Origami structures morph between 2D and 3D conformations along predetermined fold lines that efficiently program the form of the structure and show potential for many engineering applications. However, the enormity of the design space and the complex relationship between origami-based geometries and engineering metrics place a severe limitation on design strategies based on intuition. The presented work proposes a systematic design method using topology optimization to distribute foldline properties within a reference crease pattern, adding or removing folds through optimization, for a mechanism design. Optimization techniques and mechanical analysis are co-utilized to identify an action origami building block and determine the optimal network connectivity between multiple actuators. Foldable structures are modeled as pin-joint truss structures with additional constraints on fold, or dihedral, angles. A continuous tuning of foldline stiffness leads to a rigid-to-compliant transformation of the local foldline property, the combination of which results in origami crease design optimization. The performance of a designed origami mechanism is evaluated in 3D by applying prescribed forces and finding displacements at set locations. A constraint on the number of foldlines is used to tune design complexity, highlighting the value-add of an optimization approach. Together, these results underscore that the optimization of function, in addition to shape, is a promising approach to origami design and motivates the further development of function-based origami design tools.

Origami folding provides a novel method to transform two-dimensional (2D) sheets into complex functional structures. However, the enormity of the foldable design space necessitates development of algorithms to efficiently discover new origami fold patterns with specific performance objectives. To address this challenge, this work combines a recently developed efficient modified truss finite element model with a ground structure-based topology optimization framework. A nonlinear mechanics model is required to model the sequenced motion and large folding common in the actuation of origami structures. These highly nonlinear motions limit the ability to define convex objective functions, and parallelizable evolutionary optimization algorithms for traversing nonconvex origami design problems are developed and considered. The ability of this framework to discover fold topologies that maximize targeted actuation is verified for the well-known “Chomper” and “Square Twist” patterns. A simple twist-based design is also discovered using the verified framework. Through these case studies, the role of critical points and bifurcations emanating from sequenced deformation mechanisms (including interplay of folding, facet bending, and stretching) on design optimization is analyzed. In addition, the performance of both gradient and evolutionary optimization algorithms are explored, and genetic algorithms (GAs) consistently yield solutions with better performance given the apparent nonconvexity of the response-design space.

Resonant acoustic metamaterials (AMMs) are structures with intrinsic resonances designed to interact with acoustic wavefields to enable applications like low-frequency sound mitigation using materials much smaller than the wavelength affected. However, the addressable frequency range of the AMM is set at the time of manufacture by the geometry, materials, and construction. In this work, a reconfigurable magnetorheological elastomer (MRE)-based AMM is proposed to alter the addressable frequency range without the need for remanufacture. By changing the spatial placement and the mass of neodymium magnets attached to the MRE plate by magnetic attraction, it is possible to engineer the mode shape of the MRE-AMM and tune the absorption, transmission loss, and effective density. It is shown through simulations and experiments that the MRE-AMM can affect wavelengths in air up to 13 170× greater than its own thickness.