Apart from many limitations, the usage of hydrogen in different day-to-day applications have been increasing drastically in recent years. However, numerous techniques available to produce hydrogen, electrolysis of water is one of the simplest and cost-effective hydrogen production techniques. In this method, water is split into hydrogen and oxygen by using external electric current. In this research, a novel hydrogen production system incorporated with Photovoltaic – Thermal (PVT) solar collector is developed. The influence of different parameters like solar collector tilt angle, thermal collector design and type of heat transfer fluid on the performance of PVT system and hydrogen production system are also discussed. Finally, thermal efficiency, electrical efficiency, and hydrogen production rate have been predicted by using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique. Based on this study results, it can be inferred that the solar collector tilt angle plays a significant role to improve the performance of the electrical and thermal performance of PVT solar system and Hydrogen yield rate. On the other side, the spiral-shaped thermal collector with water exhibited better end result than the other hydrogen production systems. The predicted results ANFIS techniques represent an excellent agreement with the experimental results. In consequence, it is suggested that the developed ANFIS model can be adopted for further studies to predict the performance of the hydrogen production system.
The battery temperature is one of the important factor that affects the performance of the battery and lifetime. To overcome these issues, the need and usage of an effective battery thermal management system (BTMS) is increased in recent years. The results of BTMS with conventional heat transfer fluids appears in many articles but the very few researchers developed and studied the performance of refrigerant based BTMS. In this research, a novel BTMS is developed and detailed study is conducted to analyze the impact of CuO based refrigerant (R134a) on its performance. Different quantity of CuO nanoparticles mixed with base refrigerant (R134a) and used as a heat transfer fluid. Initially, five different volume proportions (i.e. ɸ – 0.01, 0.02, 0.03, 0.04 and 0.05%) of CuO-R134a nano refrigerants are prepared and the thermophysical properties are studied. The test results reveal that the peak thermal conductivity and viscosity of about 1.28 W/mK and 0.00047 Pa-S is obtained for refrigerant with 0.05 vol.% CuO nanoparticle at 325 K and 300 K respectively. The average cell temperature of about 51 °C, 37 °C, 33 °C and 32 °C is observed for battery without cooling system, BTMS with R134a, 0.01% and 0.05% CuO/R134a respectively. From the results of this study, it can be suggested that the CuO- R134a nano refrigerant will be a promising cooling medium in the battery cooling system.
In this research, the effects of sonication time and volume concentration of cupric oxide (CuO)/water nanofluids on the thermal conductivity, viscosity and performance of photovoltaic–thermal (PVT) solar collector are investigated experimentally. Pure water, 0.05, 0.1 and 0.2% volume concentrations of CuO/water nanofluids prepared with 1, 2, 3 and 4 h sonication time are used as the heat transfer fluids in this study. The experimental results show that the thermal conductivity and viscosity of nanofluids are the functions of sonication time and volume concentration and using a 0.2 vol.% nanofluid prepared with 4 h sonication time, the thermal conductivity and viscosity were enhanced up to 3.5 and 7.5%, respectively, with respect to the base fluid, whereas for the same volume concentration and sonication time, the observed thermal and electrical efficiencies of the PVT solar collector are 80.7 and 15.1%, respectively, at 12 noon. It was observed that the highest total efficiency of the PVT solar collector of about 95.8% was obtained for 0.2% CuO/water nanofluid and 4 h sonication time at 12 noon.
This article reports the effects of CuO/water based coolant on specific fuel consumption and exhaust emissions of four stroke single cylinder diesel engine. The CuO nanoparticles of 27 nm were used to prepare the nanofluid-based engine coolant. Three different volume concentrations (i.e 0.05%, 0.1%, and 0.2%) of CuO/water nanofluids were prepared by using two-step method. The purpose of this study is to investigate the exhaust emissions (NOx), exhaust gas temperature and specific fuel consumption under different load conditions with CuO/water nanofluid. After a series of experiments, it was observed that the CuO/water nanofluids, even at low volume concentrations, have a significant influence on exhaust emissions. The experimental results revealed that, at full load condition, the specific fuel consumption was reduced by 8.6%, 15.1% and 21.1% for the addition of 0.05%, 0.1% and 0.2% CuO nanoparticles with water, respectively. Also, the emission tests were concluded that 881 ppm, 853 ppm and 833 ppm of NOx emissions were observed at high load with 0.05%, 0.1% and 0.2% volume concentrations of CuO/water nanofluids, respectively.