Gbeminiyi Musibau

Dr. Gbeminiyi Musibau


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2017 in Alexandria Engineering Journal
Verified
Journal Article
Open access
GMGbeminiyi Musibau
Gbeminiyi Musibau
In this study, analysis of heat transfer in a longitudinal rectangular fin with temperature-dependent thermal conductivity and internal heat generation was carried out using finite difference method. The developed systems of non-linear equations that resulted from the discretization using finite difference scheme were solved with the aid of MATLAB using fsolve. The numerical solution was validated with the exact solution for the linear problem. The developed heat transfer models were used to investigate the effects of thermo-geometric parameters, coefficient of heat transfer and thermal conductivity (non-linear) parameters on the temperature distribution, heat transfer and thermal performance of the longitudinal rectangular fin. From the results, it shows that the fin temperature distribution, the total heat transfer, and the fin efficiency are significantly affected by the thermo-geometric parameters of the fin. Also, for the solution to be thermally stable, the fin thermo-geometric parameter must not exceed a specific value. However, it was established that the increase in temperature-dependent properties and internal heat generation values increases the thermal stability range of the thermo-geometric parameter. The results obtained in this analysis serve as basis for comparison of any other method of analysis of the problem

18 October 2018 in Journal of Energy
Verified
Journal Article
Open access
PDF file
GMGbeminiyi Musibau
Gbeminiyi Musibau
SOSunday J. Ojolo
Sunday J. Ojolo
Nigeria has not been able to provide enough electric power to her about 200 million people. The last effort by the federal government to generate 6000 MW power by the end of 2009 failed. Even with the available less than 6000 MW of electricity generated in the country, only about 40% of the population have access to the electricity from the National Grid, out of which, urban centers have more than 80% accessibility while rural areas, which constitute about 70% of the total population, have less than 20% of accessibility to electricity. This paper addresses the possibility of meeting the energy demand in Nigeria through biomass gasification technology. The techno-economic analysis of biomass energy is demonstrated and the advantages of the biomass gasification technology are presented. Following the technical analysis, Nigeria is projected to have total potential of biomass of about 5.5 EJ in 2020 which has been forecast to increase to about 29.8 EJ by 2050. Based on a planned selling price of $0.727/kWh, the net present value of the project was found to be positive, the cost benefit ratio is greater than 1, and the payback period of the project is 10.14 years. These economic indicators established the economic viability of the project at the given cost. However, economic analysis shows a selling price of $0.727/kWh. Therefore, the capital investment cost, operation and maintenance cost, and fuel cost can be reduced through the development of the gasification system using local materials, purposeful and efficient plantation of biomass for the energy generation, giving out of financial incentives by the government to the investors, and locating the power plant very close to the source of feedstock generation.

3 September 2018 in International Journal of Chemical Engineering
Verified
Journal Article
Open access
PDF file
GMGbeminiyi Musibau
Gbeminiyi Musibau
The influences of thermal radiation and nanoparticles on free convection flow and heat transfer of Casson nanofluids over a vertical plate are investigated. The governing systems of nonlinear partial differential equations of the flow and heat transfer processes are converted to systems of nonlinear ordinary differential equations through similarity transformations. The resulting systems of fully coupled nonlinear ordinary differential equations are solved using the differential transformation method with Padé-approximant technique. The accuracies of the developed analytical methods are verified by comparing their results with the results of past works as presented in the literature. Thereafter, the analytical solutions are used to investigate the effects of thermal radiation, Prandtl number, nanoparticle volume fraction, shape, and type on the flow and heat transfer behaviour of various nanofluids over the flat plate. It is observed that both the velocity and temperature of the nanofluid as well as the viscous and thermal boundary layers increase with increase in the thermal radiation parameter. The velocity of the nanofluid decreases and the temperature of the nanofluid increase, respectively, as the Prandtl number and volume fraction of the nanoparticles in the base fluid increase. The decrease in velocity and increase in temperature are highest in lamina-shaped nanoparticle and followed by platelet-, cylinder-, brick-, and sphere-shaped nanoparticles, respectively. Using a common base fluid to all the nanoparticle types, it is established that the decrease in velocity and increase in temperature are highest in TiO2 and followed by CuO, Al2O3, and SWCNT nanoparticles, in that order. It is hoped that the present study will enhance the understanding of free convection boundary layer problems of Casson fluid under the influences of thermal radiation and nanoparticles as applied in various engineering processes.

