Yanqiong Fei

Dr. Yanqiong Fei


Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2019 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
JWJiangbei Wang
Jiangbei Wang
YFYanqiong Fei
Yanqiong Fei
WPWu Pang
Wu Pang
This paper presents the design, modelling and testing of a soft pneumatic glove with five Segmented PneuNets Bending Actuators (SPBAs) made of elastomer, each actuator driving the corresponding finger to bend. The segmented structure of the actuator is designed according to the anatomy of human fingers, i.e. three flexible segments for finger joints and four inflexible segments for finger metacarpal and phalanges, which makes the actuator fit with finger better than those of homogenous structure. The number of inflatable chambers in the flexible segment can be designed according to Range of Motion (ROM) of the corresponding joint. To improve the air tightness of the actuator, an inner bladder is embedded into chambers. To predict the passive bending degree and grasping force of human fingers driven by the glove, a bottom-up model is constructed by using Yeoh's theory of hyperelasticity and Lagrange equations of serial robots. The model is verified by FEM simulations and experiments simultaneously. At last, some passive exercises are presented, which indicates its potential in hand rehabilitation.

1 February 2019 in Soft Robotics
Verified
Journal Article
Closed access
YFYanqiong Fei
Yanqiong Fei
JWJiangbei Wang
Jiangbei Wang
WPWu Pang
Wu Pang
This work presents the design and test of a novel fabric-based versatile and stiffness-tunable soft gripper integrating soft pneumatic fingers and wrist. The morphology is designed into a compact tuning fork shape (130 × 110 × 260 mm, 389 g) with two bidirectional sheet-shaped soft fingers and a biaxial bidirectional (universal) cylinder-shaped soft wrist. The multi-degree of freedom of soft fingers and wrist makes the gripper versatile and adaptable to gripping objects of various shapes, sizes, and orientations in a wide range. The bidirectional fingers with double-side inflatable chambers can tune their gripping stiffness and force by varying the common and differential pressure of the two sides. The wrist can tune its deflecting stiffness and force in the same way. Therefore, the gripper can grip objects of various stiffness and weights. The soft gripper is tested to characterize its workspace, stiffness, gripping force, and dynamic response time. Gripping function tests are also performed to evaluate the achieved degree of functions of the gripper. Tests show that the proposed gripper can grip objects in the size of 0–245 mm and in the orientation of −88.2°–90.8° (pitch/roll) with a maximum gripping force of 40 N and a response time of 1.22–1.60 s to force and 0.56–2.61 s to motion, respectively. The gripping stiffness can be tuned in the range of 0.029–0.137 N/mm (i.e., the tunable scope is 79%) by varying common pressure in the range of 0–0.2 MPa. Functional tests verify that the proposed soft gripper is versatile and adaptable to gripping objects of various shapes, sizes, weights, and orientations. Therefore, the proposed soft gripper has great potential applications in production and daily life.

12 October 2017 in Soft Robotics
Verified
Journal Article
Closed access
PWPang Wu
Pang Wu
WJWang Jiangbei
Wang Jiangbei
YFYanqiong Fei
Yanqiong Fei
This article presents the structure, design, and motion control of an inchworm inspired pneumatic soft robot, which can perform differential movement. This robot mainly consists of two columns of pneumatic multi-airbags (actuators), one sensor, one baseboard, front feet, and rear feet. According to the different inflation time of left and right actuators, the robot can perform both linear and turning movements. The actuators of this robot are composed of multiple airbags, and the design of the airbags is analyzed. To deal with the nonlinear performance of the soft robot, we use radial basis function neural networks to train the turning ability of this robot on three different surfaces and create a mathematical model among coefficient of friction, deflection angle, and inflation time. Then, we establish the closed-loop automatic control model using three-axis electronic compass sensor. Finally, the automatic control model is verified by linear and turning movement experiments. According to the experiment, the robot can finish the linear and turning movements under the closed-loop control system.

3 November 2017 in Journal of Intelligent & Robotic Systems
Verified
Journal Article
Closed access
PDF file
YZYuhang Zhu
Yuhang Zhu
YFYanqiong Fei
Yanqiong Fei
HXHongwei Xu
Hongwei Xu

1 April 2020 in Soft Robotics
Verified
Journal Article
Closed access
JWJiangbei Wang
Jiangbei Wang
YFYanqiong Fei
Yanqiong Fei
WCWeidong Chen
Weidong Chen
This article presents the system integration, sensing, and control of a novel modular soft-rigid pneumatic exoskeleton for lower limb. The proposed exoskeleton consists of three soft hinges (to drive the hip, knee, and ankle joints) and four rigid links (aligned with the waist, thigh, crus, and foot). Each soft hinge is made of and actuated by a customized bidirectional curl pneumatic artificial muscle (CPAM), whereas the links are three-dimensional printed. Each of the rigid links combined with its lower soft hinge (if any) is made into an independent soft-rigid module, that is, the waist-hip, thigh-knee, crus-ankle, and foot modules. With each of the modules are multiple sensors integrated, including two pressure sensors for detecting the inflating pressures, and two flex sensors and an inertia measurement unit for estimating the bending angles of the soft hinges via data fusion. Through a data-fitted angle–torque–pressure relationship of the CPAM, the actuation torque is estimated. An external electropneumatic control system is also developed. The double closed-loop control system consisting of pressure servos and position/torque controllers is designed to control the bending angles and actuation torques of the exoskeleton hinges. Experiment shows good motion controllability of the proposed exoskeleton in the range of motion of a gait cycle.

24 May 2016 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YFYanqiong Fei
Yanqiong Fei
HXHongwei Xu
Hongwei Xu
A soft robot with locomotive abilities controlled by body deformations is modeled, analyzed, and then constructed in this study. The robot is composed of a thin steel shell, four sensors, and four shape memory alloy (SMA) springs. Due to the force exerted by the SMAs, the thin steel shell deforms and causes the robot to roll and move forward continuously. The study is conducted in four tiers. Initially, after producing a model of the soft robot, the constraint conditions of rolling actions from deformations are analyzed. Then, the relationship between the deformation and the heating time of SMAs is studied. A dynamic analysis on the rolling motion is presented based on the deformation of SMAs and the change in the robot's center of gravity. A dynamic simulation is also conducted to test the feasibility of the theory. The third tier consists of designing a closed-loop controller based on feedback data from the four deformable sensors, a feature that has never been applied to soft robots in previous studies. Finally, a prototype of the soft robot is built, and an experiment is conducted and compared to prove the validity of the theory.