Sand production is a serious problem widely existing in oil/gas production. The problems resulting from sand influx include abrasion of downhole tubular/casing, subsurface safety valve and surface equipment; casing/tubing buckling, failure of casing or liners from removal of surrounding formation, compaction and erosion; and loss of production caused by sand bridging in tubing and/or flow lines. There are several methods for predicting sand production. The methods include use of production data, well logs, laboratory testing, acoustic, intrusive sand monitoring devices, and analogy. The methodologies are reviewed and the data needed for predicting sand production are enumerated. The technique used in this paper involves the calculation of shear modulus, bulk compressibility, and the ratio of shear modulus to bulk compressibility. The shear modulus to bulk compressibility ratio has been related empirically to sand influx. This Mechanical Properties Log method works 81% of the time. This technique is supported with examples and case studies from regions around the world known for sand production. The authors collected the information of the “Kaki and Bushgan Oilfield in Iran”, set a sand production prediction to predict sand production potential. The technique has been successfully applied in reservoirs and results have been compared with testing data