Although Visible Light Communication (VLC) is gaining increasing attention in research, developing a practical VLC system to harness its immediate benefits using Commercial Off-The-Shelf (COTS) devices is still an open issue. To this end, we develop and deploy CeilingTalk as a lightweight wireless broadcast system using COTS LED luminaries as transmitters and smartphone cameras as receivers so that it can be fully hosted in a smartphone and is feasible for all possible indoor environments. CeilingTalk innovates in both encoding and decoding to achieve an adequate throughput for realistic applications. On one hand, it employs Raptor coding to allow multiple LED luminaries to transmit collaboratively so as to benefit both throughput and reliability. On the other hand, it involves a lightweight decoding scheme to handle the asynchrony (both spatial and temporal) in transmissions. Moreover, we analyze the impact of various parameters on the performance of CeilingTalk, in order to derive a model for such VLC systems enabled by COTS devices and hence provide general guidance for future VLC deployments in larger scales. Finally, we conduct extensive field experiments to validate the effectiveness of our LED-camera VLC model, as well as to demonstrate the promising performance of CeilingTalk: up to 1.0 kb/s at a distance of 5 m.
8 November 2018 in IEEE Wireless Communications Letters
As a key component of building management and security, occupancy inference through smart sensing has attracted a lot of research attentions for nearly two decades. Nevertheless, existing solutions mostly rely on either pre-deployed infrastructures or user device participation, thus hampering their wide adoption. This paper presents CeilingSee, a dedicated occupancy inference system free of heavy infrastructure deployments and user involvements. Building upon existing LED lighting systems, CeilingSee converts part of the ceiling-mounted LED luminaires to act as sensors, sensing the variances in diffuse reflection caused by occupants. In realizing CeilingSee, we first re-design the LED driver to leverage LED's photoelectric effect so as to transform a light emitter to a light sensor. In order to produce accurate occupancy inference, we then engineer efficient learning algorithms to fuse sensing information gathered by multiple LED luminaires. We build a testbed covering a 30m2 office area; extensive experiments show that CeilingSee is able to achieve very high accuracy in occupancy inference.
16 November 2020 in IEEE Transactions on Mobile Computing
In this paper, we study the employment of multiple Unmanned Aerial Vehicles (UAVs) to monitor Points of Interests (PoIs) in a disaster area, e.g., collapsed buildings after an earthquake, where the UAVs can take photos and videos for the people trapped at PoIs, because such valuable information is imperative to make rescue decisions. Unlike most existing studies that ignored the monitoring time of PoIs and simply minimized the longest flying distance among the UAVs, we observe that it takes time to monitor the PoIs. Then, it is possible that the flying distance of a UAV in its flying tour may not be too long, the tour however contains many densely-located PoIs. Therefore, it will take a very long time for the UAV to monitor the PoIs in its tour. In this paper, we first formulate a problem of finding flying tours for $K$ given UAVs to collaboratively monitor PoIs in a disaster area, such that the maximum spent time of the $K$ UAVs among their tours is minimized, where the spent time of a UAV in its tour consists of the flying time and the PoI monitoring time. We then propose a novel $5\frac{1}{3}$ -approximation algorithm for the problem, improving the best approximation ratio 6 so far for the problem of minimizing the longest flying distance among the UAVs. In addition, we extend the proposed algorithm to the case that each UAV may not be able to monitor all PoIs assigned to it, due to its limited maximum flying time (e.g., 30 minutes), and the UAV must return to its depot to replace its battery. We finally evaluate the performance of the proposed algorithms via simulation environments, and experimental results show that the proposed algorithms are very promising. Especially, the maximum spent times of the $K$ UAVs in their tours by the proposed algorithms are up to 30 percent shorter than those by existing algorithms. In addition, the empirical approximation ratios of the proposed algorithms are no more than 2.4, which are much smaller than their theoretical approximation ratios that are at least $5\frac{1}{3}$ .
In this paper, a 3D indoor visible light positioning (VLP) system with fast computation time using received signal strength (RSS) is proposed and experimentally demonstrated. Assisted by the deep learning techniques, the complexity of the trilateration problem is greatly reduced, and the trilateration problem can be formulated as a linear mapping leading to faster position estimation than the conventional estimation. Moreover, a new method of off-line preparation is adopted to minimize the workload of the VLP system deployment for more practical usage. The proposition is implemented on an atto-cellular VLP unit, through which the real-time performance and positioning accuracy are demonstrated and validated in a 3D positioning experiment performed in a space of 1.2 × 1.2 × 2 m 3 . The experimental results show that a positioning accuracy of 11.93 cm in confidence of 90% is achieved with 50 times faster the computation time compared to the conventional scheme.