For this study, structural and manufacturing schemes for low-curvature pressurized fuselage panels were proposed, making it possible to provide high weight efficiency for the airframes of prospective civil blended wing-body (BWB) aircraft. The manufacturing scheme for low-curvature panels helped to achieve high strength characteristics of the composite details as well as decreased the labor input necessary for manufacturing and assembling. The beneficial features of the proposed structure are that the panels have a low weight, incur low manufacturing costs, and satisfy the demands of repairability.
27 June 2018 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
The concept of hybrid fuselage structure including conventional metal, conventional composite, and lattice composite sections is presented. The method of strength analysis and choosing the rational values of structure parameters of hybrid fuselage structure is presented. The weight efficiency of the presented fuselage structure is proven.
The paper considers a pro-bionic lattice shell (PBLS) for civil aviation structures and the problem of getting the parameters of a local low-velocity impact taking the value of residual strain by fiber optic sensors (FOS) installed in PBLS. There was developed a numerical model of an equivalent smooth shell with a detailed part as an impact zone. This detailed part have been constructed from a load-bearing rib containing layers of UD composite, matrix polymer, a protective tab and a skin. The matrix polymer layers and the protective tab had elastic-plastic properties, in the developed numerical model. The UD composite layers and the skin were orthotropic elastic media. FEM calculations showed that the location of FOS directly on the rib surface does not provide the required accuracy of getting impact residual strain. However, FOS installation into elastic-plastic protective tab makes solving the problem. Localized Bragg grating sensors must be installed into the FOS with a high density (every 1-2 cm along the rib) to indicate the impact location, which is technically difficult to implement. Distributed sensors (Brillouin scattering) have an advantage, allowing both to indicate the impact location by residual strain recording and to get possibility calculate later the most important parameter - the impact energy.
12 June 2025 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
The results of strength and weight efficiency analysis of composite fuselage sections with lattice structure layouts are presented. A rational nonregular layout of the lattice grid is proposed, which has an enhanced weight efficiency in comparison with the regular (periodic, along the length of the fuselage) one. The rational non-regular grid layout is formed by changing the geodesic direction of the spiral ribs with a constant angle of orientation to the longitudinal axis of the fuselage for a curvilinear direction of the spiral ribs. The validation of the proposed lattice grid layout was carried out using an automated parametric method for FEM strength analysis of lattice composite barrels. As objects of investigation, a number of barrels of an elongated fuselage structure of a perspective passenger aircraft were selected, having a diameter of 4m and lengths from 6 to 10 m. The weight effectiveness of the proposed layout was shown.
The simplified automated strength model of a fragment of composite laminate at microlevel based on the finite elements (FE) method is offered. The model allows investigating the growth of microcracks which arise in the resin in monolayers, orthogonal to a direction of external tensile force. On the basis of automated strength FE model of a fragment of composite laminate and the method of reduction of stiffness characteristics of the resin, the scenario of growth of primary destructions at the microlevel is offered and proved. The scenario is confirmed with experimental investigations of composite samples under tension with registration of acoustic emission. In the work, the dependences of decrease of strength characteristics of composite laminates are obtained as functions of characteristics of resin, angles of orientation of monolayers, volume ratio of fibres in a composite laminate.