The main objective of the study was to examine accuracies of DEMs (Digital Elevation Models) with different topographical structures generated by using the Unmanned Aerial Vehicle (UAV) point clouds. Two different terrains with flat and sloping topographical structures were selected for the study, and DEMs of these terrains were generated using eight interpolation techniques (Kriging, Natural Neighbor, Radial Basis Function Triangulation with Linear interpolation, Nearest Neighbor, Invers Distance to a Power, Local Polynomial and Minimum Curvature). The accuracies of DEMs were tested by calculating the statistic methods with the help of the control points obtained by land surveying techniques. At the end of the study, it was observed that in DEMs prepared for both flat (study area 1) and sloping (study area 2) terrains, Kriging interpolation method yields the best results as study area 1 and 2, respectively. In addition, the results were examined using Shapiro-Wilk and ANOVA:Friedman tests. After observing with the Shapiro-Wilk test that the data has a normal distribution, it was statistically determined through the parametric ANOVA: Friedman test that there is no difference between the variables.
The selection of emergency assembly points within the urban area holds significant importance for ensuring swift and effective intervention in the aftermath of a potential disaster until temporary shelter areas are prepared. In both historical and instrumental periods, Erzincan (Türkiye) has experienced major earthquakes resulting in significant loss of life and property. The likelihood of similar earthquakes occurring in Erzincan in the future remains high. Therefore, it is necessary to identify safe areas where people can assemble after an earthquake, moving away from hazardous zones. The aim of this study is to analyse the capacities and adequacies of emergency assembly points, which constitute a step in disaster management and enhance the earthquake resilience of the city, using Geographic Information Systems (GIS) based on selected criteria (accessibility, spatial distribution, proximity to healthcare facilities, size, capacity adequacy, and proximity to fault avoidance zones), and to propose solutions. The assessment revealed that the available assembly points are not homogeneously distributed throughout the city and are inadequate to meet the available building and population density. Therefore, in addition to the available 38 emergency assembly points, 67 new alternative emergency assembly points have been identified. The proposed emergency assembly points (in the 75–100% range) increased the number of neighborhoods within the 250 m service area by 43.75% and 42.5% for 500 m.The findings underscore the necessity for more comprehensive and effective planning for Erzincan in the event of a potential disaster or emergency.
This study aims to increase the accuracy of the object based classification approach to differentiate the spectrally similar land cover types to create thematic maps depicting the current land use status in rangeland. Firstly, the multispectral and panchromatic bands of a WorldView-2 MS and Pan images are fused. The fused WV-2 image is then classified with object based approach using Support Vector Machines (SVMs) classifier (Method 1). The overall classification accuracy for Method 1 is found to be 88.6%. Secondly, UAV ortho-image is utilised for segmentation process, which is required for the object based SVM classification of the WV-2 MS image (Method 2). The overall classification accuracy for Method 2 is obtained as 92.4%. It is realised that the Method 2 increases the object based classification accuracy by 4%, compared to Method 1. This result reveals that the object based classification of the UAV and WV-2 MS images makes significant contribution to the classification accuracy.
The present work aimed to develop a prediction model to estimate geoid undulation and to compare its efficiency with other methods including radial basis function neural network (RBFNN), generalized regression neural network (GRNN), multiple linear regression (MLR) and, ten different interpolation methods. In this study, the k-fold cross-validation method was used to evaluate the model and its behavior on the independent dataset. With this validation method, each of a k number of groups has the chance to be divided into training and testing data. The performances of the methods were evaluated in terms of the root mean square error (RMSE) mean absolute error (MAE), Nash–Sutcliffe efficiency coefficient (NSE), and correlation coefficient (R2) and using graphical indicators. The evaluation of the performance of the datasets obtained using cross-validation was done in two ways. If we accept the method having the minimum error result as the most appropriate method, the natural neighbor (NN) method in the DS#5 dataset gave better results than the other methods (RMSE=0.14173 m, MAE=0.09729 m, NSE=0.98986, and R2=0.99011. On the other hand, it has been observed that, the GRNN method exhibited the best performance, on average, with RMSE=0.18539 m, MAE=0.13676 m, NSE=0.98229, and R2=0.98249.
Turkish National Permanent GNSS Network-Active ( TNPGN-Active) Project serves their users with a total of 158 permanent stations, including the Turkish Republic of Northern Cyprus and Turkey. The movements caused by earthquakes can be determined effectively with this GNSS network. It was thought that the earthquakes, occurred on the Eastern Anatolian Fault Zone (DAFZ) on April 04, 2019 (5.2 MW), December 27, 2019 (4.8 MW) and January 24, 2020 (6.5 MW), affected TNPGN-Active stations located in neighbouring provinces close to this fault zone. In this context, a local GNSS network (ADY1, ARPK, BING, DIYB, ELAZ, ERGN, MALY, SIV1 and TNCE) were created from existing TNPGN-Active points and the movements of the stations in the network are periodically examined. theta(2) Criteria and IWST (Iterative Weighted Similarity Transformation), which were geodetic static deformation models, were used to determine movement amounts and directions. As a result of the evaluation, it was determined that both methods gave similar results. The largest movement was determined at the ELAZ station between the periods of January 03, 2019 and January 25, 2020 in the horizontal direction about 5.5 cm (southwest) and in the vertical direction about 3 cm (up). It was also determined that other TNPGN-Active stations were affected by the earthquake of 6.5 MW in particular on January 24, 2020 and there were movements in these stations up to 1-2 cm in horizontal direction.