Selective Laser Melting (SLM) is a direct fabrication of part through layer by layer powder deposition and successive laser beam irradiation based on Computer Aided Design (CAD) data. One of the important properties in SLM is thermal conductivity of metal powder. This is because the ability of metal powder to conduct heat will affect the consolidation process during SLM. In this paper, thermal conductivity of metal powders with different particle diameters and their mixture was analysed. Other than that, thermal conductivity of consolidated materials fabricated via SLM process was also studied. In order to measure the thermal conductivity of metal powder, a theoretically verified method which was previously developed by the authors was used. Determination of thermal conductivity of consolidated material was analysed using laser flash technique. It was found that the thermal conductivity of powder metal was influenced by bulk density and particle diameter of metal powder. In this study also, metal powders of different particle diameters were mixed with various volume ratios, and its effect was discussed. Thermal conductivity of the consolidated materials was also examined, and its relation to porosity was elaborated.
This paper deals with the monitoring of laser consolidation process of ferrous based metal powder with high speed video camera. The melting process and solidifying process of metallic powder are observed in order to clarify the consolidation mechanism. The influences of layer thickness of the deposited powder on consolidation characteristics are investigated. Laser beam used is Yb:fiber laser with a spot diameter of 45μm and a maximum powder of 40W. A recording speed of high speed video camera is 10,000 fps. As a result, the aspect of consolidation process on powdered surface during laser beam irradiation was visualized