The complexity of the gas transport mechanism in microfractures and nanopores is caused by the feature of multiscale and multiphysics. Figuring out the flow mechanism is of great significance for the efficient development of shale gas. In this paper, an apparent permeability model which covers continue, slip, transition, and molecular flow and geomechanical effect was presented. Additionally, a mathematical model comprising multiscale, geomechanics, and adsorption phenomenon was proposed to characterize gas flow in the shale reservoir. The aim of this paper is to investigate some important impacts in the process of gas transportation, which includes the shale stress sensitivity, adsorption phenomenon, and reservoir porosity. The results reveal that the performance of the multistage fractured horizontal well is strongly influenced by stress sensitivity coefficient. The cumulative gas production will decrease sharply when the shale gas reservoir stress sensitivity coefficient increases. In addition, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity; however, the effect of adsorption is very weak in the early gas transport period, and the impact of later will increase. Moreover, shale porosity also greatly affects the shale gas transportation.
Hydraulic fracture is a key technology for high-efficiency development of shale gas, and the flow mechanism of fractured well with Stimulated Reservoir Volume (SRV) is complex in shale gas. In this paper, an apparent permeability model is proposed, which can not only reflect the multi-scale flow characteristics in shale gas but also characterize the variation of permeability with effective stress. In addition, a composite model for a fractured well with SRV is established, which comprises multiscale, geomechanics and adsorption phenomenon. The object of this paper is to investigate some important impacts on a fractured well with SRV. The results reveal that the cumulative gas production will decrease sharply when the shale gas reservoir stress-sensitive coefficient increases. Additionally, the gas production rate and cumulative gas production will increase with the increase of SRV permeability. And, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity, the larger Langmuir volume, the richer adsorption gas content in shale gas. And, more adsorbed gas will be exploited into free gas, which slows down the production decline of gas wells. The production of gas well will increase with the increase of perforation thickness of gas reservoir.
The mass transfer from the matrix to the fracture face is driven by both concentration and pressure differences. In this work, high-temperature high-pressure (HPHT) systems for diffusion experiments with only concentration differences were used to determine the diffusion coefficient, and flow experiments with only pressure differences were also conducted; and the magnitude of gas molecular diffusion and its contribution to production were analyzed in this study. The results show as follows: (1) Gas flow from the matrix to the fracture system is driven by the combined effect of gas molecular diffusion and seepage. The pore structure characteristics of the reservoir and the contribution of the diffusion to the yield can vary greatly. (2) In tight reservoirs with an average permeability of 0.3067 mD, the contribution of gas molecular diffusion to the total gas mass flux is only 0.08%, while in shale reservoirs, the average permeability is 0.0015 mD; the contribution of diffusion to the total gas mass flux could be as large as 1%. (3) The contribution of molecular diffusion to gas production is closely related to the pore sizes of the porous medium. The smaller the pore sizes are, the greater the contribution of molecular diffusion to gas production.
With low porosity and low permeability, shale reservoirs cannot be mined economically without large-scale hydraulic fracturing operation. However, abundant fracturing fluid will enter the reservoirs during the process of fracture. Nevertheless, there have not been specific research findings on the imbibition law of Fuling shale gas reservoir in China. In this study, an imbibition experiment was carried out on the shale core of Jiaoshiba block of Fuling shale gas reservoir to learn spontaneous imbibition characteristic of Fuling shale gas reservoir. Based on the experimental results, the imbibition process of Fuling shale gas reservoir fracturing fluid is divided into two stages. During the first stage, i.e., the former 30 hours, imbibition velocity is high, with the cumulative imbibition occupying more than 70% of the total imbibition; during the second stage, i.e., the latter 30 hours, the imbibition velocity substantially drops towards balance. There is a typical power function relationship between the average imbibition velocity and imbibition time, and this function relationship runs throughout the whole imbibition process. Nonetheless, the imbibition process of shale core cannot be described directly by the Handy equation. The imbibition velocity is closely related to clay mineral content and pore structure characteristics of shale core. The higher the clay mineral content, the higher the imbibition velocity. According to the relationship between the average imbibition velocity and imbibition time, we derived the estimation equation of fracture area formed by fractured shale gas well to estimate the fracture scale formed by shale gas well fracturing.
To improve the seismic design of steel frame structures, the empirical formula for evaluation of fundamental periods of steel frame structures was investigated and a new formula was presented in the paper. A total number of 36 moment resisting steel frame structures were selected for the statistical analysis, and all the structures obtained seismic response records during past earthquakes. The fundamental periods of all structures before damaged were identified by using ARX method, and the new empirical formula for fundamental period of steel frame structure was obtained through nonlinear least square regression. The result shows that the fundamental period of steel frame structure can be expressed in terms of the height to the power of 0.6 and multiplied by the modified factor 0.12. The proposed empirical formula can be referenced for the seismic design code revision, steel frame structures seismic design and related researches.