Street dust has been sampled from six different types of land use of the city of Murcia (Spain). The samples were fractionated into eleven particle size fractions (<2, 2–10, 10–20, 20–50, 50–75, 75–106, 106–150, 150–180, 180–425, 425–850 μm and 850–2000 μm) and analyzed for Pb, Cu, Zn and Cd. The concentrations of these four potentially toxic metals were assessed, as well as the effect of particle size on their distribution. A severe enrichment of all metals was observed for all land-uses (industrial, suburban, urban and highways), with the concentration of all metals affected by the type of land-use. Coarse and fine particles in all cases showed concentrations of metals higher than those found in undisturbed areas. However, the results indicated a preferential partitioning of metals in fine particle size fractions in all cases, following a logarithmic distribution. The accumulation in the fine fractions was higher when the metals had an anthropogenic origin. The strong overrepresentation of metals in particles <10 μm indicates that if the finest fractions are removed by a vacuum-assisted dry sweeper or a regenerative-air sweeper the risk of metal dispersion and its consequent risk for humans will be highly reduced. Therefore, we recommend that risk assessment programs include monitoring of metal concentrations in dust where each land-use is separately evaluated. The finest particle fractions should be examined explicitly in order to apply the most efficient measures for reducing the risk of inhalation and ingestion of dust for humans and risk for the environment.

Mining activity has an adverse impact on the surrounding ecosystem, especially via the release of potentially toxic elements (PTEs); therefore, there is an urgent need to develop efficient technologies to remediate these ecosystems, especially soils. Phytoremediation can be potentially used to remediate contaminated areas by potentially toxic elements. However, in soils affected by polymetallic contamination, including metals, metalloids, and rare earth elements (REEs), it is necessary to evaluate the behavior of these toxic elements in the soil-plant system, which will allow the selection of the most appropriate native plants with phytoremediation potential to be used in phytoremediation programs. This study was conducted to evaluate the level of contamination of 29 metal(loid)s and REEs in two natural soils and four native plant species (Salsola oppositifolia, Stipa tenacissima, Piptatherum miliaceum, and Artemisia herba-alba) growing in the vicinity of a Pb-(Ag)-Zn mine and asses their phytoextraction and phytostabilization potential. The results indicated that very high soil contamination was found for Zn, Fe, Al, Pb, Cd, As, Se, and Th, considerable to moderate contamination for Cu, Sb, Cs, Ge Ni, Cr, and Co, and low contamination for Rb, V, Sr, Zr, Sn, Y, Bi and U in the study area, dependent of sampling place. Available fraction of PTEs and REEs in comparison to total concentration showed a wide range from 0% for Sn to more than 10% for Pb, Cd, and Mn. Soil properties such as pH, electrical conductivity, and clay content affect the total, available, and water-soluble concentrations of different PTEs and REEs. The results obtained from plant analysis showed that the concentration of PTEs in shoots could be at a toxicity level (Zn, Pb, and Cr), lower than toxic but more than sufficient or natural concentration accepted in plants (Cd, Ni, and Cu) or at an acceptable level (e.g., V, As, Co, and Mn). Accumulation of PTEs and REEs in plants and the translocation from root to shoot varied between plant species and sampling soils. A. herba-alba is the least efficient plant in the phytoremediation process; P. miliaceum was a good candidate for phytostabilization of Pb, Cd, Cu, V, and As, and S. oppositifolia for phytoextraction of Zn, Cd, Mn, and Mo. All plant species except A. herba-alba could be potential candidates for phytostabilization of REEs, while none of the plant species has the potential to be used in the phytoextraction of REEs.

