During robot welding operations in the manufacturing industry there is a need to modify on-line the welding path due to a mismatch in the position of the components to be welded. These positioning errors are due to multiple factors such as ageing of the components in the conveyor system, clamp fixtures, disturbances, etc. Therefore, robot reprogramming is needed which requires a stop in the production line and consequently an increment in production costs. This article is an extension of [1]a and presents an alternative solution to this problem that involves the use of structured lighting using a low-cost laser beam, a CMOS camera and a Gaussian singleton fuzzy logic controller. To validate the proposed control system, a robotic cell was designed using an industrial KUKA KR16 robot for welding metallic plates. The method was evaluated experimentally under lateral and vertical positioning errors.
17 October 2016 in International Journal of Computers Communications & Control
This paper presents an unsupervised algorithm of colour image segmentation. This method combines the advantages of the approaches based on split and merge and region growing, and the use of the RGB and HSV colour representation models. The effectiveness of the proposed method has been verified by the implementation of the algorithm using three different testing images with homogeneous regions, spatially compact and continuous. It was observed that the proposed algorithm outperforms the other analysed techniques requiring shorter processing time when compared with the other methods.
5 May 2025 in International Journal of Computers Communications & Control
This paper presents a new method for early detection of broken rings and bars in induction motors operating in steady state. The approach uses multispectral analysis based on the Discrete Wavelet Transform (DWT) applied to stator current analysis. A comparison is made between the results obtained using Daubechies wavelets of levels 44 and 45 (db44 and db45). The method focuses on the energetic analysis of the high-level signal decomposition coefficients to detect the presence of left sideband components, which indicate rotor faults. The experimental results demonstrate the effectiveness of the method in distinguishing between healthy and faulty motor conditions, even under light load conditions where conventional techniques often struggle.
Fractal behavior and long-range dependence are widely observed in measurements and characterization of traffic flow in high-speed computer networks of different technologies and coverage levels. This paper presents the results obtained when applying fractal analysis techniques on a time series obtained from traffic captures coming from an application server connected to the Internet through a high-speed link. The results obtained show that traffic flow in the dedicated high-speed network link have fractal behavior when the Hurst exponent is in the range of 0.5, 1, the fractal dimension between 1, 1.5, and the correlation coefficient between –0.5, 0. Based on these results, it is ideal to characterize both the singularities of the traffic and its impulsiveness during a fractal analysis of temporal scales. Finally, based on the results of the time series analyses, the fact that the traffic flows of current computer networks exhibit fractal behavior with a long-range dependency is reaffirmed.