The rapid advancement in highway building has rendered classic emulsion asphalt insufficient to meet the strict demands of modern asphalt pavement applications. Consequently, modified emulsion asphalts have emerged as a pivotal focus in emulsion asphalt research. This study elucidates the modification mechanisms employed by various modifiers on emulsion asphalt, thoroughly investigates and systematically organizes the preparation procedures and fundamental properties of each modified emulsion asphalt, and culminates in a comprehensive summary of its practical application scenarios. Based on an extensive literature review, this study presents optimal modification methodologies and preparation schemes for various types of modified emulsion asphalt, establishes specific usage scenarios, and offers theoretical guidance to enhance its performance and expand its scope of application.
The discrete element is an important tool for vibration compaction simulation from the microscopic viewpoint. The irregular particle model was established by the disc filling method, and the linear contact model with anti-rolling was selected to reflect the contact characteristics between the particles, so as to establish the simulation model of subgrade vibratory compaction. Based on this model, the stress characteristics of the area below the center of the vibrating wheel and the surface area of the soil were studied, and the principle of vibratory compaction was discussed. The results show that the distribution of vertical stresses below the center of drum basically presents a decreasing trend in the depth range during vibration, with the stress amplitude of the lower structure increasing and the stress magnitude of the upper structure decreasing. The distribution of horizontal stresses in the area below the center of the vibrating wheel is similar to the stress distribution in the splitting test. The soil at the surface has an obvious pushing and squeezing effect, and the transmission distance of horizontal stresses is larger than that of vertical stresses. The soil at the surface is pushed and the horizontal stresses are transmitted at a greater distance than the vertical stresses, which, together with a certain degree of shear effect, causes a certain uplift deformation of the soil around the vibrating wheel. In general, the vibration compaction process is relatively consistent with the theory of repeated loading and the theory of alternating shear strain.
Multimodal wind disturbances complicate quadrotor trajectory tracking through partial observability and shifts in disturbance distributions. To address these challenges, this study develops hierarchically structured distributionally robust proximal policy optimization (HSDR-PPO), integrating observation history with separate Kullback–Leibler constraints on wind-class probabilities and within-class disturbance distributions. The resulting adversarial probabilities weight policy updates while rollout collection maintains fixed candidate coverage, enabling history-conditioned robust control without wind measurements or scenario labels. Simulations using a Crazyflie 2X model with prescribed external forces cover five training seeds and eight test groups. HSDR-PPO achieves the lowest mean episode cost and mean physical failure rate, reducing cost by 13.0–19.2% relative to the best baseline in each group. Under intensity-matched colored-disturbance shifts, worst-decile cost decreases by 32.9% relative to Joint-KL PPO. Ablations support contributions from observation history and hierarchical reweighting, while evaluations under unseen chirps, a figure-eight reference, and an extended task duration demonstrate transfer without retraining. A policy trained in simulation configured for the experimental platform is subsequently deployed on a physical quadrotor, achieving a three-dimensional position root mean square error of 0.071 m in a representative 48 s outdoor flight. These results demonstrate improved robustness under the evaluated simulation conditions and successful deployment for outdoor trajectory tracking.