Interferometric Synthetic Aperture Radar (InSAR) and Differential Interferometric Synthetic Aperture Radar (DInSAR) have shown numerous applications for subsidence monitoring. In the past 10 years, the Persistent Scatterer InSAR (PSI) and Small BAseline Subset (SBAS) approaches were developed to overcome the problem of decorrelation and atmospheric effects, which are common in interferograms. However, DInSAR or PSI applications in rural areas, especially in mountainous regions, can be extremely challenging. In this study we have employed a combined technique, i.e., SBAS-DInSAR, to a mountainous area that is severely affected by mining activities. In addition, L-band (ALOS) and C-band (ENVISAT) data sets, 21 TerraSAR-X images provided by German Aerospace Center (DLR) with a high resolution have been used. In order to evaluate the ability of TerraSAR-X for mining monitoring, we present a case study of TerraSAR-X SAR images for Subsidence Hazard Boundary (SHB) extraction. The resulting data analysis gives an initial evaluation of InSAR applications within a mountainous region where fast movements and big phase gradients are common. Moreover, the experiment of four-dimension (4-D) Tomography SAR (TomoSAR) for structure monitoring inside the mining area indicates a potential near all-wave monitoring, which is an extension of conventional InSAR.
TerraSAR-X satellite SAR (Synthetic Aperture Radar) scenes have been analysed using Persistent Scatter Interferometry (PSI) approach to monitor a tunnelling process in Düsseldorf, Germany. The aim of this work is to detect the deformation of ground surface and structures above the tunnelling line during the tunnel excavation. In this study, the PSI approach integrated in the open source software package Stanford Method for Persistent Scatterers (StaMPS) was employed since it has shown significant advantages in obtaining Persistent Scatterers (PS). In order to protect the historic buildings in this region from subsidence-induced damages, a Tunnel Boring Machine (TBM) was used to restrain serious displacements during the tunnelling excavation, as well as compensation injections. Both surface uplifting and subsidence were observed during this tunnelling process, by a levelling survey and a validated PSI observation. It is concluded that sub-centimetre accuracy observations are achievable for process-related monitoring in urban areas, using the open source software package.
Interferometric Synthetic Aperture Radar (InSAR) has shown unique capabilities in numerous applications for deformation monitoring. However, InSAR will lose effectiveness with large-gradient deformation due to the limitation of maximum detectable phase gradient and the phase unwrapping step of InSAR. Coalfield is the exact object providing such challenges for InSAR technique. Strong mining activities often induces large scale non-linear deformation with large gradient. This paper integrates offset tracking technique based on Corner Reflector (CR) and InSAR to overcome relevant problems. By applying offset tracking to high resolution TerraSAR-X intensity images, the coarse estimation of large deformation was obtained and extracted, allowing the following InSAR processing to carry out phase unwrapping correctly. Finally, the fine estimation of deformation was done by the Persistent Scatterer InSAR (PSI) technique. The detected deformation time series indicated good root-mean-square errors (RMSE), validated by GPS in situ investigation. All InSAR data were processed in the open source software StaMPS and one in-house InSAR package.