Footwear production is subject to the variability inherent in any process, and producers often need to apply tools that allow them to make the right decisions. This work documents the process to optimize the buffer allocation in a shoe manufacturing line minimizing the cycle time in the system, applying a metamodeling approach. It was found that the Front sewing operation, and the interaction between the Lining sewing operation and the assembly operation have the greatest effect on the flow time of the product within the process; the optimum assignment of spaces follows a non-uniform arrangement on the line saturating the slower stations; the cycle time follows a non-linear behavior vs. the total number of spaces (N) in the line. For a certain value of N, the cycle time reaches a minimum value.

The correct management of operations in thermoelectric plants is based on the continuous evaluation of the structural integrity of its components, among which there are elements made of stainless steel that perform water conduction functions at elevated temperatures. The working conditions generate progressive wear that must be monitored from the perspective of the microstructure of the material. When AISI 304 stainless steel is subjected to a temperature range between 450 and 850 °C, it is susceptible to intergranular corrosion. This phenomenon, known as sensitization, causes the material to lose strength and generates different patterns in its microstructure. This research analyzes three different patterns present in the microstructure of stainless steel, which manifest themselves through the following characteristics: the absence of intergranular corrosion, the presence of intergranular corrosion, and the precipitation of chromium carbides. This article shows the development of a methodology capable of recognizing the corrosion patterns generated in stainless steel with an accuracy of 98%, through the integration of a multilayer perceptron neural network and the following digital image processing methods: phase congruence and a gray-level co-occurrence matrix. In this way, an automatic procedure for the analysis of the intergranular corrosion present in AISI 304 stainless steel using artificial intelligence is proposed.

Purpose: The buffer allocation problem (BAP) arises in the design of production systems; it involves analyzing and defining the optimal distribution of buffers within a production line. This paper presents a BAP formulation in a parallel series line from a cup sublimation process with unreliable operating conditions. The main objective of this study is to develop a new BAP solution proposal, considering the optimization of the OEE indicator used in Lean Manufacturing.Design/methodology/approach: The BAP was analyzed under an optimization approach from two different criteria: firstly, the maximization of the OEE indicator (Overall Equipment Effectiveness) utilized in Lean Manufacturing, as well as the maximization of the average production rate (Throughput). The case study involves unreliable operating conditions. Process times, and timeframes between failures and repairs, consider normal distribution functions. The evaluation method employed in the study includes the use of simulation meta-models built from experiment designs and production line simulations; on the other hand, the nonlinear GRG algorithm is used to solve the mathematical models.Findings: In the study carried out, it is shown that the OEE indicator can be affected when more buffers are allocated than necessary, hence it is important to calculate and establish the best configuration for them through an analysis such as the one proposed in this document.Research limitations/implications: The research is limited to a case study of an unreliable production line from a cup sublimation process.Practical implications: The proposed solution established in this study can be used in other production lines with configurations different from the one analyzed, considering the optimization criterion of the OEE indicator. Originality/value: Seeking that the allocation of buffers within the production line improves the OEE indicator is something new in the literature, therefore, the results achieved in this research become even more relevant.