The paper broadly addresses how Industry 4.0 program drivers will impact maintenance in aviation. Specifically, Industry 4.0 practices most suitable to aeronautical maintenance are selected, and a detailed exposure is provided. Advantages and open issues are widely discussed and case studies dealing with realistic scenarios are illustrated to support what has been proposed by authors. The attention has been oriented towards Augmented Reality and Additive Manufacturing technologies, which can support maintenance tasks and spare parts production, respectively. The intention is to demonstrate that Augmented Reality and Additive Manufacturing are viable tools in aviation maintenance, and while a strong effort is necessary to develop an appropriate regulatory framework, mandatory before the wide-spread introduction of these technologies in the aerospace systems maintenance process, there has been a great interest and pull from the industry sector. Highlights Industry 4.0 practices most suitable to aeronautical maintenance are selected. Advantages and open issues are widely discussed and case studies are illustrated. Augmented Reality can support maintenance tasks. Additive Manufacturing can be useful to produce spare parts. A strong effort is necessary to develop an appropriate aeronautical regulatory framework.

Technology evolution and wide research attention on 3D printing efficiency and processes have given the prompt need to reach an understanding about each technique’s prowess to deliver superior quality levels whilst showing an economical and process viability to become mainstream. Studies in the field have struggled to predict the singularities that arise during most Fused Deposition Modeling (FDM) practices; therefore, diverse individual description of the parameters have been performed, but a relationship study between them has not yet assessed. The proposed study lays the main defects caused by a selection of printing parameters which might vary layer slicing, then influencing the defect rate. Subsequently, the chosen technique for optimization is presented, with evidence of its application viability that suggests that a quality advance would be gathered with such. The results would help in making the FDM process become a reliable process that could also be used for industry manufacturing besides prototyping purposes.

Augmented Reality (AR) is worldwide recognized as one of the leading technologies of the 21st century and one of the pillars of the new industrial revolution envisaged by the Industry 4.0 international program. Several papers describe, in detail, specific applications of Augmented Reality developed to test its potentiality in a variety of fields. However, there is a lack of sources detailing the current limits of this technology in the event of its introduction in a real working environment where everyday tasks could be carried out by operators using an AR-based approach. A literature analysis to detect AR strength and weakness has been carried out, and a set of case studies has been implemented by authors to find the limits of current AR technologies in industrial applications outside the laboratory-protected environment. The outcome of this paper is that, even though Augmented Reality is a well-consolidated computer graphic technique in research applications, several improvements both from a software and hardware point of view should be introduced before its introduction in industrial operations. The originality of this paper lies in the detection of guidelines to improve the Augmented Reality potentialities in factories and industries.

This paper presents the application of a low-cost 3D printing technology in pre-operative planning and intra-operative decision-making. Starting from Computed Tomography (CT) scans, we were able to reconstruct a 3D model of the area of interest with a very simple and rapid workflow, using open-source software and an entry level 3D printer. The use of High Temperature Poly-Lactic Acid (HTPLA) by ProtoPasta allowed fabricating sterilizable models, which could be used within the surgical field. We believe that our method is an appealing alternative to high-end commercial products, being superior for cost and speed of production. It could be advantageous especially for small and less affluent hospitals that could produce customized sterilizable tools with little investment and high versatility.

The topology optimization methodology is widely applied in industrial engineering to design lightweight and efficient components. Despite that, many techniques based on structural optimization return a digital model that is far from being directly manufactured, mainly because of surface noise given by spikes and peaks on the component. For this reason, mesh post-processing is needed. Surface smoothing is one of the numerical procedures that can be applied to a triangulated mesh file to return a more appealing geometry. In literature, there are many smoothing algorithms available, but especially those based on the modification of vertex position suffer from high mesh shrinkage and loss of important geometry features like holes and surface planarity. For these reasons, an improved vertex-based algorithm based on Vollmer’s surface smoothing has been developed and introduced in this work along with two case studies included to evaluate its performances compared with existent algorithms. The innovative approach herein developed contains some sub-routines to mitigate the issues of common algorithms, and confirms to be efficient and useful in a real-life industrial context. Thanks to the developed functions able to recognize the geometry feature to be frozen during the smoothing process, the user’s intervention is not required to guide the procedure to get proper results.

Today’s market drives companies to change, adapt, and compete. Many consumers are increasingly looking at price, without sacrificing quality. In order to be attractive to the customer, companies must be able to offer the required quality at the lowest possible price. The life cycle of many products has been shortened compared to the past because now technologies are evolving faster. For these reasons, it is important that companies reevaluate all the operations that are carried out within them, to optimize them and eventually adopt new technologies if they offer interesting opportunities. In this discussion, we first study the design for disassembly, a technique that can bring several advantages during the life cycle of a component, offering the possibility of reducing time and cost of disassembling a product, and better reuse of the different materials of which it is composed. Subsequently, augmented reality is discussed, and how this technology is exploited in the world, especially in the industrial sector. During the work, we discuss a case study, with the gearbox being the object of analysis. This allows us to apply the theoretical concepts illustrated in a concrete way, allowing for a better understanding of the topics.