The aim of the current study is to investigate torsional vibrations of bi-directional functionally graded (FG) small-scale tubes. The size effect is captured using the modified couple stress theory (MCST). Through-the-thickness distribution profile of material properties are characterized by employing a power-law function, which incorporates a gradation index,beta, and longitudinal varation in material properties is featured by an exponential function which employs a gradient parameter,alpha. Similar to other material properties, continuous spatial variation of the length scale parameter is also incorporated into the analysis of two-dimensionally FG tubes. The model, including governing equations of motion and boundary conditions, is developed through the utilization of Hamilton's principle. By employing differential quadrature method (DQM) numerical results regarding torsional vibrations are provided. Accuracy of the proposed model and procedures are verified through verification comparisons made to limiting cases available in the literature. Numerical results reveal effects of various material and geometric parameters on natural frequencies and indicate that torsional free vibration characteristics of small-sized tubes are sensitive to distribution profile of constituents, geometric aspect ratios and effective length scale parameter. Results also demonstrate that length scale parameter variation has significant influence on natural frequencies which justifies the necessity of its consideration in analyses.
This study aims to characterize the twisting behavior of bi-directional functionally graded (FG) micro-tubes under torsional loads within the modified couple stress theory framework. The two material properties involved in the torsional static model of FG small-scale tubes, i.e., shear modulus and material length scale parameter, are assumed to possess smooth spatial variations in both radial and axial directions. Through the utilization of Hamilton’s principle, the governing equations and boundary conditions are derived, and then, the system of partial differential equations is numerically solved by using the differential quadrature method. A verification study is conducted by comparing limiting cases with the analytical results available in the literature to check the validity of the developed procedures. A detailed study is carried out on the influences of the phase distribution profile and geometric parameters upon twist angles and shear stresses developed in FG micro-tubes undergoing external distributed torques.