Two-layer films of partially fluorinated graphene (PFG) with graphene quantum dots and polyvinyl alcohol (PVA) were prepared by means of 2D printing technology. A stable resistive switching effect with the ON/OFF current ratio amounting from one to 4–5 orders of magnitude is found. The decrease in the PVA thickness leads to a change of the unipolar threshold switchings to the bipolar resistive switchings. The crossbar Ag/PFG/PVA/Ag structures retain their performance up to 6.5% deformation. The switching phenomenon is observed for a period about a year. The traps with characteristic activation energies ∼0.05 eV are suggested to be responsible for resistive switching. The time of charge-carrier emission from the localized states was found to be ∼5 μ s. A quality model to describe the resistive switching effect in two-layer films implying the conduction over quantum dots proceeding with the participation of active traps at the PFG/PVA interface is proposed. The structures with the design demonstrated threshold resistive switching have their high potential for development of selector devices integrated to sensor or memristors circuits, for information storage and data processing, for flexible and wearable electronics. The structures with lower PVA thickness and the bipolar threshold switching are perspective for non-volatile memory cells for printed and flexible electronics.
23 June 2017 in Physical Chemistry Chemical Physics
This study is devoted to the production and investigation of dielectric films, based on oxidized and fluorinated graphene suspensions. The properties of the graphene oxide films may be greatly improved by adding fluorographene. FG films have transmission in the visible and near infrared ranges equal to 96–98%. Two-layer films of fluorinated graphene on graphene oxide and composite films (composite suspension of fluorinated and oxidized graphene) exhibit good insulating properties. Their leakage currents are lower than that in the graphene oxide or fluorinated graphene by 3–5 orders of magnitude. A significant increase in thermal stability and relatively low charge in the film and at the interface with silicon (3 × 1010–1.4 × 1011 cm−2) are also found for these films. An application of thin fluorographene films (a few nanometers) decorates and eliminates structural defects in the graphene oxide films, resulting in conductivity blocking in graphene oxide. The built-in charge density in the composite film of 10–20% fluorographene in the graphene oxide is much less than in the two-layer film (<1 × 1010 cm−2). The created two-layer and composite films may be practically applied in 2D printed and flexible electronics as insulating films (gate dielectric and interlayer insulator), as well as materials showing the resistive effect.
Individual core-shell vanadium oxide (V 2 O 5 )/fluorinated graphene (FG) nanoparticles make it possible to achieve bipolar resistive switchings, reproducible during 10 4 switching cycles, with the ON/OFF current ratio reaching 10 3 -10 5 .
The structure and electric properties of hexagonal boron nitride (h-BN):graphene composite with additives of the conductive polymer PEDOT:PSS and ethylene glycol were examined. The graphene and h-BN flakes synthesized in plasma with nanometer sizes were used for experiments. It was found that the addition of more than 10−3 mass% of PEDOT:PSS to the graphene suspension or h-BN:graphene composite in combination with ethylene glycol leads to a strong decrease (4–5 orders of magnitude, in our case) in the resistance of the films created from these suspensions. This is caused by an increase in the conductivity of PEDOT:PSS due to the interaction with ethylene glycol and synergetic effect on the composite properties of h-BN:graphene films. The addition of PEDOT:PSS to the h-BN:graphene composite leads to the correction of the bonds between nanoparticles and a weak change in the resistance under the tensile strain caused by the sample bending. A more pronounced flexibility of the composite films with tree components is demonstrated. The self-organization effects for graphene flakes and polar h-BN flakes lead to the formation of micrometer sized plates in drops and uniform-in-size nanoparticles in inks. The ratio of the components in the composite was found for the observed strong hysteresis and a negative differential resistance. Generally, PEDOT:PSS and ethylene glycol composite films are promising for their application as electrodes or active elements for logic and signal processing.
A new approach to creating a new and locally nanostructured graphene-based material is reported. We studied the electric and structural properties of partially fluorinated graphene (FG) films obtained from an FG-suspension and nanostructured by high-energy Xe ions. Local shock heating in ion tracks is suggested to be the main force driving the changes. It was found that ion irradiation leads to the formation of locally thermally expanded FG and its cracking into nanoparticles with small (∼1.5–3 nm) graphene quantum dots (GQD), embedded in them. The bandgap of GQD was estimated as 1 -1.5 eV. A further developed approach was applied to correct the functional properties of printed FG-based crossbar memristors. Dielectric FG films with small quantum dots may offer prospects in graphene-based electronics due to their stability and promising properties.