Red mud (RM) is a by-product of extracting of alumina from bauxite. Red mud contains high quantities of alkali-generating minerals and metal ions, which can cause significant environmental damage. Many valuable components such as rare-earth elements, Al, and Fe, in RM are difficult to be utilized owing to their particle size and alkalinity. Thus, developing an economical and efficient technology to consume a large amount of RM can efficiently solve RM disposal issues. This paper systematically reviews the comprehensive utilization methods for reducing RM environmental pollution and divides the comprehensive utilization of RM into three aspects: the effective extraction of valuable components, resource transformation, and environmental application. Based on resource, economic, and environmental benefits, the development of new technologies and new processes with market competitiveness, environmental protection, and ecological balance should be the prerequisite for the low-energy, low-pollution, low-cost, and high-efficiency comprehensive utilization of RM. The direction of future research to solve RM disposal issues is also suggested.

Red mud (RM) is an industrial waste produced in large amounts during alumina extraction from bauxite. Its disposal generates serious environmental pollution due to high alkalinity. Therefore, a strategy for the effective utilization of RM must be developed. For instance, RM may be transformed into useful products, such as adsorbents. Given its high concentrations of aluminum oxides, iron oxides, titanium oxides, silica oxides, and hydroxides, RM may be developed as a cheap adsorbent for the removal of various ions from aqueous solution and soils (e.g., metal and non-metal ions, phenolic compounds, and dyes) and waste gas purification (sulfide and carbide). This review summarizes the background, properties, and applications of RM as an adsorbent. Proper approaches of removing metal and non-metal elements from wastewater are also systematically reviewed and compared. Emphasis is placed on the surface modification of RM to obtain high adsorption. Finally, the scope for future research in this area for RM is discussed in depth.

F-containing wastewater does great harm to human health and the ecological environment and thus needs to be treated efficiently. In this paper, the new calcium-containing precipitant calcite and aided precipitant fluorite were adopted to purify F-containing wastewater. Relevant reaction conditions, such as reaction time, oscillation rate, dosage of hydrochloric acid, calcite dosage and the assisting sedimentation performance of fluorite, and action mechanism are analyzed. The experiment showed that the removal rate of fluoride in simulated wastewater reached 96.20%, when the reaction time, the dosage of calcite, the dosage of 5% dilute hydrochloric acid, and the oscillation rate was 30 min, 2 g/L, 21.76 g/L, and 160 r/min, respectively. Moreover, the removal rate of fluoride in the actual F-containing smelting wastewater reaches approximately 95% under the optimum condition of calcite dosage of 12 g/L, reaction time of 30 min, and oscillation rate of 160 r/min. The addition of fluorite significantly improves the sedimentation performance of the reactive precipitates. The experimental results showed that calcite and fluorite can effectively reduce the concentration of fluoride ions in F-containing wastewater and solve the problem of slow sedimentation of reactive precipitates.

The increasing demand for rare earth elements (REEs), especially from new and innovative technology, has strained their supply, which makes the exploration of new REE sources necessary, for example, the recovery of REEs from phsophogypsum (PG). PG is a byproduct during the wet production of phosphoric acid, which is an attractive secondary resource for REEs due to a large amount of REEs locked in them. In most cases, REEs contained in PG are mainly encapsulated in the gypsum crystal, leading to a low leaching efficiency. Therefore, it is particularly important to use various methods to enhance the leaching of REEs from PG. In this review, we summarized and classified various enhanced leaching methods for the recovery of REEs from PG, and the advantages and disadvantages of different methods were compared. A joint method of recrystallization and RIL may be a promising enhanced leaching approach for the recovery of REEs from PG. Recrystallization could achieve both the complete REE release and simultaneous preparation of industrial materials with high value added, such as high-strength α-hemihydrate gypsum by phase transformation of PG, and the RIL technology could adsorb the releasing REEs and realize their efficient extraction. Such a combination appears to show significant advantages because of high REE recovery, as well as high value-added product preparation at low cost.