The sliding electric contact that is established between the catenary wire and pantograph slider serves as the primary mechanism through which contemporary high-speed railway trains obtain their driving energy. The wear resistance of both the sliders and contact wires significantly influences their service life. This paper reports an experimental investigation into the electrical tribological characteristics of a copper–silver alloy contact wire in conjunction with a novel pure carbon slider, conducted under AC 300–500 A at sliding velocities ranging from 150 to 250 km/h. The experimental tests reveal that the coefficient of friction changes from 0.20 to 0.28, and the wear rate of the sliders varies from 0.0028 to 0.0147 g/km. The observed wear mechanisms for the slider encompass arc ablation, abrasive wear, delamination wear, and adhesive wear.

With the rapid development of high-speed railways, the dynamic performance of the pantograph–catenary system plays a crucial role in ensuring the safe and stable operation of trains. This study investigates the effect of the structural parameters of the pantograph–catenary system to achieve good dynamic interaction performance under high-speed conditions. A finite element model of the catenary system, incorporating nonlinear cable and truss elements, and a lumped mass model of the pantograph are developed. The penalty function method is employed to simulate the pantograph–catenary interaction. A total of 2187 dynamic simulations are performed, with seven variables—pantograph parameters, span length, contact wire tension, messenger wire tension, number of droppers, stitch wire length, and stitch wire tension. The comprehensive effect of these parameters is evaluated based on dynamic performance indicators, such as pantograph–catenary contact force, pantograph head lift, and support point lift. The results indicate that increasing the number of droppers, contact wire tension, and messenger wire tension enhances dynamic performance, while an increase in span length negatively affects performance. Stitch wire tension has little to no effect.