Water scarcity in arid and semiarid regions poses problems for agricultural systems, awakening special interest in the development of deficit irrigation strategies to improve water conservation. Toward this purpose, farmers and technicians must monitor soil water and soluble nutrient contents in real time using simple, rapid and economical techniques through time and space. Thus, this study aimed to achieve the following: (i) create a model that predicts water and soluble nutrient contents in soil profiles using electrical resistivity tomography (ERT); and (ii) apply the model to different woody crops under different irrigation regimes (full irrigation and regulated deficit irrigation (RDI)) to assess the efficiency of the model. Simple nonlinear regression analysis was carried out on water content and on different ion contents using electrical resistivity data as the dependent variable. A predictive model for soil water content was calibrated and validated with the datasets based on exponential decay of a three-parameter equation. Nonetheless, no accurate model was achieved to predict any soluble nutrient. Electrical resistivity images were replaced by soil water images after application of the predictive model for all studied crops. They showed that under RDI situations, soil profiles became drier at depth while plant roots seemed to uptake more water, contributing to reductions in soil water content by the creation of desiccation bulbs. Therefore, the use of ERT combined with application of the validated predictive model could be a sustainable strategy to monitor soil water evolution in soil profiles under irrigated fields, facilitating land irrigation management.

The legacy of the mining industry has left a large number of tailing ponds in the Cartagena–La Unión mining district exposed to water and wind erosion, which causes serious environmental and health problems and requires remediation. Before applying any remediation technique, an intensive sampling of the materials infilling the pond is required to determine the geochemistry of the pond, which will condition the remediation process. However, sampling the large number of tailing ponds that compose the district could be expensive. Thus, the main objective of this study is to evaluate the usefulness of electrical resistivity tomography (ERT) as a non-invasive tool to provide an image of spatial subsurface resistivity distribution and its relation to the physicochemical composition of near-surface mine wastes. To achieve this objective, three short ERT profiles were conducted, and 12 samples in each profile were collected at different depths for its geochemical characterization. Several non-linear regression models were fitted to predict physicochemical properties and metal concentrations from electrical resistivity measures. As a result, a high resistivity area was depicted in the ERT profiles G2 and G3, while the low resistivity ERT profile G1 was also obtained in accordance with the site’s surficial characteristics. Relationships among low resistivity values and high salinity, clay content, high metal concentrations, and mobility were established. Specifically, calibrated models were obtained for electrical conductivity, particle sizes of 0.02–50 µm and 50–2000 µm, total Zn and Cd concentration, and bioavailable Ni, Cd, and Fe. The ERT technique was shown to be a useful tool for the approximation of the location and distribution of the highest ranges of fine particle sizes, moisture, and, to a lesser extent, metal accumulation in the near-surface waste materials.

This study presents the results of the geoenvironmental characterization of La Matildes riverbed, affected by mine tailings in the Cartagena–La Unión district, Murcia (southeast Spain). Soils and riverbeds in this area are highly polluted. Two Electrical Resistivity Imaging (ERI) profiles were carried out to obtain information about the thickness of the deposits and their internal structure. For the mine tailings deposits of La Murla, a tributary of the El Miedo riverbed, the geophysical method imaged two different units: the upper one characterized by low resistivity values and 5–8 m thickness, correlated with the mine tailings deposits; and the lower more resistive unit corresponding to the Paleozoic metasediments bedrock. The ERI profile transverse to the Las Matildes dry riverbed revealed the existence of three different units. The uppermost one has the lowest resistivity values and corresponds to the tailings deposits discharged to the riverbeds. An intermediate unit, with intermediate resistivity values, corresponds to the riverbed sediments before the mining operations. The lower unit is more resistive and corresponds to the bedrock. Significant amounts of pyrite, sphalerite, and galena were found both in tailings and riverbed sediments. The geochemical composition of borehole samples from the riverbed materials shows significantly high contents of As, Cd, Cu, Fe, Pb, and Zn being released to the environment. Mining works have modified the natural landscape near La Unión town. Surface extraction in three open-pit mines have changed the summits of Sierra de Cartagena–La Unión. Rock and metallurgical wastes have altered the drainage pattern and buried the headwaters of ephemeral channels. The environmental hazards require remediation to minimize the environmental impact on the Mar Menor coastal lagoon, one of the most touristic areas in SE Spain.