

Dr. Giuseppe Genduso

Advanced Membranes & Porous Materials Center, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2014 in Green Chemistry
Verified
Journal Article
Open access
PDF file
AAAntonio Amelio
Antonio Amelio
GGGiuseppe Genduso
Giuseppe Genduso
SVSteven Vreysen
Steven Vreysen
Patricia LuisPatricia Luis
Patricia Luis
BBBart Van der Bruggen
Bart Van der Bruggen
The aim of this paper is to develop guidelines in order to assist in decision making with respect to treatment options of waste solvents, and more importantly for the choice of solvent in the design of the process a priori, from an environmental point of view based on the composition of a mixture. Life cycle assessment (LCA) was used to evaluate two treatment alternatives: continuous distillation and incineration. The software Ecosolvent® v.1.0.1 was used to perform the LCA, considering two scenarios (the best and worst scenarios) and five environmental indicators: Eco-indicator 99, UBP-97, global warming potential, cumulative energy demand and CO2-balance. From the results, it can be concluded that the environmental impact originating from the production of the solvents is the main issue to consider for the selection of distillation or incineration as the treatment method during the process design. In general, those solvents with a low impact during their production stage were found to be candidates for incineration. Moreover, those compounds that yield a great environmental burden during the production step should be always recovered in order to minimize the total impact. A series of charts is presented as guidelines to select the most environmentally favorable alternative for mixtures of solvents, and to select which solvent to use considering the environmental effects that are produced. Regarding the information given by the different indicators, it was observed that all the studied indicators lead to the same conclusions for the evaluated mixtures with some exceptions for UBP-97.

14 October 2019 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Closed access
MAMahmoud A. Abdulhamid
Mahmoud A. Abdulhamid
GGGiuseppe Genduso
Giuseppe Genduso
YWYingge Wang
Yingge Wang
XMXiaohua Ma
Xiaohua Ma
IPIngo Pinnau
Ingo Pinnau

8 January 2019 in Membranes
Verified
Journal Article
Open access
PDF file
GGGiuseppe Genduso
Giuseppe Genduso
BGBader S. Ghanem
Bader S. Ghanem
IPIngo Pinnau
Ingo Pinnau
The nonideal behavior of polymeric membranes during separation of gas mixtures can be quantified via the solution-diffusion theory from experimental mixed-gas solubility and permeability coefficients. In this study, CO2-CH4 mixtures were sorbed at 35 °C in 4,4′-(hexafluoroisopropylidene)diphthalic dianhydride (6FDA)-m-phenylenediamine (mPDA)—a polyimide of remarkable performance. The existence of a linear trend for all data of mixed-gas CO2 versus CH4 solubility coefficients—regardless of mixture concentration—was observed for 6FDA-mPDA and other polymeric films; the slope of this trend was identified as the ratio of gas solubilities at infinite dilution. The CO2/CH4 mixed-gas solubility selectivity of 6FDA-mPDA and previously reported polymers was higher than the equimolar pure-gas value and increased with pressure from the infinite dilution value. The analysis of CO2-CH4 mixed-gas concentration-averaged effective diffusion coefficients of equimolar feeds showed that CO2 diffusivity was not affected by CH4. Our data indicate that the decrease of CO2/CH4 mixed-gas diffusion, and permeability selectivity from the pure-gas values, resulted from an increase in the methane diffusion coefficient in mixtures. This effect was the result of an alteration of the size sieving properties of 6FDA-mPDA as a consequence of CO2 presence in the 6FDA-mPDA film matrix.

1 March 2015 in Electrochimica Acta
Verified
Journal Article
Closed access
HFH. Farrokhzad
H. Farrokhzad
SDS. Darvishmanesh
S. Darvishmanesh
GGGiuseppe Genduso
Giuseppe Genduso
TGTom Van Gerven
Tom Van Gerven
Bart Van der BruggenBart Van der Bruggen
Bart Van der Bruggen

5 June 2018 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
TPTiara Puspasari
Tiara Puspasari
TCTina Chakrabarty
Tina Chakrabarty
GGGiuseppe Genduso
Giuseppe Genduso
KPKlaus-Viktor Peinemann
Klaus-Viktor Peinemann
A novel method for the preparation of cellulose–polydimethylsiloxane (PDMS) blend membranes for organic solvent nanofiltration (OSN) and ethanol pervaporation is presented. The elegance of this approach lies in the use of trimethylsilyl cellulose (TMSC), a hydrophobic cellulose derivative, for blend membrane fabrication followed by simple hydrolysis to convert TMSC back to cellulose. The use of TMSC not only allows cellulose processing in common organic solvents, but also enables the creation of highly compatible cellulose–PDMS blend membranes. The appropriate composition of the blend membrane gave the best OSN performance with more than 10 L m−2 h−1 bar−1 acetone permeance and around 750 Da molecular weight cut-off. This blend membrane can be used for OSN with any other solvents regardless of their polarity. The same membrane also showed an excellent pervaporation performance with a separation factor of 14 and a flux of 1.6 kg m−2 h−1 using a 5 wt% ethanol water mixture at room temperature. The blending of PDMS with cellulose resulted in a 100% increase of the separation factor when compared with pure PDMS. This surprising performance is a consequence of the good miscibility of the blending polymers, which can be obtained through this unique pathway. Overall, this study demonstrates a simple, efficient, and scalable method that is the only possible way reported to date to combine the superiority of cellulose and PDMS as a low-cost and stable membrane for solvent separation.

25 September 2018 in ACS Omega
Verified
Journal Article
Open access
BGBader S. Ghanem
Bader S. Ghanem
FAFahd Alghunaimi
Fahd Alghunaimi
YWYingge Wang
Yingge Wang
GGGiuseppe Genduso
Giuseppe Genduso
IPIngo Pinnau
Ingo Pinnau
A simple synthetic route to a novel sterically hindered triptycene-based diamine, 1,3,6,8-tetramethyl-2,7-diaminotriptycene (TMDAT), and its use in the preparation of high molecular weight polyimides of intrinsic microporosity (PIM-PIs) are reported. The organosoluble TMDAT-derived polyimides displayed high Brunauer–Emmett–Teller surface areas ranging between 610 and 850 m2 g–1 and demonstrated excellent thermal stability of up to 510 °C. Introduction of the rigid three-dimensional paddlewheel triptycene framework and the tetramethyl-induced restriction of the imide bond rotation resulted in highly permeable polyimides with moderate gas-pair selectivity. The best performing polyimide made from TMDAT and a triptycene-based dianhydride showed gas transport properties located between the 2008 and 2015 polymer permeability/selectivity trade-off curves with H2 and O2 permeabilities of 2858 and 575 barrer combined with H2/N2 and O2/N2 selectivities of 24 and 4.8, respectively, after 200 days of physical aging.