Jing-Shan Zhao

Dr. Jing-Shan Zhao

Department of Mechanical Engineering, Tsinghua University, Beijing 100085, China
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2013 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
XLXiang Liu
Xiang Liu
ZFZhi-Jing Feng
Zhi-Jing Feng
JDJian S Dai
Jian S Dai
This article focuses on the synthesis of a steering mechanism that exactly meets the requirements of Ackermann steering geometry. It starts from reviewing of the four-bar linkage, then discusses the number of points that a common four-bar linkage could precisely trace at most. After pointing out the limits of a four-bar steering mechanism, this article investigates the turning geometry for steering wheels and proposes a steering mechanism with incomplete noncircular gears for vehicle by transforming the Ackermann criteria into the mechanism synthesis. The pitch curves, addendum curves, dedendum curves, tooth profiles and transition curves of the noncircular gears are formulated and designed. Kinematic simulations are executed to demonstrate the target of design.

3 June 2023 in Nature Communications
Verified
Journal Article
Open access
PDF file
JZJiayue Zhang
Jiayue Zhang
YGYikui Gao
Yikui Gao
DLDi Liu
Di Liu
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
JWJie Wang
Jie Wang
Direct-current triboelectric nanogenerators arising from electrostatic breakdown can eliminate the bottleneck problem of air breakdown in conventional triboelectric nanogenerators, offering critical benefits of constant-current output, resistance to electromagnetic interference, and high output power density. Previous understanding is that its output characteristics are described by a capacitor-breakdown model or dictated by one or two discharge domains in direct-current triboelectric nanogenerators. Here, we demonstrate that the former holds only for ideal conditions and the latter cannot fully explain the dynamic process and output performance. We systematically image, define, and regulate three discharge domains in direct-current triboelectric nanogenerators, then a “cask model” is developed to bridge the cascaded-capacitor-breakdown dynamic model in ideal conditions and real outputs. Under its guidance, the output power is increased by an order of magnitude within a wide range of resistive loads. These unexplored discharge domains and optimization methods revolutionize the output performance and potential applications of direct-current triboelectric nanogenerators.

1 July 2022 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
LKLukas Kilian
Lukas Kilian
Farzeen ShahidFarzeen Shahid
Farzeen Shahid
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
CNChristian Navid Nayeri
Christian Navid Nayeri
Bioinspired morphing wings are part of a novel research direction offering greatly increased adaptability for use in unmanned aerial vehicles. Recent models published in the literature often rely on simplifications of the bird wing apparatus and fail to preserve many of the macroscopic morphological features. Therefore, a more holistic design approach could uncover further benefits of truly bioinspired bird wing models. With this issue in mind, a prototype inspired by crow wings (Corvus genus) is developed, which is capable of planform wing morphing. The prototype imitates the feather structure of real birds and replicates the folding motion with a carbon fiber reinforced polymer skeleton with one controllable degree of freedom. The mechanism supplies a smooth airfoil lifting surface through a continuous morphing motion between a fully extended and a folded state. When extended, it has an elliptic planform and emarginated slots between primary remiges. In the folded state, the wingspan is reduced by 50% with a 40% reduction in surface area and the aspect ratio decreases from 2.9 to 1.2. Experimental data from a subsonic wind tunnel investigation is presented for flow velocities ranging from 5 to 20 m s−1, corresponding to Reynolds numbers between 0.7 × 105–2.8 × 105. The wing is analyzed in the three static states (folded, intermediate, and extended) through aerodynamic coefficients and flow visualizations along the surface. The bioinspired design enables the wing to capture several phenomena found on real bird wings. Through its morphing capabilities and intrinsic softness, the wing can sustain large angles of attack with greatly delayed stall and maintain optimal performance at different velocities.

1 September 2010 in Mechanism and Machine Theory
Verified
Journal Article
Closed access
JWJian-Yi Wang
Jian-Yi Wang
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
FCFu-Lei Chu
Fu-Lei Chu
ZFZhi-Jing Feng
Zhi-Jing Feng

16 April 2008 in Journal of Mechanical Design
Verified
Journal Article
Closed access
PDF file
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
FCFulei Chu
Fulei Chu
ZFZhi-Jing Feng
Zhi-Jing Feng
This paper proposes a synthesis method for rectilinear motion generating spatial mechanism with application to automotive suspension. First, it presents a generic process to synthesize the kinematic chains of a mechanism with the prescribed mobility, and then it deduces the construction criteria of feasible kinematic chains for such a mechanism. The most outstanding advantages of the rectilinear motion generating spatial mechanism used as the independent automotive suspension are that the orientation and position parameters such as kingpin, caster, camber, axis distance, and wheel track are always maintained constant during jounce and rebound. These ideal characteristics are guaranteed by the particular rigid guidance mechanism whose end effector only has one translation along an exact straight line.

1 February 2012 in Journal of Mechanisms and Robotics
Verified
Journal Article
Closed access
PDF file
Jing-Shan ZhaoJing-Shan Zhao
Jing-Shan Zhao
JWJian-Yi Wang
Jian-Yi Wang
FCFulei Chu
Fulei Chu
ZFZhi-Jing Feng
Zhi-Jing Feng
JDJian S. Dai
Jian S. Dai
This paper proposes a foldable stair that is easily deployed for use and folded for storage. It consists of a number of identical deployable scissor-like elements which form the staircases when expanded. In addition to use, the folded stair can be used for hanging clothes and acting as a decoration. The mechanism of the stair is first synthesized in line with the common stairs between two horizontal levels. The actuating mechanism is then synthesized in accordance with two extreme positions of the stair, folded, and unfolded. Because the stair can be folded after use, it is convenient in use and will witness a wide application both indoors and outdoors where there is no enough space for a fixed stair. In addition, this deployable stair is also particularly useful in evacuating people from a building when the disasters such as earthquakes occur.