This article introduces a method to provide a continuous one-way sweep of the axis modes in a Fabry-Pérot (FP) cavity without sweeping the cavity mirror. The concept is based on the geometrical phase for circularly polarized light. When a geometric phase shifter (GPS) composed of fixed and rotating phase plates is arranged within an FP cavity, the frequencies of the axis modes are controlled by the angle of the phase plate. Two types of GPS configuration are proposed and experimentally demonstrated, providing two tunable ranges of the axis modes per revolution (these being two or four times as wide as the free spectral range). Neighboring axis modes are connected by continuous rotation.
The optimisation of reaction temperature and time has been made in the oxynitridation of SiO2 in N2O by evaluating its dielectric properties at a constant current stress. It is found that N2O-oxynitrided SiO2 films are much improved in both charge trapping density and charge to breakdown when the optimum oxynitridation process (O2, 1100°C, 5 s and following N2O, 1200°C, 25 s) is chosen.
A vector beam is a type of topological beam in which the polarization direction of light rotates around a singularity on the wavefront. This paper proposes a method to generate a vector beam by tightly focusing a pump beam in the crystalline direction such that the second-order nonlinear optical effect is forbidden. The directional dependence of the effective nonlinearity in zincblende crystals, such as ZnTe, was analytically investigated. Two types of nonlinear polarization singularities were found in [111] and [100] directions. Their polarization topological charge ℓ was +1 and −1, respectively. To experimentally demonstrate the proposed method, a (111) cut ZnTe crystal was selected as the nonlinear crystal. The polarization state of the generated terahertz (THz) beams was measured with a custom-built THz spectroscopic polarization imaging system. Radially polarized distributions were observed within the entire generated spectral region. Such a broadband feature of the generated vector beam is likely due to the topological nature of the focused pump beam, where the wavevectors are winding once about the optical axis. This simple method for generating THz vector beams will accelerate its applications.
The bull’s-eye structure in the terahertz (THz) frequency region has ample applications owing to its ability to focus free-propagating waves into subwavelength apertures, resulting in enhanced transmission, that is, extraordinary transmission. However, its coupling properties have been primarily discussed in terms of the normal plane-wave incidence to the structure. In this study, we investigate the multiple resonances in extraordinary transmission with normal and oblique incident waves. The experiment using a widely tunable and high-power THz wave source revealed two types of resonances. The main resonance split depends on the incident angle, and the other corresponds to the side lobe of the main resonances. The results are explained by a simple analytical model using a finite number of scattering media. The analysis is supported by the full-wave simulation using the finite-element method, which agrees with the experimental results. The coupling mechanisms will be applicable to design devices, such as THz biosensing devices or THz antennas for rapid communication systems.
We propose a simple method to generate a frequency-multiplexed terahertz multiple vortex beam using a spiral phase plate and a metallic mask. Using a broadband terahertz source, we experimentally demonstrate the conversion of a terahertz Gaussian beam into a frequency-multiplexed single or multiple vortex beam with topological charges ranging from 1 to 3, which is supported by simulations. This multifunctional device opens new possibilities for high-speed THz communication, information processing, and high-efficiency terahertz wavefront manipulation devices.