27 March 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
George OguntalaGeorge Oguntala
George Oguntala
GMGbeminiyi Musibau
Gbeminiyi Musibau
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
JNJames M. Noras
James M. Noras
The ever-increasing demand for high performance electronic and computer systems has unequivocally called for increased microprocessor performance. However, increasing microprocessor performance requires increasing the power and on-chip power density of the microprocessor, both of which are associated with increased heat dissipation. In recent times, thermal management of electronic systems has gained intense research attention due to increased miniaturization trend in the electronics industry. In the paper, we present a numerical study on the performance of a convective-radiative porous heat sink with functionally graded material for improved cooling of various consumer electronics. For the theoretical investigation, the thermal property of the functionally graded material is assumed as a linear and power-law function. We solved the developed thermal models using the Chebyshev spectral collocation method. The effects of inhomogeneity index of FGM, convective and radiative parameters on the thermal behaviour of the porous heat sink are investigated. The present study shows that increase in the inhomogeneity index of FGM, convective and radiative parameter improves the thermal efficiency of the porous fin heat sink. Moreover, for all values of Nc and Rd, the temperature gradient along the fin of FGM is negligible compared to HM fin in both linear and power-law functions. For comparison, the thermal predictions made in the present study using Chebyshev spectral collocation method agrees excellently with the established results of Runge-Kutta with shooting and homotopy analytical method.

3 June 2018 in Modelling and Simulation in Engineering
Verified
Journal Article
Open access
PDF file
GMGbeminiyi Musibau
Gbeminiyi Musibau
AAA. T. Akinshilo
A. T. Akinshilo
AYA. A. Yinusa
A. A. Yinusa
The various applications of squeezing flow between two parallel surfaces such as those that are evident in manufacturing industries, polymer processing, compression, power transmission, lubricating system, food processing, and cooling amongst others call for further study on the effects of various parameters on the flow phenomena. In the present study, effects of nanoparticle geometry, slip, and temperature jump conditions on thermo-magneto-solutal squeezing flow of nanofluid between two parallel disks embedded in a porous medium are investigated, analyzed, and discussed. Similarity variables are used to transform the developed governing systems of nonlinear partial differential equations to systems of nonlinear ordinary differential equations. Homotopy perturbation method is used to solve the systems of the nonlinear ordinary differential equations. In order to verify the accuracy of the developed analytical solutions, the results of the homotopy perturbation method are compared with the results of the numerical method using the shooting method coupled with the fourth-order Runge–Kutta, and good agreements are established. Through the approximate analytical solutions, parametric studies are carried out to investigate the effects of nanoparticle size and shape, Brownian motion parameter, nanoparticle parameter, thermophoresis parameter, Hartmann number, Lewis number and pressure gradient parameters, slip, and temperature jump boundary conditions on thermo-solutal and hydromagnetic behavior of the nanofluid. This study will enhance and advance the understanding of nanofluidics such as energy conservation, friction reduction, and micromixing of biological samples.

14 February 2019 in Modelling and Simulation in Engineering
Verified
Journal Article
Open access
PDF file
GMGbeminiyi Musibau
Gbeminiyi Musibau
George OguntalaGeorge Oguntala
George Oguntala
AYA. A. Yinusa
A. A. Yinusa
Nonlinear transient thermal analysis of a convective-radiative fin with functionally graded materials (FGMs) under the influence of magnetic field is presented in this study. The developed nonlinear thermal models of linear, quadratic, and exponential variation of thermal conductivity are solved approximately and analytically using the differential transformation method (DTM). In order to verify the accuracies of the nonlinear solutions, exact analytical solutions are also developed with the aids of Bessel, Legendre, and modified Bessel functions. Good agreements are established between the exact and the approximate analytical solutions. In the parametric studies, effects of heat enhancement capacity of fin with functionally graded material as compared to fin with homogeneous material are investigated. Also, influence of the Lorentz force and radiative heat transfer on the thermal performance of the fin are analyzed. From the results, it is shown that increase in radiative and magnetic field parameters as well as the in-homogeneity index improve the thermal performance of the fin. Also, the transient responses reveal that the FGM fin with quadratic-law and exponential-law function shows the slowest and fasted thermal responses, respectively. This study will provide a very good platform for the design and optimization of an improved heat transfer enhancement in thermal systems, where the surrounding fluid is influenced by a magnetic field.