The attachment point of the polymer chain to a force‐responsive molecular unit (mechanophore) is a decisive parameter determining bond scission rate and ultimately the mechanochemical reaction outcome. However, such regiochemical polymer substituent effects have not yet been investigated for 9‐π‐extended anthracene‐maleimide Diels‐Alder adducts. Here we combine three methods, namely ultrasonication, CoGEF computation, and flow activation, to understand the influence of the pulling point location on the mechanochemical reactivity of this mechanophore class. We find minor mechanochemical reactivity differences between the investigated constitutional mechanophore isomers. Concomitantly, our results highlight the capabilities and limitations of the employed experimental techniques for such delicate variances and raise the question whether these are relevant for mechanochemical applications in a material context.
Polylactic acid (PLA) is a bio-based thermoplastic whose inherent brittleness limits mechanically demanding applications. This study investigates how a bio-based chitin–lecithin plasticiser system affects the mechanical behaviour of injection-moulded PLA as a function of additive composition, testing temperature, and annealing-induced crystallisation. Tensile and notched Charpy impact tests were performed under ambient conditions, complemented by dynamical mechanical characterisation, tensile testing at 40 and 50 °C, and DSC analysis after annealing at 130 °C for 2 h. Chitin alone increased Young’s modulus from 0.95 ± 0.08 to 1.26 ± 0.02 GPa but reduced ductility and impact strength. In contrast, ternary formulations showed increased deformability at low-to-intermediate additive contents, with fracture strain increasing from 6.87 ± 0.61% for neat PLA to 27.38 ± 3.73%. Dynamical mechanical characterisation showed only a small shift in the glass-transition temperature, while tensile deformability increased strongly as the testing temperature approached the glass-transition range. Annealing lead to crystallinities of approximately 43–45% in the ternary formulations and reduced fracture strain by 86–93%. These results indicate that the chitin–lecithin system promotes deformation of the amorphous PLA phase without a pronounced reduction in bulk glass-transition temperature, while crystallisation largely suppresses this effect.