Se Woon Choi

Dr. Se Woon Choi


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2013 in Energies
Verified
Journal Article
Open access
PDF file
HPHyo Seon Park
Hyo Seon Park
BKBongkeun Kwon
Bongkeun Kwon
YSYunah Shin
Yunah Shin
YKYousok Kim
Yousok Kim
Taehoon HongTaehoon Hong
Taehoon Hong
SCSe Woon Choi
Se Woon Choi
The construction industry is a representative industry that consumes large amounts of energy and produces substantial pollution. The operation of a building accounts for a large portion of its total CO2 emissions. Most efforts are focused on improving the energy efficiency related to the operation of a building. The relative importance of the energy and CO2 emissions from the construction materials increases with the increasing number of low-energy buildings. To minimize the life-cycle energy use of a building, the energy consumed from both materials in the construction phase as well as the energy consumed from the operation of the building must be reduced. In this study, an optimal design method for composite columns in high-rise buildings using a genetic algorithm is proposed to reduce cost and CO2 emissions from the structural materials in the construction phase. The proposed optimal method minimizes the total cost, including the additional cost calculated based on CO2 emissions from composite columns, while satisfying the structural design criteria and constructability conditions. The proposed optimal method is applied to an actual 35-story building, and the effective use of structural materials for the sustainable design of composite columns is investigated. It is shown that using more concrete than steel section and using high-strength materials are economically and environmentally effective methods.

26 November 2013 in Sensors
Verified
Journal Article
Open access
PDF file
DHDae Woong Ha
Dae Woong Ha
HPHyo Seon Park
Hyo Seon Park
SCSe Woon Choi
Se Woon Choi
YKYousok Kim
Yousok Kim
This paper proposes a wireless inclinometer sensor node for structural health monitoring (SHM) that can be applied to civil engineering and building structures subjected to various loadings. The inclinometer used in this study employs a method for calculating the tilt based on the difference between the static acceleration and the acceleration due to gravity, using a micro-electro-mechanical system (MEMS)-based accelerometer. A wireless sensor node was developed through which tilt measurement data are wirelessly transmitted to a monitoring server. This node consists of a slave node that uses a short-distance wireless communication system (RF 2.4 GHz) and a master node that uses a long-distance telecommunication system (code division multiple access—CDMA). The communication distance limitation, which is recognized as an important issue in wireless monitoring systems, has been resolved via these two wireless communication components. The reliability of the proposed wireless inclinometer sensor node was verified experimentally by comparing the values measured by the inclinometer and subsequently transferred to the monitoring server via wired and wireless transfer methods to permit a performance evaluation of the wireless communication sensor nodes. The experimental results indicated that the two systems (wired and wireless transfer systems) yielded almost identical values at a tilt angle greater than 1°, and a uniform difference was observed at a tilt angle less than 0.42° (approximately 0.0032° corresponding to 0.76% of the tilt angle, 0.42°) regardless of the tilt size. This result was deemed to be within the allowable range of measurement error in SHM. Thus, the wireless transfer system proposed in this study was experimentally verified for practical application in a structural health monitoring system.

15 July 2013 in Sensors
Verified
Journal Article
Open access
PDF file
HPHyo Seon Park
Hyo Seon Park
YSYunah Shin
Yunah Shin
SCSe Woon Choi
Se Woon Choi
YKYousok Kim
Yousok Kim
In this study, a practical and integrative SHM system was developed and applied to a large-scale irregular building under construction, where many challenging issues exist. In the proposed sensor network, customized energy-efficient wireless sensing units (sensor nodes, repeater nodes, and master nodes) were employed and comprehensive communications from the sensor node to the remote monitoring server were conducted through wireless communications. The long-term (13-month) monitoring results recorded from a large number of sensors (75 vibrating wire strain gauges, 10 inclinometers, and three laser displacement sensors) indicated that the construction event exhibiting the largest influence on structural behavior was the removal of bents that were temporarily installed to support the free end of the cantilevered members during their construction. The safety of each member could be confirmed based on the quantitative evaluation of each response. Furthermore, it was also confirmed that the relation between these responses (i.e., deflection, strain, and inclination) can provide information about the global behavior of structures induced from specific events. Analysis of the measurement results demonstrates the proposed sensor network system is capable of automatic and real-time monitoring and can be applied and utilized for both the safety evaluation and precise implementation of buildings under construction.

16 December 2013 in Sensors
Verified
Journal Article
Open access
PDF file
HPHyo Seon Park
Hyo Seon Park
HLHwan Young Lee
Hwan Young Lee
SCSe Woon Choi
Se Woon Choi
YKYousok Kim
Yousok Kim
Sensor technologies have been actively employed in structural health monitoring (SHM) to evaluate structural safety. To provide stable and real-time monitoring, a practical wireless sensor network system (WSNS) based on vibrating wire strain gauges (VWSGs) is proposed and applied to a building under construction. In this WSNS, the data measured from each VWSG are transmitted to the sensor node via a signal line and then transmitted to the master node through a short-range wireless communication module (operating on the Industrial, Scientific, and Medical (ISM) band). The master node also employs a long-range wireless communication module (Code Division Multiple Access—CDMA) to transmit the received data from the sensor node to a server located in a remote area, which enables a manager to examine the measured data in real time without any time or location restrictions. In this study, a total of 48 VWSGs, 14 sensor nodes, and seven master nodes were implemented to measure long-term strain variations of mega-trusses in an irregular large-scale building under construction. Based on strain data collected over a 16-month period, a quantitative evaluation of the construction process was performed to determine the aspects that exhibit the greatest influence on member behavior and to conduct a comparison with numerical simulation results. The effect of temperature stress on the structural elements was also analyzed. From these observations, the feasibility of a long-term WSNS based on VWSGs to evaluate the structural safety of an irregular building under construction was confirmed.

13 September 2013 in Sensors
Verified
Journal Article
Open access
PDF file
HPHyo Seon Park
Hyo Seon Park
JKJi Young Kim
Ji Young Kim
JKJin Gi Kim
Jin Gi Kim
SCSe Woon Choi
Se Woon Choi
YKYousok Kim
Yousok Kim
Considering the characteristics of wind tunnel tests, a position measurement system that can minimize the effects on the flow of simulated wind must be established. In this study, a motion-capture camera was used to measure the displacement responses of structures in a wind tunnel test, and the applicability of the system was tested. A motion-capture system (MCS) could output 3D coordinates using two-dimensional image coordinates obtained from the camera. Furthermore, this remote sensing system had some flexibility regarding lab installation because of its ability to measure at relatively long distances from the target structures. In this study, we performed wind tunnel tests on a pylon specimen and compared the measured responses of the MCS with the displacements measured with a laser displacement sensor (LDS). The results of the comparison revealed that the time-history displacement measurements from the MCS slightly exceeded those of the LDS. In addition, we confirmed the measuring reliability of the MCS by identifying the dynamic properties (natural frequency, damping ratio, and mode shape) of the test specimen using system identification methods (frequency domain decomposition, FDD). By comparing the mode shape obtained using the aforementioned methods with that obtained using the LDS, we also confirmed that the MCS could construct a more accurate mode shape (bending-deflection mode shape) with the 3D measurements.

30 September 2013 in Sensors
Verified
Journal Article
Open access
PDF file
HPHyo Seon Park
Hyo Seon Park
JKJong Moon Kim
Jong Moon Kim
SCSe Woon Choi
Se Woon Choi
YKYousok Kim
Yousok Kim
This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM). The proposed measurement system consists of a laser displacement sensor (LDS) and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA) communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.