Zusammenfassung: Die Hüftendoprothetik weist hervorragende Langzeitergebnisse mit geringen Revisionsraten auf. Doch ein jünger werdendes sportliches Patientenkollektiv mit hohen Ansprüchen an das Kunstgelenk führt zu erhöhten materialspezifischen Anforderungen. Die Reibung zwischen den Gleitpartnern in einem künstlichen Hüftgelenk stellt einen relevanten Faktor dar, der über die Lebensdauer der Endoprothese entscheiden kann. Ziel ist es, die Reibung so gering wie möglich zu halten, damit keine zu hohe Belastung im Implantat-Knochen-Interface vorherrscht, da diese zu einer Lockerung des künstlichen Hüftgelenks führen kann. Die Reibung im Hüftgelenk ist multifaktoriell, wobei patienten-, implantat- und operationsspezifische Faktoren Einfluss darauf nehmen. Daher ist es von hoher Relevanz für die endoprothetische Forschung, die auftretende Reibung unter anderem bei verschiedenen Implantationswinkeln, Patientenaktivitäten und Materialkombinationen zu untersuchen. Durch In-vivo-Untersuchungen können Reibungsuntersuchungen direkt im Patienten unter realen Bedingungen vorgenommen werden. Einzelne Einflussfaktoren können hingegen optimal in In-vitro-Simulationen untersucht werden, da hier mögliche Kofaktoren konstant gehalten werden. Nachfolgend werden die verschiedenen Ansätze zur Messung der Reibung sowie die bisherigen Ergebnisse aus der Literatur zusammengefasst. Zudem werden die Vor- und Nachteile der verschiedenen Messmethoden aufgeführt und ein Ausblick auf die Möglichkeit der Kombination von In-vivo- und In-vitro-Reibungsuntersuchungen gegeben, um die Versorgung der Patienten weiter zu optimieren.
Background/Objectives: Tibial plateau fractures (TPF) are complex intra-articular injuries requiring accurate reduction and stable fixation; inadequate planning can prolong recovery and increase osteoarthritis risk. Although CT-based 3D reconstructions are routine, automated 3D identification and separation of individual fracture fragments is uncommon. We evaluated a PACS-integrated AI workflow for automated 3D segmentation of intact bones, fracture detection, and fracture-fragment delineation. Methods: This single-center retrospective study analyzed preoperative TPF CT scans acquired on 64- and 128-slice scanners. Femur, patella, tibia, fibula, and fracture components were manually segmented in Visage 7 by a radiologist (9 years of experience) and an orthopedic surgeon (4 years). Segmentations were exported as NIfTI and used to train a 3D nnU-Net model with default preprocessing and parameters on 20 annotated TPF cases using a two-phase training strategy (initial training followed by retraining with refined labels). The trained model was integrated into Visage 7 and executed via an interactive PACS button for fully automated segmentation. Two independent readers rated outputs on a five-point Likert scale for intact bone segmentation, fracture detection, and fragment delineation; inter-reader association was assessed using Spearman and Kendall correlations. Results: In 108 fully rated cases, intact bone segmentation scored very high (means 4.67/4.72; median 5) and fracture detection was good (means 4.15/4.20; median 4). In contrast, individual fracture-fragment differentiation was limited (means 2.64/2.75; median 2). Inter-reader association was very high (Spearman r 0.943–0.967; Kendall’s tau-b 0.875–0.971; all p < 0.001). Greater fracture complexity was associated with poorer fracture-fragment differentiation. Discussion: A PACS-integrated AI workflow can reliably segment intact bones and detect TPF within routine imaging, supporting rapid 3D visualization for surgical planning. However, robust separation of individual fracture fragments remains the primary limitation, motivating larger and more diverse training datasets and continued model refinement.
Introduction: Tibial plateau fractures present a complex orthopaedic challenge and usually require surgical intervention to restore joint alignment and stability as well as to prevent complications. In practice, determining the most appropriate surgical approach, implant selection and positioning remains a challenge and depends on the surgeon’s experience and patient-specific factors. Therefore, this scoping review aims to map the current evidence on surgical fixation methods for proximal tibia fractures in adults. In particular, we seek to first assess study types and their distribution across levels of evidence and second to identify knowledge gaps to support evidence-based surgical planning. Methods and analysis: The proposed scoping review will be conducted in accordance with the JBI methodology for scoping reviews and will be reported as per the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews. Information for this study will be gathered from Medline, Cochrane and Embase. Data analysis will involve categorising the studies by their level of evidence and extracting predefined parameters, including fracture characteristics, surgical approach, implant type and key findings relevant to the review question. The study focuses on surgically stabilised intra-articular proximal tibia fractures in adults. Only English- and German-language studies that are available in full text and published after 1995 will be included. Ethics and dissemination: No ethical approval is required. The findings of the proposed review will be disseminated through publications in peer-reviewed journals. Review registration: Open Science Framework, osf.io/g9zfu.