In foggy weather scenarios, the scattering and absorption of light by water droplets and particulate matter cause object features in images to become blurred or lost, presenting a significant challenge for target detection in autonomous driving vehicles. To address this issue, this study proposes a foggy weather detection method based on the YOLOv5s framework, named YOLOv5s-Fog. The model enhances the feature extraction and expression capabilities of YOLOv5s by introducing a novel target detection layer called SwinFocus. Additionally, the decoupled head is incorporated into the model, and the conventional non-maximum suppression method is replaced with Soft-NMS. The experimental results demonstrate that these improvements effectively enhance the detection performance for blurry objects and small targets in foggy weather conditions. Compared to the baseline model, YOLOv5s, YOLOv5s-Fog achieves a 5.4% increase in mAP on the RTTS dataset, reaching 73.4%. This method provides technical support for rapid and accurate target detection in adverse weather conditions, such as foggy weather, for autonomous driving vehicles.

The complex slip characteristics between the tracks and the terrain make it difficult to build an accurate model for intelligent tracked vehicles. Both the path planning and lateral control, however, are highly dependent on the accurate tracked vehicle model. To overcome the issue, a slip model based on the instantaneous centers of rotation (ICRs) of tracks and a dual-layer adaptive unscented Kalman filter (DAUKF) are used to estimate the ICR locations in real-time without requiring prior knowledge of terrain parameters. First, the historical trajectory information is used to estimate ICR locations by the upper-layer AUKF estimator preliminarily. The ICR locations estimated in the upper-layer and the current vehicle state are then imported into the model to predict the future trajectory which can be used to estimate the offset as compensation of preliminarily estimated ICR locations by the lower-layer AUKF estimator. The proposed DAUKF is verified by simulations on MATLAB/Simulink. In order to further verify the effectiveness and practicability of the algorithm, a large number of experiments under different terrains and road conditions are implemented on the electric-drive tracked vehicle. The simulation and experimental results illustrate that the proposed DAUKF can estimate the ICR locations efficiently and accurately, which can improve the accuracy of the tracked vehicle model compared with those of extended Kalman filter (EKF), UKF, and AUKF.

To better improve the ride comfort and handling stability of vehicles, a new two-stage ISD semi-active suspension structure is designed, which consists of the three elements, including an adjustable damper, spring, and inerter. Meanwhile, a new semi-active ISD suspension control strategy is proposed based on this structure. Firstly, the fuzzy neural network’s initial parameters are optimized using the grey wolf optimization algorithm. Then, the fuzzy neural network with the optimal parameters is adjusted to the PID parameters. Finally, a 1/4 2-degree-of-freedom ISD semi-active suspension model is constructed in Matlab/Simulink, and the dynamics simulation is carried out for the three schemes using PID control, fuzzy neural network PID control, and improved fuzzy neural network PID control, respectively. The results show that compared with adopting PID control and fuzzy neural network PID control strategy, the vehicle body acceleration and tire dynamic loads are significantly reduced after using the grey wolf optimized fuzzy neural network PID control strategy, which shows that the control strategy proposed in this paper can significantly improve the vehicle smoothness and the stability of the handling.

To improve the accuracy and robustness of bearing remaining useful life (RUL) prediction, this paper proposes a bearing RUL prediction method based on PELT state segmentation and time–frequency analysis, incorporating the Informer model for time-series modeling. First, the PELT (Pruned Exact Linear Time) algorithm is used to segment the vibration signals over the full life cycle of the bearing, accurately identifying critical degradation states and optimizing the stage division of the degradation process. Next, wavelet transform is applied to perform time–frequency analysis on the vibration signals, generating time–frequency spectrograms to comprehensively extract features in both the time and frequency domains. Finally, the extracted time–frequency features are used as input to predict the bearing RUL using the Informer model. As an efficient time-series prediction model, the Informer excels at handling long time series by leveraging a sparse self-attention mechanism to effectively capture the long-term dependencies in the signals. Experiments conducted on a publicly available dataset and comparisons with traditional methods demonstrate that the proposed method offers significant advantages in terms of prediction accuracy, computational efficiency, and robustness, making it more suitable for bearing health assessment and RUL prediction under complex working conditions.