The presence of iron impurity in feldspar lowers its commercial value due to imparting unwanted colors to the final products. This study concerns the dissolution of iron from an Iranian feldspar using oxalic acid as the leaching agent. In this regard, initial tests were conducted to fix primary parameters at the best values: pH, 2; agitation rate, 1000 rpm; particle size, −150 µm, and to find the suitable range of acid concentration. Then, using a central composite experimental design, the optimum condition (85% iron removal) was obtained at 70°C, 5% pulp density, 20 g/l oxalic acid, and time of 90 min. The iron dissolution kinetics was investigated within 40–80°C and showed a reasonable match with the shrinking core model with a mixed control mechanism. The activation energy was calculated as 28.61 kJ/mol at 80°C. Two- and three-stage leaching experiments were also performed using a baffled reactor at different pulp densities of 5–25%. Iron removal at the highest pulp density was improved from 36% at the first to about 72% at the third stage that indicates oxalic acid leaching can be industrially implemented as an efficient method for removing iron from feldspars.
Differential flocculation acts based upon the difference in the settling rates of two minerals. So, the application of the bacterial cells, spent medium, extracellular protein, and polysaccharide derived from a cell-free extract of Bacillus licheniformis were investigated to remove hematite and goethite from kaolin and quartz. The zeta potentials and settling behaviors of the minerals in the presence and absence of the bioflocculants at various pH values were explored. The adsorption density of each bioflocculant on the minerals was measured and compared relatively, for various pH settings, while the adsorption isotherm of each bioreagent was determined at the neutral pH, as well. Polysaccharide presented the best settling differences at pH 7 that were 66.7%, 58.4%, 53.7%, and 45.4% for the hematite-quartz, goethite-quartz, hematite-kaolin, and goethite-kaolin pairs, respectively. It showed the best ability for the removal of iron oxides at pH 7 (∼76%–84%) with almost 56%–69% separation efficiency, respectively.